defender CH-129 Car Holder User Manual
- June 10, 2024
- Defender
Table of Contents
CH-129
Car holder
Operation manual
Installation of the holder on the air vent grille
1.1 Rotate the holder base counterclockwise in order to open the clips
1.2 Insert the
holder into the vent grill so that the deflector lamella is between the holder
clips
1.3 Rotate the holder base clockwise to secure the holder to the deflector
Equipping the smartphone with the metal plate
2.1 Remove the protective film from the adhesive part of the plate
2.2 Stick the plate on the phone case
2.3 The plate can also be glued to the smartphone case. Case must be firm and smooth. The plate can not be attached to silicone cases
ATTENTION!!! Do not stick the plate over the NFC sensor! Do not stick the plate on your smartphone in case it has wireless charging function!
2.4 In case smartphone has NFC or wireless charging functions, stick the plate
only on / under the smartphone case or put it under the case (the plate will
be fixed only by the case and will not interfere with the wireless charging or
NFC function without the case)
2.5 Remove the protective film from the metal plate
Installation of the smartphone onto the holder
3.1 Bring the smartphone close to the holder
3.2 Fix the cable in the hook
3.3 Connect the
cable to the smartphone when necessary 
CAR HOLDER OPERATION MANUAL
Terms and conditions of safe and efficient use of the product Usage
precautions:
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
- \Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product. In case of mechanical damage no warranties are provided.
- Do not use in the presence of visual damage. Do not use when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures (-30°C – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
- Do not put into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
- Double cable hook – Allows to fix the cable to the car holder
Specification
- Material: plastic IMPORTER: Defender Technology OU, Betooni str 11, 11415, Tallinn, Estonia.
Manufacturer: China Electronics Shenzhen Company. Address: 35/F, Block A, Electronics Science & Technology Building, Shennan Zhonglu, Shenzhen, China. Service life is 2 years. Date of manufacture: see on the package.
Manufacturer keeps the right to change package contents and specifications indicated in this manual.
The latest and detailed operation manual is available at www.defender- global.com Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>