nVent HOFFMAN CCFR20 Cable Entry Gland Plate Round Modular Instruction Manual
- June 1, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN CCFR20 Cable Entry Gland Plate Round Modular
Specifications
- Product Name: Cable Entry Gland Plate Round Modular, CCFR
- Available Sizes: CCFR20, CCFR25, CCFR32, CCFR40, CCFR50, CCFR63
- Frame Only Catalog Numbers: CCFR2032, CCFR2032, CCFR2032, CCFR4063, CCFR4063, CCFR4063
- Locking Adapter Only Catalog Numbers: CCFRM20A, CCFRM25A,CCFRM32A, CCFRM40A, CCFRM50A, CCFRM63A
Product Usage Instructions
Guide cables through the frame
Ensure the cables are correctly aligned and pass them through the designated
entry points on the frame.
Click inlay into position
Secure the inlay into its designated position within the frame to hold the
cables in place.
Attach seals to cables
Connect the appropriate seals to the cables to ensure a secure and
weatherproof fit.
Cable Entry Systems
Cable Entry Gland Plate Round Modular, CCFR
Cutout Dimensions
Catalog Number (Kit)| Frame Only| Locking Adapter Only|
Counter Nut Only| Cutout D| Torque
---|---|---|---|---|---
CCFR20| CCFR2032| CCFRM20A| CCFRM20NUT| 20.3mm (.80)| 3 Nm (26 in-lb)
CCFR25| CCFR2032| CCFRM25A| CCFRM25NUT| 25.3mm (1.0)| 3 Nm (26 in-lb)
CCFR32| CCFR2032| CCFRM32A| CCFRM32NUT| 32.3mm (1.27)| 3 Nm (26 in-lb)
CCFR40| CCFR4063| CCFRM40A| CCFRM40NUT| 40.4mm (1.59)| 7 Nm (62 in-lb)
CCFR50| CCFR4063| CCFRM50A| CCFRM50NUT| 50.4mm (1.98)| 7 Nm (62 in-lb)
CCFR63| CCFR4063| CCFRM63A| CCFRM63NUT| 63.4mm (2.50)| 7 Nm (62 in-lb)
Combination Options
DIVIDER
Catalog Number (Kit)| 1| 2| 4
CCFR20| —| —| —
CCFR25| —| —| —
CCFR32| —| —| —
CCFR40| CCFD1| CCFD2| CCFD4
CCFR50| CCFD1| CCFD2| CCFD4
CCFR63| CCFD1| CCFD2| CCFD4
-
Guide cables through frame.
-
Click inlay into position.
-
Attach seals to cables.
-
Push seals all the way in.
-
Assemble locking adapter.
-
Screw locking adapter into outer frame.
-
Mount from outside.
-
Assemble counter nut.
-
Screw counter nut on from inside.
According to UL Standard 508A, the following Conditions of Acceptability apply:
- Use M5 screws of stainless steel (AISI type 304 or 316)
- Max. end-use temperature for UL application is 50° C (52° F)
- Max. temperature range: -40°C to 120° C (-40° to 248° F) static
PH 763 422 2211 • nVent.com/HOFFMAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>