JBL VIBE BUDS True Wireless Headphones User Guide
- June 17, 2024
- JBL
Table of Contents
- JBL VIBE BUDS True Wireless Headphones
- Product Information
- Product Usage Instructions
- WHAT’S IN THE BOX
- How to wear
- FIRST TIME USE
- CONTROLS
- Manual SETUP
- Charging
- led behaviors
- TECH SPEC
- IC RF Exposure Information and Statement
- Head operation
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL VIBE BUDS True Wireless Headphones
Product Information
Specifications:
- Model: VIBE BUDS
- Driver size: 8 mm/ 0.315 Dynamic Driver
- Power supply: 5V 1A
- Earbud weight: 4.5 g per pc (9 g combined)/ 0.0099 lbs per pc (0.0198 lbs combined)
- Charging case weight: 34 g/ 0.075 lbs
- Earbud battery type : Lithium-ion polymer (47 mAh/ 3.8 V)
- Charging case battery type : Lithium-ion polymer (550 mAh/ 3.8 V)
- Charging time: Not specified
- Music playtime with Bluetooth on: Not specified
- Talk time: Not specified
- Frequency response: Not specified
- IP54 and IPX2 rated for water and dust resistance
Product Usage Instructions
What’s in the Box:
The package includes:
- S / M / L sized ear tips
APP – JBL Headphones:
To get even more control and personalization of your listening experience,
you can use the JBL Headphones app. This app is available for free.
How to Wear:
Try different sizes of ear tips (S / M / L) to find the perfect fit and
optimize audio performance.
First Time Use:
To power on and connect the earbuds for the first time:
- Make sure Bluetooth is enabled on your device.
- Open the Bluetooth settings on your device.
- Select “JBL VIBE BUDS” from the list of available devices to pair.
Dual Connect:
The earbuds support both Stereo Mode and L/R Mono Mode. Refer to the manual
for instructions on how to enable these modes.
Controls:
The earbuds have the following controls:
- HOLD (2S) – Enable advanced controls by connecting your JBL VIBE BUDS to the JBL Headphones app.
Power Off:
To power off the earbuds:
- HOLD (5S) – This will initiate a manual setup, allowing you to connect to a new Bluetooth device or perform a factory reset.
Charging :
The earbuds can be charged using the included charging case. The LED behaviors
indicate the charging status:
- Charging (WHITE) – The earbuds are currently being charged.
- Fully charged (WHITE) – The earbuds are fully charged.
- BT connecting (BLUE) – The earbuds are connecting to a Bluetooth device.
- BT connected (BLUE) – The earbuds are successfully connected to a Bluetooth device.
- BT not connected (BLUE) – The earbuds are not connected to a Bluetooth device.
- Low (RED) – The earbuds have low battery.
- Mid (ORANGE) – The earbuds have medium battery.
- High (GREEN) – The earbuds have high battery.
FAQ
-
Q: How long does it take to charge the earbuds?
A: The charging time is not specified in the user manual. Please refer to the product specifications or contact customer support for more information. -
Q: How long is the music playtime with Bluetooth on?
A: The music playtime with Bluetooth on is not specified in the user manual. Please refer to the product specifications or contact customer support for more information. -
Q: How long is the talk time?
A: The talk time is not specified in the user manual. Please refer to the product specifications or contact customer support for more information. -
Q: What is the frequency response of the earbuds?
A: The frequency response is not specified in the user manual. Please refer to the product specifications or contact customer support for more information.
WHAT’S IN THE BOX
APP
How to wear
1 Try different sizes for a perfect fit and audio performance
FIRST TIME USE
power on & CONNECT
DUAL CONNECT
CONTROLS
*
Enable advance controls by connecting your JBL VIBE BUDS to JBL Headphones App
.
VOICEAWARE
power off
Manual SETUP
DO MORE WITH THE APP
Charging
led behaviors
TECH SPEC
- Model: VIBE BUDS
- Driver size: 8 mm/ 0.315” Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 4.5 g per pc (9 g combined)/ 0.0099 lbs per pc (0.0198 lbs combined)
- Charging case: 34 g/ 0.075 lbs
- Earbud battery type: Lithium-ion polymer (47 mAh/ 3.8 V)
- Charging case battery type: Lithium-ion polymer (550 mAh/ 3.8 V)
- Charging time: <2 hrs from empty
Music playtime with
- BT on: 8 hrs
- Talk time: 4.5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 100 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: <10 dBm
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- Maximum operation temperature: 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS
IC RF Exposure Information and Statement
- The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-VIBEBUDSD) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.19 W/Kg.
- The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLVIBEBUDSD
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
- DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT |
- MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
- TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS