HERO S322126 Euro Lite Seat Walker User Manual
- July 12, 2024
- Hero
Table of Contents
HERO S322126 Euro Lite Seat Walker
No part of this user manual may be copied, distributed, reproduced, duplicated, scanned, or stored whether in whole or part in any form or by any means without the expressed written consent from the officers of Independent Living Specialists Pty Ltd. Independent Living Specialists does not accept responsibility for any changes, errors or omissions. All information is subject to change without prior notice and products may vary from that of the actual images depicted.
Introduction
- S322126 Seat Walker – Euro Lite Aluminium Low Hero Medical 130kg SWL
- S310066 Seat Walker – Euro Lite Aluminium Standard Hero Medical 130kg SWL
- S310834 Seat Walker – Euro Lite Aluminium Tall Hero Medical 130kg SWL
- S322125 Seat Walker – Euro Lite Carbon Fibre (5kg Frame Weight) Low Hero Medical 130kg SWL
- S310067 Seat Walker – Euro Lite Carbon Fibre (5kg Frame Weight) Standard Hero Medical 130kg
- SWL S310835 Seat Walker – Euro Lite Carbon Fibre (5kg Frame Weight) Tall Hero Medical 130kg SWL
Safety & Precautions
Weight Capacity
The maximum safety weight limit for the seated walker is 130kg and must not be
exceeded. If the maximum safety weight limit is exceeded, this can increase
the risk of damage to the seat walker and/or risk of serious injury to the
user and others.
User Safety
To ensure user safety, it is highly recommended that the below safety checks
are completed before each use of the seat walker:
- Brakes are functional
- Castors do not show signs of wear and tear
- The backrest, seat, hand grip, storage bag, and other removable parts are properly attached to the seat walker
Note: Failure to complete the above safety checks may result in seat walker malfunction and has the potential to cause injury to the user and others.
Exposure to Weather
Avoid exposure to hot or cold temperatures for extended periods, as it can
cause parts of the seated walker to become very hot or cold. This can result
in an increased risk of damage to the seat walker and/or risk of injury to the
user and others.
Uneven Terrain
Operating the seat walker on uneven terrain increases the risk of the seat
walker tipping over. Only operate on even and solid surfaces.
Intended Use
The seat walker is designed to be used as a walking aid. Before sitting on the
seat walker, please apply brakes and ensure it is on even ground.
Features
- Lightweight
- Storage bag with carry handles
- Ergonomic, height-adjustable handles
- Folds easily for transportation and compact storage Large front castors for easy maneuvering and stability
Specifications
Name
| ****
Aluminium Low
| Carbon Fibre Low| ****
Aluminium Standard
| Carbon Fibre Standard| ****
Aluminium Tall
| ****
Carbon Fibre Tall
---|---|---|---|---|---|---
SKU| S322126| S322125| S310066| S310067| S310834| S310835
Frame material| Aluminium| Carbon Fibre| Aluminium| Carbon Fibre| Aluminium|
Carbon Fibre
Size| Low| Low| Standard| Standard| Tall| Tall
Frame weight| 6.4kg| 5.2kg| 6.6kg| 5.3kg| 6.8kg| 5.4kg
Gross weight| 7.8kg| 6.6kg| 8kg| 6.7kg| 8.2kg| 6.8kg
Seat height (seat to floor)| 50cm| 50cm| 57cm| 57cm| 63cm| 63cm
Overall height (floor to handles)| 73-84cm| 73-84cm| 73-90cm| 73-90cm|
77-96cm| 77-96cm
Seat width| 45cm| 45cm| 45cm| 45cm| 45cm| 45cm
Outer width (including rear castors)| 59cm| 60.5cm| 59cm| 60.5cm| 59cm| 60.5cm
Front castor size| 9”| 9”| 9”| 9”| 9”| 9”
Rear castor size| 9”| 9”| 9”| 9”| 9”| 9”
Safe work load (SWL)| 130kg| 130kg| 130kg| 130kg| 130kg| 130kg
Instructions for Use
Unfolding the Seat Walker
- Unclip the safety clip located above the storage bag.
- Pull the handles apart until the frame is half open.
- Place hands flat on the top of the seat and push downwards to fully unfold the seat walker.
Adjusting the Handle Height
- Pull the white clip to unlock the handle.
- Pull or push the handles to reach the desired height.
Attaching and Removing the Storage Bag
- Push the clips of the storage bag onto the pole located at the front end of the seat.
- Pull the clips to remove the storage bag.
Using the Brakes
The seat walker features handbrakes with an integrated locking function to provide optimal control and safety for the user.
- To apply the brakes when in motion, pull the handbrake lever towards the handle and release it to disengage the brakes.
- To lock the brakes when the seat walker is parked, push the handbrake lever down until it locks. To release the brakes, pull the handbrake lever towards the handle.
- To adjust the tension of the brakes, tighten or loosen the tension adjustment nut (located at the end of the brake cable above the rear wheels). Adjusting the tension of the brakes ensures the safe operation of the brakes when in use.
Folding the Seat Walker
- Pull the strap located in the middle of the seat upwards to unlock the frame.
- Push both of the handles inwards to fully collapse the seat walker.
- Clip the black safety clip onto the seat frame to lock the folded seat walker in place.
Labelling Information
Product Label
The seat walker has a product label on the frame, located above the rear right
castor. The product label includes the following information:
- Name and address of the company
- Name and code for the product
- Safe Working Load (SWL)
- Serial number of the product (which includes the date of manufacture and the batch serial number)
Usage Label
The seat walker has a usage label on the frame, located above the rear left
castor. The usage label includes the following information:
- Overall seat walker width is 59cm
- Suitable for outdoor and indoor use
- Safe Working Load of accessories bag is 5kg
- Overall seat walker width is 60.5cm
- Suitable for outdoor and indoor use
- Safe Working Load of accessories bag is 5kg
Product Care & Maintenance
- It is recommended that the seated walker is inspected every 3 months for signs of wear and tear of the castors, seat or backrest.
- If there are visible signs of wear and tear, please contact your authorized dealer for replacement parts.
- Please ensure the brakes are tested before each use.
- If exposed to water or moisture, promptly dry the seat walker to prevent corrosion of the frame.
- The seat walker should be wiped down regularly using warm water or a mild detergent.
- All replacement parts as well as after-sales support and repair services are available through Hero Medical dealers.
Recycle & Disposal
Please follow the local government rules in regards to proper recycling and disposal. It should always be done through an authorized agent or licensed place of disposal. Please review the list of seat walker parts and packaging materials to ensure they are recycled or disposed of correctly.
- Frame: tubular aluminum or carbon fiber frame
- Seat & Backrest: vinyl & nylon
- Castors and handgrips: polyurethane
- Packaging: cardboard box and plastic
Warranty
The Hero Medical Euro Lite seat walker comes with 12 12-month warranty from the date of purchase on structural integrity.
- During the warranty period, any parts that have become defective due to faulty workmanship or material will be repaired or replaced without charge by a Hero Medical dealer of where the product was purchased.
- The warranty excludes castors, components, and parts that are subject to reasonable wear and tear.
- The warranty excludes faults that have been identified as misuse or user error.
- Unauthorized changes or modifications will forfeit your warranty.
- If a defect or fault is discovered, the Hero Medical dealer where the seat walker was purchased should be contacted immediately.
Independent Living Specialists Unit 1, 12 Mars Road Lane Cove West NSW 2066 1300 008 267 | ilsau.com.au 2024 HERO MEDICAL. INDEPENDENT LIVING SPECIALISTS PDT023-0624
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>