HOFFMAN MCS22088R5 Floor Standing Enclosures Instruction Manual
- June 2, 2024
- Hoffman
Table of Contents
HOFFMAN MCS22088R5 Floor Standing Enclosures
MOUNTING INSTRUCTIONS
WARNING : When mounting on or over a combustible surface, a floor plate
of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150
mm beyond the equipment on all sides must be installed.
WARNING : In order to maintain the environmental integrity of the
enclosure, devices with the same environmental ratings shall be used to close
openings in customized enclosure.
MCS
MKS
MKD
COMBINABLE ENCLOSURE
MOUNTING THE LIFT HANDLE
MOUNTING LSEL
- – Used on enclosures 800mm deep and above.
** – Torque value for first tightening. For following tightening, torque value recommended is 4-5 Nm.
MCS BACK PANEL
MOUNTING BOTTOM PLATES
SEALING BOTTOM PLATES
SPM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>