PHILIPS BGP292 LED39-4S, 740 II DN10 SW302F CLO D LumiStreet gen2 Owner’s Manual
- July 14, 2024
- Philips
Table of Contents
Lighting
LumiStreet gen2
BGP292 LED39-4S/740 II DN10 SW302F CLO D
LumiStreet gen2 Mini, LED module 3900 lm, 740 neutral white, Safety class II, Distribution narrow 10, Side-entry for diameter 76 mm
Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
General Information
| Lamp family code | LED39 [LED module 3900 lm] |
|---|---|
| Light source replaceable | Yes |
| Number of gear units | 1 unit |
| Driver included | Yes |
| Remarks | * At extreme ambient temperatures the luminaire might |
automatically dim down to protect components
Light source engine type| LED
Service tag| Yes
Product family code| BGP292 [LumiStreet gen2 Mini]
Lighting Technology| LED
Value ladder| Specification
Serviceability class| Class A, luminaire is equipped with serviceable
parts (when applicable): LED board, driver, control units, surge protection
device, optics, front cover and mechanical parts
Light Technical
| Upward light output ratio | 0 |
|---|---|
| Luminous Flux | 3,306 lm |
| Standard tilt angle post top | 0° |
| Standard tilt angle side entry | 0° |
| Luminous Efficacy (rated) (Nom) | 147 lm/W |
| Correlated Color Temperature (Nom) | 4000 K |
| Color rendering index (CRI) | 70 |
| Light source color | 740 neutral white |
| Optical cover type | Flat glass |
| Luminaire light beam spread | 68° x 158° |
| Optic type outdoor | Distribution narrow 10 |
Operating and Electrical
| Input Voltage | 220 to 240 V |
|---|---|
| Line Frequency | 50 to 60 Hz |
| Initial CLO power consumption | 23.5 W |
| Average CLO power consumption | 23.5 W |
| End CLO power consumption | 24 W |
| Inrush current | 21 A |
| Inrush time | 0.225 ms |
| Power Consumption | 23 W |
| Power Factor (Fraction) | 0.96 |
| Connection | 2 Push-in connector 5-pole |
| Cable | – |
| Number of products on MCB of 16 A type B | 30 |
Temperature
| Ambient temperature range | -40 to +50 °C |
|---|
Controls and Dimming
| Dimmable | Yes |
|---|---|
| Driver/power unit/transformer | Power supply unit regulating with |
constant light output
Control interface| –
Constant light output| Yes
Mechanical and Housing
| Housing Material | Aluminum die cast |
|---|---|
| Reflector material | Polycarbonate |
| Optic material | Polymethyl methacrylate |
| Optical cover material | Glass |
| Fixation material | Aluminum |
| Housing Color | Gray |
| Mounting device | Side-entry for diameter 76 mm |
| Optical cover shape | Flat |
| Optical cover finish | Clear |
| Overall length | 620 mm |
| Overall width | 234 mm |
| Overall height | 95 mm |
| Effective projected area | 0.0251 m² |
| Dimensions (Height x Width x Depth) | 95 x 234 x 620 mm |
Approval and Application
| Ingress protection code | IP66 [Dust penetration-protected, jet-proof] |
|---|---|
| Mech. impact protection code | IK08 [5 J vandal-protected] |
| Surge Protection (Common/Differential) | Luminaire surge protection level |
until 6 kV differential mode and 8 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class II
Flammability mark| For mounting on normally flammable surfaces
CE mark| Yes
ENEC mark| ENEC plus mark
Warranty period| 5 years
EU RoHS compliant| Yes
Initial Performance (IEC Compliant)
| Luminous flux tolerance | +/-7% |
|---|---|
| Initial chromaticity | (0.381, 0.379) SDCM <5 |
| Power consumption tolerance | +/-10% |
| Init. Color Rendering Index Tolerance | +/-2 |
Over Time Performance (IEC Compliant)
| Driver failure rate at 5000 h | 0.5 % |
|---|---|
| Control gear failure rate at median useful life 50000 h | 5 % |
| Control gear failure rate at median useful life 100000 h | 10 % |
| *Lumen maintenance at median useful life 50000 h** | L100 |
| *Lumen maintenance at median useful life 100000 h** | L100 |
Application Conditions
| Performance ambient temperature Tq | 25 °C |
|---|---|
| Maximum dim level | 0% (digital) |
Product Data
| Order product name | BGP292 LED39-4S/740 II DN10 SW302F CLO D |
|---|---|
| Full product name | BGP292 LED39-4S/740 II DN10 SW302F CLO D |
| Full product code | 871951410037400 |
| Order code | 910925866772 |
| Material Nr. (12NC) | 910925866772 |
| Numerator – Quantity Per Pack | 1 |
| Net Weight (Piece) | 7.260 kg |
| EAN/UPC – Product/Case | 8719514100374 |
| Numerator – Packs per outer box | 1 |
| EAN/UPC – Case | 8719514100374 |
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, May 27 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>