Sharp SPC079 Digital Alarm Clock User Manual

Sharp SPC079 Digital Alarm Clock User Manual

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.

Controls

1. Set Button
2. Alarm Set Button
3. Snooze Button
4. – Decrease Value
5. + Incease Value
6. Alarm Indicator
7. Alarm ON/OFF Switch
8. Time Zone Switch
9. DST Switch
10. Battery Compartment
11. Dimmer High/Low Switch

Getting Started

• Open the battery compartment and slide the DST Switch ON.
• Slide the Time Zone Switch to your Time Zone: PST, MST, CST, EST
• Plug into an approved electric outlet (120V AC/60Hz)
• The unit will then automatically display the correct time.
• Install two AA batteries (not included) to power the Battery Backup function. In the event of a power outage the Battery Backup will take effect and the alarm will continue to work; the time will not display until the power returns.

Manually Change The Time/Year/Month/Day/DST/Time Zone

• To set the clock press and hold the Set Button for 2 seconds to enter Setting Mode.
• The Setting Mode flow is: Hour > Minute > Year > Month > Day
• By pressing the + or – Buttons you can adjust the value for the Time & Date.
• Press the Set Button after each desired setting will confirm and jump to the next setting within the above setting flow.
• After you have confirmed all of the above press the Set Button once more to save and ext Setting Mode or let it exit automatically 10 seconds later without pressing any button.

Setting The Alarm

• Press Alarm Set Button one time to enter alarm setting mode, Alarm Indicator (bell icon) will start blinking.
• Press and hold the Alarm Set Button for 2 seconds, HOUR digital will blink
• Pressing the + or – Buttons to adjust the HOUR, press the Alarm Set Button to confirm, MINUTE digits will blink.
• Pressing the + or – Buttons to adjust the MINUTES, press the Alarm Set Button to save and exit or let it exit automatically 10 seconds later without pressing any button.

Alarm & Snooze Function

• Set Alarm as described in above section.
• To activate the alarm, slide the Alarm ON/OFF switch to ON.
• When the alarm sounds, press the SNOOZE Button to pause the alarm for 5 minutes, the Zz icon will blink. The alarm will repeat every 5 minutes.

NOTE : If the alarm sounds for 60 minutes continuously, it will automatically turn off.

Dimmer Function

Slide the Dimmer Switch to adjust the brightness of the backlight.

Battery Warning

• Clean the battery contacts and also those of the device prior to battery installation.
• Follow the polarity (+) & (-) to place battery.
• Don’t mix old and new batteries.
• Don’t mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel-Cadmium) batteries.
• Incorrect battery placement will damage the clock movement and battery may leak.
• Exhausted battery is to be removed from the product.
• Remove batteries from equipment which is not to be used for an extended period of time.
• Don’t dispose of batteries in fire. Batteries may explode or leak.

Lithium Battery Safety Instructions

Keep Button-cell battery away from children. Swallowing a button-cell battery can be fatal. Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Recycle lithium batteries. Do not dispose of in the trash. If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Follow the manufacturer’s instructions for charging the product and do not charge longer than recommended.

FCC Information

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Digital Alarm Clock

This lightning flashes and appears as withing sign alerting you of “dangerous voltage” inside the product.

CAUTION

• RISK OF ELECTRIC SHOCK DO NOT OPEN
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Please read this before operating your unit.

Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip – over.
13. Unplug the apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Please keep the unit in a good ventilation environment.
16. CAUTION : These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

WARNING:

• The mains plug is used as disconnect device, the disconnect device shall remain readily operable. This equipment is a Class Il or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.
• All above markings were located on the external enclosure of the apparatus, except for label of Date Code was pasted inside the battery compartment. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on the apparatus.

Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING : The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Download PDF:Sharp SPC079 Digital Alarm Clock User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>