Y10A329-B1 Rocstor SolidKVM SK06 4K HDMI and USB 3.0 2X1 KVM Switch User Manual

Y10A329-B1 Rocstor SolidKVM SK06 4K HDMI and USB 3.0 2X1 KVM

Important Safety Notice

WARNING : Please follow these safety instructions. Failure to do so may result damages or injury. It is normal that the SolidKVM SK06 unit adapter becomes very warm during use.

Please note that:

Continuous contact with warm surfaces for extended time may cause discomfort or injury. In order to reduce the possibility of overheating or heat-related injuries, always allow needed ventilation around the SolidKVM SK06 unit and use care when handling it. Avoid instances where your skin is in extended contact with the hub when plugged into the host computer. It is not recommended to sleep with the adapter when plugged into a host computer. Avoid placing the hub adapter under a pillow, blanket, or your body when connected to a host computer. If you have a medical condition that affects your ability to detect heat against the body, extra care should be used. Never use the adapter in locations with water, such as a sink, bathtub, or shower stall. Never connect or disconnect the adapter with wet hands.

Introduction

Rocstor introduces a high-performance HDMI-KVM switcher. It seamlessly routes high-definition video (in various resolutions up to 4kx2k@60Hz) and audio from multiple sources to display units. This HDMI-KVM switcher features not only key-press switching functionality but also intelligent and hot-pluggable capabilities.

Package Contents

Before utilizing this unit, kindly inspect the packaging to ensure the following items are included:

• Main Unit x1
• 5V/3A Power Adapter x1
• IR Remote Control x1
• IR Extender x1
• USB 3.0-B Male to USB 3.0-A Male Cable x2
• User Manual x1
• Ear Hanger Bracket x2 (Optional)

Features

• Supports resolution up to 4Kx2K@60Hz
• Supports RGB 4:4:4/ YCbCr 4:4:4/ YCbCr 4:2:2/ YCbCr 4:2:0
• Supports KVM function
• Supports a HDMI display and a set of Keyboard and Mouse to control two PCs with HDMI ports
• Supports 6Gbps per channel (18Gbps all channels) bandwidth
• Supports 12bit per channel (36bit all channels) deep color
• Supports HDCP 2.2/1.4
• Supports 3D
• Supports HDR
• Supports infrared remote control function
• Supports for switching LED indications
• Supports Windows 2000/XP/Vista/Win7/Win8/Win10/Linux/Apple Mac OS

Panel Description (Front Panel)

Front Panel

1. Power Button: Press to turn on/of the unit.

2. Power Indicator: The LED will light up once the DC/5V is provided and the unit is turned on.

3. II input Selection: When PC1/PC2/PC3/PC4 is selected, the corresponding “Select” lights up to indicate input selection(“Select” LEDs flash in a loop under automatic switching mode). “Online” LED lights up when the corresponding USB-B port is connected.

4. IR EXT: Connect IR Extender to this port for IR signal reception from the remote control.

5. IR: For IR signal reception from the remote control.

6.  3.5mm MIC input port.

7.  3.5mm stereo output port.

8. USB 3.0 ports, mainly used for connecting to printers, scanners, U-disk, etc.
   Back Panel

9. Output ports:
   Connect to a mouse or a keyboard.
   Connect to a keyboard or a mouse.
   Connect to an amplifier.
   Connect to a MIC.
   Connect “HDMI Out” to HDMI display.

10. PC1 input ports: Respectively connect to HDMI, USB, MIC, stereo ports of PC1.

11. PC2 input ports: Respectively connect to HDMI, USB, MIC, stereo ports of PC2.

12. DC 5V: Plug the 5V DC power supply into the unit.

Specifications

Connectors

Console Connectors| USB 2.0-A x2 (Back)
HDMI Female x1(Back)
3.5mm Stereo Jack 2x (Green, 1 Front, 1 Back)
KVM Connectors| USB 3.0-B x2 (Back)
HDMI Female x2 (Back)
3.5mm Stereo Jack x2 (Green, Back)
3.5mm Stereo Jack x2 (Pink, Back)
USB HUB Connectors| USB 3.0-A x2 (Front)
Resolution
Max Resolution| 3840×2160@60Hz
4096×2160@60Hz
Operating Frequency
HDMI Bandwidth| 18G
Mechanical
Material| 7×2.9x1in – (178x75x26mm)
Size (L-W-H)| 7×2.9x1in – (178x75x26mm)
Weight (Net)| 12.9lbs – (366.3g)
Warranty
Limited Warranty| 3 Years
Environmental
Operating Temperature| 0°C to 45°C (32°F to 113°F)
Operating Humidity| 10% to 85% RH (no condensation)
Storage Temperature| -10°C to 80°C (14°F to 176°F)
Storage Humidity| 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply| DC 5V
Power Consumption (Max)| 12W
ESD Protection| ±8kV (air-gap discharge) & ±4kV (contact discharge)
Regulatory Approvals
Cortication’s| FCC, CE
Power Supply| FCC, CE
Accessories
User Manua| English Version

Installation Procedures

Operation

1. Begin by establishing connections between your Host Computers and the Solid KVM SK06 Switch. Utilize USB cables to connect the Host Computers to the USB-B ports of the KVM Switch. Subsequently, link the MIC and stereo ports of the Host Computers to the corresponding ports located above the KVM Switch “HDMI In” using 3.5mm audio cables. Complete this step by connecting the Host Computers to the KVM Switch “HDMI In” ports using HDMI cables. Upon completion, the “Online” indicators will light up, confirming successful connections.

2. Proceed to connect peripheral devices. Attach the keyboard and mouse to the USB-A ports located on the back panel of the KVM Switch. Then, respectively connect microphones and amplifiers to either the MIC and stereo ports on the front panel or above the Switch “HDMI Out” using 3.5mm audio cables. For display connectivity, link a display to the Switch “HDMI Out” using an HDMI cable.

3. Power on the KVM Switch by supplying it with DC 5V and pressing the power button. Upon activation, the “Power” indicator will light up, confirming that power is operational. Ensure that the USB-B ports are connected properly, and the “Online” indicators will light up. The “Select” indicator will light up to denote the currently selected Host Computers.

4. Utilize the buttons located on the Switch front panel to select the input source. Upon selection, the corresponding “Select” indicator will light up, and the display will showcase the corresponding image. Subsequently, the selected Host Computers can be controlled using a keyboard and mouse.

5. The remote control functionality mirrors the manual buttons, facilitating input selection and control with equal efficiency and precision.
   

6. For external function, connect printer/scanner/U-disk to the USB-A ports on the Switch front panel.

Special Function Operation

1. Mouse Traversal Function:
   Place the mouse on the far right side of the display and continue to slide to the right for 2 seconds, the Switch automatically switches to the next port. Switching order is : PC1→PC2→PC1→…;

2. USB-B detection switching function:

3. When the KVM Switch detects that a PC is connected to the USB-B port of the Switch, it immediately switches to this PC and the corresponding “Online” and “Select” indicators light up. For instance, if PC1 is already connected and PC2 is subsequently connected to the KVM Switch via the USB-B port, it swiftly switches to PC2.

4. When the current selected PC is powered o or the USB cable is dialed out, the KVM Switch automatically switches to the next PC with the power on and the USB port connected.

5. Hotkey function (It doesn’t work on functional keyboard and only the 2 USB-A ports on the back panel can get access to this function.)

seconds)
5| Scroll Lock++ Scroll Lock +I+[N]+[Enter]| Set the automatic switching interval (5~999 seconds)
6| Scroll Lock++ Scroll Lock +B+[1/0]| Buzzer on/off (Default: on)
7| Scroll Lock++ Scroll Lock +F+L+A+S+H+[Enter]| All resume hotkey default mode

Note: Hotkeys are not case-sensitive; Buzzer sounds when switching between PC1 and PC2.

Connection Diagram (Front Panel)

Connection Diagram (Back Panel)

Disclaimer

©2024 Rocstor, Inc. All rights reserved. Rocstor is registered trademark of Rocstor, Inc. Apple®, the Apple logo, Mac®, MacBook®, MacBook Pro®, MacBook Air®, iPad®, iPad Air®, iPad mini®, iPad Air®, iPhone®, MacOS® are registered trademarks of Apple, Inc. Google® and Chromebook™ are registered trademarks of Google, LLC. Microsoft® is registered trademarks of Microsoft corporation. Al other product names and logos mentioned herein may be trademarks of their respective companies. Thunderbolt is a trademark of Intel Corporation or its subsidiaries. USB Type-C® and USB-C® are registered trademark of USB Implementers Forum. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Feature and specification are subject to change without notice. All trademarks and registered trademarks are the property of their respective. All rights reserved.

Contact Information

Corporate, Government and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers find a storage solution that best serves their needs. We will help you determine your best purchasing options. For more information please contact the appropriate department below or call us at +1 818-727-7000.

Customer Support

Corporate Headquarters
12979 Arroyo Ave
San Fernando, CA 91340 – USA
Office: +1 818-727-7000
Fax: +1 818-875-0002
Email: info@rocstor.com

Technical Support / Sales Info / RMA
Hours: 9:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)

Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@rocstor.com
General Sales Information: sales@rocstor.com
Corporate sales information: corporate_sales@rocstor.com
Educational sales information: academic_sales@rocstor.com
Federal, State & Local government sales information: government_sales@rocstor.com
Resellers/Business Development/OEM Partners
All Channel National and International Resellers, VARs, Consultants…
Contact Rocstor Channel Sales:
Call: +1 818-727-7000
Email: reseller_info@rocstor.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>