HOFFMAN A60CPX4812LPFTC Floorstand Disconnect 2DR Owner’s Manual
- July 11, 2024
- Hoffman
Table of Contents
HOFFMAN A60CPX4812LPFTC Floorstand Disconnect 2DR
Specifications
- Article Number: 20659
- Height (H): 60.13 in
- Width (W): 48.5 in
- Depth (D): 12.12 in
- Material: Mild Steel
- Finish: Powder Coated
- Exterior Color: Gray
- Interior Color: White
- Exterior Color Code: ANSI 61
- Thickness (T): 11 ga
- Panel Size (D x E): 56.00 x 44.00 in
- Conductive Panel: A60P48G
- Panel: A60P48
- Stiffener Position (S): None in
- Weight: 453 lb
FAQ
Q: Can the floor stand disconnect be used outdoors?
A: This disconnect is designed for indoor use only as per its Type 12 rating.
Outdoor use may lead to damage and void the warranty.
FLOORSTAND DISCONNECT 2DR WHT INSIDE TYPE 12, 60.12X48.50X12.12, GRAY, STEEL
CATALOG NUMBER
A60CPX4812LPFTC
A disconnect can be installed on the centerpost or right side of this enclosure. Floor stands provide additional height and access for cleaning under the enclosure.
INDUSTRY STANDARDS
- UL 508A Listed; Type 12; File No. E61997
- cUL Listed per CSA C22.2 No. 94; Type 12; File No. E61997
- NEMA/EEMAC Type 12
- CSA File No. 42186: Type 12
- IEC 60529, IP55
FEATURES
PRODUCT ATTRIBUTES
ADDITIONAL PRODUCT DETAILS
Purchase panels separately.
All 24.12-in. (613-mm) and deeper enclosures using short connecting rods in
the following models require a HOFFMAN platform assembly, catalog number
ADSCLPA, purchased separately. • ABB Controls flange-operated devices • Eaton
Cutler-Hammer C361 devices • Eaton Cutler-Hammer C371 mechanisms which use
C371E, F, G, K operating mechanism (see footnote below) • General Electric
Type TDA devices (see footnote below) • Schneider Square D Class 9422 devices
(see footnote below)
The platform assembly can be omitted if long connecting rods are ordered in
place of short connecting rods. • For Eaton Cutler-Hammer operating mechanisms
C371E and C371F order catalog number C371CS1 connecting rod. For C371G and
C371K order catalog number C371CS2 connecting rod. • For General Electric
devices, order catalog number TDSR extended length drive rod • For Schneider
Square D devices, order catalog number 9422-R2 extra long operating rod(s).
Some devices require two rods.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>