Saihunt DLTA1 Smart Recessed Lighting User Guide

SAIHUNT SMART

RECESSED LIGHTING

START GUIDE

What’s in the Box

• SAIHUNT SMART RECESSED LIGHTING START GUIDE

Get Ready

• Know your Wi-Fi network and password
• Make sure your mobile device is running iOS 13.3 or higher and Android 9.0 or higher
• Make sure you’re connecting to a 2.4GHz Wi-Fi network (Saihunt can’t connect to 5GHz networks)

Attention

1. Do handle carefully in transportation.
2. Do not disassemble the fixture for non-professional.
3. The fixture work under AC high voltage and current, it should be installed where can’t be touched easily. The connection must be completely sealed and be earthed.
4. the external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
5. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
6. The surface where it’s positioned must be firm enough to ensure safety
7. Ensure the voltage of the electricity system is in the range of working voltage for the fixture. Otherwise, lifetime of fixtures will be influenced.
8. Installation and maintenance should be operated by a professional.

Wow! This is an innovative LED downlight – WiFi, Bluetooth (SIC) smart downlight

1. The light and the gateway are combined into one, and the functions of the gateway and the light are realized at the same time.

2. There is no need to purchase an additional gateway to realize remote control, it can be realized directly through the main light of the gateway, and other Bluetooth Mesh sub-devices are connected to the main light of the gateway through Mesh.

3. A gateway light supports access to 128 Bluetooth Mesh sub-devices.

4. How to quickly find the gateway main light in the received product? –We will add a WiFi suffix after the product model on the product label
   (you can get a picture comparison here)

5. When connecting to the APP, add all the devices with one click, first, realize the connection of the Bluetooth Mesh sub-device, then connect the main light of the gateway, and finally click to complete the connection.

6. When you have completed the linking of all devices, please enter the gateway main light/Bluetooth Mesh sub-device page to find the creation group, and add a Bluetooth Mesh sub-device for remote control.

Note: If the Bluetooth Mesh sub-device is not added to the group control, the remote control cannot be realized.

1. WIFI/Mesh(SIG)
2. Gateway Main Light
3. Bluetooth Mesh Sub Device
4. Data is transmitted to and from each device
5. Only one gateway main light is connected to the router, other sub-devices an connected to the gateway main light

Precautions:

1: When the Bluetooth Mesh sub-device is far away from other sub-devices or the gateway main light, the device will be in a disconnected state on the APP. When the normally connected device is close to the disconnected device, it will immediately help restore the online state!
2. If the gateway main light is offline, it will not affect the use of other lights, because other devices will immediately trigger the active election mechanism and a new gateway main light will be re-elected through cloud AI computing and the sub-devices will switch without feeling! Go to the new gateway main light to keep the device stable and controllable.

Installation diagram

Using wire nuts, connect wires with the same color on box.

Insert hardwire box through the mounting hole.

Connect the fixture to the hardwire box by inserting and twisting the male/female connectors.

Push spring loaded clips on the fixture and insert fixture base in to the mounting hole.

1 Download the Tuya Smart App

2 Register a Tuya Smart account

Enter your mobile phone number or email address.

Log into the App.

Note: Please select your region and country.

3 Connect: Easy Mode

STEP 1
Open the Tuya Smart App. In the top corner of the Devices screen, click (+).

STEP 2
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “EZ Mode”

STEP 3
Make sure light is rapidly flashing white.
If not, reset to reach Easy Mode to connect.
Press “Next” in the App.

STEP 4
Enter your Wi-Fi network and password.

STEP 5
The Tuya Smart App will connect to your devices.

NOTE: Saihunt can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.

4 Connect: AP Mode

STEP 1
Open the Tuya Smart App. In the top corner of the Devices screen, click (+).
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “AP Mode”

STEP 2
Make sure light is slowly flashing white.
If not, reset to reach AP mode.

STEP 3
Press “Next” and enter your Wi-Fi details.

STEP 4
Follow the instructions to choose the device from your Wi-Fi list.

STEP 5
The Tuya Smart App will connect to your devices.

NOTE: Saihunt can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.

5 Connect: Bluetooth

STEP 1
Open the Tuya Smart App. In the top corner of the Devices screen, click (+).
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “Bluetooth”

STEP 2
Make sure light is rapidly flashing white.
If not, reset to reach Easy Mode to connect.
Press “Next” in the App.

STEP 3
Enter your Wi-Fi network and password.

Please follow the application guidelines for the next steps.
If you have any questions, please contact us in time.

Frequently Asked Questions

1. Can I share with family and friends?****

Yes, you can share access to your Switch and any other Saihunt device. In the Tuya Smart App, press the “Profile” button and click on “Device Sharing” to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Tuya Smart App and registered an account.

2. Can I group multiple Saihunt devices together?****

Yes, you can group multiple same-type devices by room, location, or however else you want. The same devices can be in multiple groups. For example, if you create a group for “Bedroom” and another group for “Entire House”, your Bedroom lights can be included in both groups. From your main device list, click on one of the devices you want to group, press the ” ••• ” button on the top right for advanced settings, and click “Create Group”. You’ll be able to name a new group and choose which devices you’d like to group together.

3. How many devices can I control?****

Tuya Smart App can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

4. My Saihunt device has a funny name. How do I rename it?****

From your main device list, click on one of the devices you want to rename, press the ” ••• ” button on the top right for advanced settings, and click “Modify Device Name” (or “Modify Group Name”). You’ll then be able to choose a more familiar name.

5. What should I do if the device Appears offline or is unreachable?****

Make sure your Wi-Fi router is online and in range, and check that you have the latest Tuya Smart functionality by clicking “Check for firmware update” in your device settings. If power is connected but the switch is not responding, hold down the Restart button to cycle the fuse and give the switch a jump start.

6. What’s the wireless range?****

The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

7. If my Wi-Fi internet goes down, will Tyra smart App still work?****

Saihunt products need to be connected to Wi-Fi in order to use them remotely.

8. What does the white light mean?****

The white light indicates power. If the white light is on, the switch is receiving power; if it is off, it is not receiving power. The white light also indicates connection. If it is solid, the switch is connected; if the it is flashing quickly, the switch is ready to connect using the Easy Mode; if it is flashing slowly, the switch is ready to connect using the AP Mode.

9. What should I do, when I find a problem with the purchased product?****

Please email us ( support@saihunt.com )with your Amazon order ID. We are dedicated to ensuring your 100% satisfaction. Rest assured if the problem is with this product, we’ll be more than happy to exchange it for a new one immediately.

Important Information

Troubleshooting

Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems.
If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

Reset the device

To reconnect to Wi-Fi, Reset the device through the wall switch, on-off-on- off-on.
– Reset once (press switch on-off-on-off-on) to reach Easy Mode, indicated by rapidly blinking white light. Refer to connect in Easy Mode.
– Reset again (press switch on-off-on-off-on) to reach AP Mode, indicated by slowly blinking white light. Refer to connect in AP Mode.

Technical Specifications

• Wi-Fi: IEEE 802.11b/g/11n(HT20), 2.4GHz (not compatible with 5GHz Wi-Fi networks)
• Made in China

Support:
If you encounter any issues, please contact us at:
support@saihunt.com

VOICE CONTROL GUIDE

Name and Control Each Device by Voice

Thank you for purchasing your Saihunt smart product. Make sure your devices are already set up using the Tuya Smart App, then follow these steps.

Voice Control Quick Guide for Google Assistant

To control your smart switch or surge protectors, just say “OK Google”, and ask.

Make sure your devices are already set up using the Tuya Smart app.

Google Assistant

Things you can say*:
“Hey Google, turn on all the lights in my bedroom.”
“Hey Google, turn off the light “
“Hey Google, set the bedroom light to orange.”
“Hey Google, turn off the coffee machine.”
“Hey Google, set the living room to 50%.”
“Hey Google, dim porch light.”

*Some commands require compatible devices.

1 Open the Google Home App and go to Home Control in the menu.

2 Tap the “+” button

3 Choose “Tuya Smart” in the list of Home Control partners.

4 Authorize your account with Google Assistant using the username and password from your Tuya Smart app.

Now your Google Home app and Saihunt devices are linked!

You’re now able to say “OK Google” and control your Saihunt devices.

Note: Please select your region and country.

At any time, go into the “Home Control” section of the Google Home app to set nicknames and rooms for your devices.

You can rename your devices in the Tuya Smart app, and Google Assistant will refer to them by the same name.

So if you rename a smart bulb to “Living Room” or a nickname like “Blossom”, then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well.

You can also assign switch to a specific room, like “Bedroom” or “Kitchen”.

Google Assistant will be able to control devices by room.

Amazon Alexa

To control your smart switch or surge protectors, just ask Alexa.

Make sure your devices are already set up using the Tuya Smart app.

Things you can say*:
“Alexa, discover my devices.”
“Alexa, turn on the bedroom light.”
“Alexa, set the bedroom light to orange.”
“Alexa, turn off the coffee machine.”
“Alexa, set the living room to 50%.”
“Alexa, dim porch light.”

*Some commands require compatible devices.

There are 2 ways to enable “Tuya Smart” Skill:
Way 1:

1. Log in to Tuya Smart App, click your smart device click “ ” in top right corner
2. Click Alexa in Third-party Control.
3. Sign in with your Alexa account.

4. Click LINK.
5. Linked successfully, when add new device, it is no need to link again, just discover new device in Alexa.

Way 2:

1 Open the Alexa App and go to Skills in the menu.

2 Search for Tuya Smart then click Enable.

3 Authorize your account with Smart Home Skills using the username and password from your Tuya Smart App.

Note: Please select your region and country.

4 Choose “Discover Devices”. After a few seconds your Saihunt devices will be displayed under Smart Home in the Alexa app.

You can rename your devices in the Tuya Smart app, and Alexa will refer to them by the same name.

So if you rename a smart switch to “Living Room” or a nickname like “Blossom”, then Alexa will use that same nickname later on.

Alternatively, you create an Alexa group, like “Bedroom” or “Downstairs”, and add the device to the group.

Alexa will recognize the group name in the Alexa app, or the device name in the Tuya Smart app.

More information is available at:

http://tinyurl.com/aexa-smart-home-groups

If you have any questions about use and operation, you can contact us!

1. Customer Service Email:

support@saihunt.com

2. Contact Amazon sellers in Amazon mail for purchase or after-sales issues

After the customer places an order, there will be a “Contact seller” option on the page, mainly by sending an email to contact the seller, or on the product page, click the seller’s name to see the seller’s contact information.

After logging in to your Amazon account, click “My Orders”;

If the product is sold directly by Amazon, there is the seller’s contact information on the right.

You can also go directly to the shopping page of the product, and see “Seller XXX, Delivery XXX” on the details page, which means that it is sold by a third-party store seller.

Then click on the seller’s name to see the seller’s contact information in the lower right corner of the page.

After that, everyone can contact the seller and communicate about the product.

Note: The product does not support bluetooth, the bluetooth function has been disabled.

FCC WARNING

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

FCC ID: 2A8M5-DLTA1

Can’t connect? Need help?

HAVING AN EASY TALK TO US BEFORE YOU RETURN THE PRODUCT WILL FIX A PROBLEM MORE QUICKLY

Saihunt support:

support@saihunt.com

Visit us at: www.saihunt.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>