nvent HOFFMAN DNS Side Door Instruction Manual
- June 1, 2024
- nVent HOFFMAN
Table of Contents
nvent HOFFMAN DNS Side Door
Product Usage Instructions
Assembly Steps
- Identify components A, B, C, D, E, F, and H from the provided list.
- Use the specified torque (5-10 Nm) for tightening components A, B, D, E, and F.
- Refer to the provided picture for proper assembly alignment.
- Secure components C with screws of size 4.5x8mm.
- Use M6x16mm screws for component D and M6x12mm screws for component F.
FAQ
Frequently Asked Questions
- Q: What should I do if a component is missing from the standard enclosure kit?
- A: In case a component is missing, please contact our customer support for assistance in acquiring the necessary part.
- Q: Can I use a torque higher than 10 Nm for tightening?
- A: It is recommended to stay within the specified torque range (5-10 Nm) to avoid damaging the product.
Product Overview
DNS
Parts Descriptions
| H | A | B |
|---|---|---|
| 1800 | 550 | 625 |
| 2000 | 575 | 625 |
NOTE: Component “C” will be provided from standard enclosure kit.
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>