WLMOUSE BEAST X 8K Magnesium Wireless Gaming Mouse Owner’s Manual

July 13, 2024
WLMOUSE

WLMOUSE BEAST X 8K Magnesium Wireless Gaming Mouse

Specifications

  • Model: BEAST X 8K
  • Dimensions: 122 mm x 62 mm x 37 mm
  • Connection : Wired (USB 3.0) or Wireless (USB 3.0)

Product Usage Instructions

Wireless Connection Setup

To achieve optimal performance, follow these steps:

  1. Ensure the distance between the receiver and the mouse is within 50 cm.
  2. Avoid wireless interference devices near the mouse.
  3. Connect to a USB 3.0 port or higher.

Dongle Pairing

If the mouse cannot be used in wireless mode, follow these steps:

  1. Hold on to the dongle for 3-4 seconds.

Pairing Steps

  1. Unplug the mouse from the computer and switch it to wireless mode.
  2. Hold the left and right mouse buttons, along with the front side button for 3 seconds.
  3. Connect the dongle to the computer when the LED on the mouse flashes faster.
  4. Pairing is complete when the LED turns off.

DPI Setting

To adjust DPI levels:

  1. The default DPI is 1600 DPI.
  2. Adjust DPI levels in the driver settings.

Polling Rate Setting

To set polling rate:

  1. For wired connection: Choose from 125 Hz, 250 Hz, 500 Hz, or 1000 Hz.
  2. For wireless connection: Choose from 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 2000 Hz, 4000 Hz, or 8000 Hz.

LOD (Lift off Distance) Setting

[LOD setting information can be added here.]

FAQ

  • Q: How do I switch DPI levels?
  • A: Press and hold the left mouse button, right mouse button, and scroll wheel simultaneously for 3 seconds.
  • Q: How do I change the polling rate?
  • A: Press and hold the mouse side button, scroll wheel, and right button simultaneously for 3 seconds to switch polling rates.

DIMENSION

  • Length: 4.8 inch / 122mm
  • width: 2.44 inch / 62mm
  • height : 1.46 inch / 37mm
  • weight : 39 ±1g
  • Connectivity: 2.4Hz Wireless/Wired
  • Interface : USB Type-C
  • Microcontroller Unit (MCU): Nordic 52840
  • Sensor: PAW 3395
  • Counts Per Inches (CPI) :50-26000CPI (Adjustable)
  • Acceleration: 50G (Max)
  • Polling Rate :125 – 8000Hz (Adjustable)
  • Encoder: TTC Dust Proof Silver
  • Switches (Main): TTC Nihil Transparent Black Dot
  • Switches (Side): Omron Blue Dot
  • Mouse Buttons :4 + Scroll Wheel
  • Battery: Lithium-Ion Polymer 300Mah Capacity
  • Reciever: Nordic 52820, High Speed Chip

WIRED

WLMOUSE-BEAST-X-8K-Magnesium-Wireless-Gaming-Mouse-
FIG-4

WIRELESS

WLMOUSE-BEAST-X-8K-Magnesium-Wireless-Gaming-Mouse-
FIG-Dongle Pairing

If the mouse cannot be used in wireless mode, please use the following method to pair the dongle.

  1. Left Button
  2. Right Button
  3. Forward Button

Pairing Steps

  1. Unplug the mouse from the computer. Switch the mouse back into wireless mode to start the process of pairing.
  2. Hold the left and right mouse buttons, along with the front side button for 3 seconds.
  3. Once the green LED on the mouse starts flashing faster than normal, connect the 4k dongle to the computer with the included cable.
  4. When the LED on the mouse turns off, the pairing has been completed

DPI Setting

The default DPI is set to 1600 DPI, and you can adjust the DPI levels in the driver settings.

  1. Left Button
  2. Right Button
  3. Scroll Wheel

There are 6 DPI levels. To switch the DPI, press and hold the left mouse button, right mouse button, and scroll wheel/middle mouse button simultaneously for 3 seconds.

Polling Rate Setting

  1. Right Button
  2. Scroll Wheel
  3. Back Button

Polling Rate Levels

wired connection

  • 125 Hz
  • 250 Hz
  • 500 Hz
  • 1000 Hz

Wireless connection

  • 125 Hz
  • 250 Hz
  • 2000 Hz
  • 4000 Hz
  • 500 Hz
  • 8000 Hz
  • 1000 Hz

The mouse polling rate is default set to 1000Hz. To switch the polling rate, press and hold the mouse side button, scroll wheel/middle button, and right button simultaneously for 3 seconds.

LOD (Lift off Distance) Setting

  1. Left Button
  2. Scroll Wheel
  3. Forward Button

LOD Levels

  • 1 mm
  • 2 mm

The default Lift-Off Distance (LOD) is 1mm. To switch it, press and hold the mouse front side button, left button, and scroll wheel/middle button simultaneously for 3 seconds

Switching Between 1K and 8K Dongle

  • WLMOUSE-BEAST-X-8K-Magnesium-Wireless-Gaming-Mouse-FIG-9Scroll Wheel
  • Forward Button
  • Back Button

To switch between the 1K Nano dongle and the 8K dongle, simultaneously press and hold the mouse’s front side button, back side button, and scroll wheel/middle buttonThanks for choosing WLMOUSE.
If you have any questions or comments, if you need any help with your products, please do not hesitate to contact us.

CONTACT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals