OMCONNECT K12 Smart Keybox Security KeySafe User Manual

OMCONNECT K12 Smart Keybox Security KeySafe

What’s Included

Specification

• Model K12
• Unlock Mechanism Bluetooth, PIN Code, App
• Battery 4 x AAA Alkaline Battery(Not included in the package)
• Material Body Zinc Alloy, SUS304
• Jump Start USB-C

Features

Lock &Unlock

• Administrator Unlock
  Set a Master Administrator PIN for Unlocking, settings, operations etc. and only the administrator could change the administrator PIN code.

• Anti-peeping
  Add up to 10 digits before and after PIN code to intensify your PINs.

Mobile Control

• Bluetooth one-touch unlock
  With your Mobile you could unlock the KeyBox by tapping the ” ” on the App

• Mobile Administrator
  Set Administrator PIN Codes from your Mobile to unlock, add users, delete users, etc.

• User Unlock
  This KeyBox allows to add up to 100 user PIN codes for your family, friends and visitors.

• Offline Unlock
  You could generate offline code through mobile App, for scheduled access, parcel delivery, housekeeping, etc.

Battery

• Battery Life
  4 AAA batteries, the life cycle will be more than 12 months, please use good batteries.

• Low Consumption
  BLE broadcasting turns to sleep mode if no operations.

• Low Battery
  When the battery runs out of power, system will remind you to replace the batteries.

Emergency

• Jump Start
  When the power is down and use USB-C to jump start the lock and get it unlocked

• System Lockdown
  The lock will be lockdown for 5 minutes if continuously enter wrong PINs for 5 times.

Quick Start

Step 1 >Install Battery >. Remove the battery cover

1. Insert 4 x AAA batteries into the battery dock.

Step 2 >Download Mobile App

1.  Scan QR Code below and download the App and turn on your mobile Bluetooth

Step 3 >Add Device

1. Go to App Home page, click Add Device or click “+” on the upper right.

2.  Press the “Reset” button and hold it for 3 beeps to start pairing
   

3. You will see the detected device and click “Go to add”.

4. Connecting, you need to wait for few seconds to let it finish.

5. Device added

Step 4 >Change Admin Password-Initial Admin Password:123456

1. Press and hold for 3 beeps

2. Right after the 3 beeps please key in:
   Initial Admin Password + + new admin password+ +new admin password+

Mechanical Instructions

Password & Factory Mode:

1. Password Length
   Password must be 6 digits (no more no less)

2. Add User Password
   Click + 0 + until the blue light blinks

   Enter admin password +
   Enter new user password +
   Enter new user password again and press
   When the (Enter button) blinks in green, user password has been set.

3. Delete User Password
   Click + 2 + until the blue light blinks

   Enter admin password and do not press any other button
   Enter the user password you wish to delete and press
   When the (Enter button) blinks in green, the password has been deleted.

4. Delete All User Password
   Click + 00000 + until the blue light blinks

   Enter admin password and press
   When the (Enter button) blinks in green, all passwords have been deleted.

5. Virtual digits-Anti-Spy
   Add any digits before and after the correct password the KeyBox unlocks as always.

6. System Lockdown
   KeyBox will Lockdown for 5 minutes if entering wrong password continuously 5 times.

7. Reset Factory Mode
   Press and hold the reset button for 5 seconds and with a long beep.

Bluetooth broadcasting & re-connecting:

• Press and hold the reset button for 3 beeps, you will be able to pair the device.
• Bluetooth broadcasting will turn to sleep mode if no operations within 1 minute.
• Press any key to activate the Bluetooth, App&Device will get reconnected each other.

App Instructions

• You will see all devices and rooms on the home page.

• Tap the Device to start operating.

• Tap “Me” at the bottom to manage your home.

• Touch the lock sign to unlock and lock.

• Tap “Bell” sign to check the alarm records.

• Tap “Member Management to add or delete members.

• Tap “opening record” to check opening logs.

• Tap “Intelligent Linkage” to turn on and off go home mode.

• Tap “Set” to manage passwords

• Tap “Get dynamic code” to get a code.

• Tap “copy code” and send it to friend or family.

• Tap “Pen” sign to edit your personal information.

• Go to “Members” to add family or other members

• Tap “+” to add family member or other members

• Tap “ Add it now” under Family to add family members.

• Owner need to complete the Home information before adding any family member if required

• The member need to be registered to the App before adding as a family member

• Fill up member information and set the role of the member

• Tap “Save” to complete and the member will be able to operate the device on his App

• Go to “Opening Logs” to check the unlocking history

• With this feture you will be able to find out when and who unlocked the KeyBox

• Go to “Intelligent Linkage” to set more smart functions

• Tap the green bar to turn on “Family go home”function.

• Tap the orange bar to turn on “Door lock alarm”function

• You will get notification if user unlocked with Bluetooth

• Go to “me” homepage and got to message center to check the records.

• Tap “Member” to add or remove codes.

• Tap “Temporary Code” to manage online and offline codes.

• set an online one time code.

• Tap “periodic Code” under Online Code to set a online code which will be available in a period of time.

• one time offline code which will be a 10 digits code and use it when the device is offline. one time offline code which will be a 10 digits code and use it when the device is offline.

• Tap “Offline Temporary Code” under Offline Code t generate an offline code (10 digits) which will be available in a period of time, and use when the device is offline or Bluetooth disconnected with device.

• Please note if the code less than 10 digits you need to regenerate a new code, the code must be 10 digits.

References

• OMCONNECT

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>