KOAMTAC KDC470 KDC SmartSled Barcode Scanner User Manual

October 30, 2023
KOAMTAC

KOAMTAC logo KDC SmartSled Hand Strap
Assembly ManualKOAMTAC KDC470 KDC SmartSled Barcode
Scanner

KDC470 KDC SmartSled Barcode Scanner

  • For KDC470/475/480/485 SmartSled Scanners.

What’s in the Box?

  • 1 x Hand Strap Adaptor
  • 1 x Hand Strap Module
  • 1 x Hand Strap
  • 4 x screws + 1 extra

KOAMTAC KDC470 KDC SmartSled Barcode Scanner - in the
Box*SmartSled sold separately.
Tweezers and PH0 screwdriver (not included)

Hand Strap Module Assembly Instructions

  1. Using tweezers, carefully remove all four (4) screw caps from the back of the SmartSled. (A)
  2. Remove all four (4) screws from the back of the SmartSled. (B)
  3. Remove the cover plate from the back of the SmartSled. (C)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - cover plate
  4. Align screw holes of Hand Strap Adaptor with screw holes of the SmartSled. Use four (4) included screws to attach Hand Strap Adaptor to SmartSled. (D)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Hand Strap Adaptor
  5. Align notch in top of Hand Strap Module with top notch of the Hand Strap Adaptor. (E)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Strap Adaptor
  6. Slide the Hand Strap Module up until it clicks. (F)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Module up until

Attaching the Hand Strap

  1. Place the metal ring on the Hand Strap into the groove at the bottom of the Hand Strap Module. Pull down until it clicks. (G)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Hand Strap*Hook-and-loop fastener side up
  2. Align the top notch of the Hand Strap Module with the top notch of the Hand Strap Adaptor. Push the Hand Strap Module upwards until it clicks. (H)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Hand Strap Module
  3. Lift bottom of hand strap to top and slide the hand strap through the loop at the top of the Adaptor.
    connect the hook-and-loop fasteners to form a connected hand strap. (I)KOAMTAC KDC470 KDC SmartSled Barcode Scanner - connected hand
strap

Removing Hand Strap Module

Disconnect the hook-and-loop fastener. Squeeze tabs on both sides of the Hand Strap Adaptor and slide the Hand Strap Module down. Pull the Hand Strap Module away from the Hand Strap Adaptor and the SmartSled. (J)
KOAMTAC KDC470 KDC SmartSled Barcode Scanner - Adaptor and the
SmartSled

Additional KDC SmartSled Accessories:

  • 1-Slot Charging Cradle
  • 4-Slot Charging Cradle
  • HF Companion
  • 0.5W UHF Companion
  • 1.0W UHF Companion
  • Pistol Grip
  • Extended Battery

Visit our website for more information.KOAMTAC logo116 Village Blvd, Ste 305, Princeton, NJ 08540
p +1 609-256-4700
f 1+1 609-228-4373
info@koamtac.com
www.koamtac.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals