nevent HOFFMAN DS-H89263 Mild Steel Double Door Enclosure Instruction Manual

: June 1, 2024
: nevent HOFFMAN

Table of Contents

nevent HOFFMAN DS-H89263 Mild Steel Double Door Enclosure
CONNECT AND PROTECT
WITH MOUNTING PLATE
Product Specifications
Frequently Asked Questions (FAQ)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nevent HOFFMAN DS-H89263 Mild Steel Double Door Enclosure

CONNECT AND PROTECT

The mild steel double-door wall-mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors’ loading capacity also increases as it is divided over two doors. With an IP 55 protection degree, components inside the enclosure are well protected making it well-suited for many different applications.

MATERIAL:
Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2mm galvanized steel / 2.5 mm MAD1001030R5 and above.

BODY
Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions, to allow air circulation around the rear part of the enclosure.

DOOR
Surface mounted with 130° opening. Concealed removable hinges with a captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right-hand door and two on the left-hand door. Sealing is ensured by an injected one-piece polyurethane gasket.

LOCK
Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three-point locking. Other inserts are available as an accessory.

MOUNTING PLATE
The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom, there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

GLAND PLATE OPENING
Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.

PROTECTION:
IP 55 | TYPE 12 | IK 10. The corrosion resistance must be taken into consideration.

FINISH
RAL 7035 structured powder coating.

DELIVERY
Enclosure with doors, and two door mounting profiles on each door. Gland plate(s) with gaskets), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities. nvent-HOFFMAN-DS-H89263-Mild-Steel-Double-
Door-Enclosure-fig-1

WITH MOUNTING PLATE

Enclosure dimensions| Mounting plate dimensions| Usable depth

d

| Gland plate|
---|---|---|---|---
H| W| D| h| w| Size| Type| Openings| N° of locks| Item no.
600| 800| 300| 570| 750| 282| 310 × 96| 2| 2| 1| MAD0608030R5
800| 1000| 210| 770| 950| 192| 410 x 96| 3| 2| 1| MAD0801021R5
800| 1000| 300| 770| 950| 282| 410 x 96| 3| 2| 1| MAD0801030R5
800| 1200| 300| 770| 1150| 282| 510 × 96| 4| 2| 1| MAD0801230R5
1000| 1000| 300| 970| 950| 282| 410 × 96| 3| 2| 1| MAD1001030R5
1200| 1000| 300| 1170| 950| 282| 410 × 96| 3| 2| 1| MAD1201030R5
1200| 1000| 400| 1170| 950| 382| 410 x 96| 3| 2| 1| MAD1201040R5
1200| 1200| 300| 1170| 1150| 282| 510 × 96| 4| 2| 1| MAD1201230R5
1200| 1200| 400| 1170| 1150| 382| 510 x 96| 4| 2| 1| MAD1201240R5
1400| 1000| 300| 1370| 950| 282| 410 × 96| 3| 2| 1| MAD1401030R5
1400| 1000| 400| 1370| 950| 382| 410 x 96| 3| 2| 1*| MAD1401040R5

3 point espagnolette locking.

2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. HOFFMAN-DS-H89263-MADIECNA-EN-2304

Product Specifications

Product Name : MAD-IEC_NA
Material : Mild steel
Enclosure Type : Double door
IP Rating : IP 66
Environmental Rating : TYPE 4, 12
Impact Protection : IK 10
Finish : RAL 7035 structured powder coating

Frequently Asked Questions (FAQ)

Q: What is the material used for the body of the enclosure?
A: The body of the enclosure is made of 1.5 mm mild steel.

Q: How can I adjust the mounting plate position?
A: You can adjust the mounting plate position to any depth by using the AMG accessory.

Q: What is included in the delivery package?
A: The delivery package includes the enclosure with doors, two door mounting profiles on each door, gland plate(s) with gasket(s), a metallic double-bit 3 mm key, mounting accessories, and earthing facilities.

North America