Drmpry L1 Open Ear Bluetooth Headphone

ARSALAN POST COMPLETE

Product Features

How To Connect

Notes:

1. Turn on Bluetooth on your phone
2. Ensure that your phone/computer or other devices are not connected to other audio devices and that the earphones are not connected to other devices.
3. Ensure the earphones’ status lights are flashing and have sufficient battery.
4.  Placing both earphones back into the charging case and reopening it can solve 90% of pairing problems.

First-time Connection

1. Open the charging case. This will power on the earphones and activate pairing mode automatically. Take the earphones out of the charging case to begin using them.
   

2. Wear earphones.
   

3. Turn on Bluetooth on your phone. Find the name “Ll-OPEN” on the Bluetooth device list. Select to initiate active pairing.

4. When you hear the voice prompt “Connected,” it means the connection is successful.

Note:

If the earphones have been connected to your device before, they will automatically reconnect when you use them again with the Bluetooth setting turned on. This saves time and hassle of having to manually connect the earphones each time you use them.

Specifications

What’s In The Box?

1. Open-Ear Headphones x 2
2. Charging Case x 1
3. USB-C Charging Cable x 1
4. Product Carrying Bag x 1
5. Quick Guide x 1
6. User Manual x 1

automatically enter pairing mode. The earphones are waiting for the device to pair.
Paired successfully (with phone)| | Connected
Switching Bluetooth pairing devices| Disconnect the original connected device Open the charging case cover, and the earphones will automatically enter pairing mode to pair with the new device again.| Connected
Disconnect| The earphones go beyond the Bluetooth range and are disconnected. Enter the reconnection mode (automatically reconnect when entering Bluetooth range). If not preconnected within 10 minutes, te earphones will automatically power off.| Disconnected
Disconnect| Manually turn off the Bluetooth device, enter search pairing mode, enable device Bluetooth automatic reconnection (enable phone reconnection, it needs to be done with the phone’s built-in reconnection, and the earphones will not initiate reconnection). If not paired successfully within 10 minutes, the earphones will automatically power off| Disconnected
Automatic reconnection| Within 5 seconds of powering on, the earphones automatically enter the reconnection mode. When entering the reconnection mode, the pairing status can be detected. If the reconnection fails within 10 seconds, the Bluetooth device will no longer be reconnected.| Pairing
Connected
Failed to reconnect| If the reconnection fails, immediately enter search pairing mode 10 minutes of unsuccessful Bluetooth pairing, automatic (synchronized) shutdown Automatic: Automatically|
Shutdown| Automatic: Automatically shut down when placed in the charging case (left and right earphones will not power off synchronously).|
Activate Siri| Release the activation touch button after 5 clicks on the left and right ear buttons.| “Dong”
CloseSiri| Press the left and right earphone touch button 5 times and release to close Siri| “Dong”
Clear phone Bluetooth pairing records| Continuous fast 8 clicks on left/right earphones.| “Dong”
Switching between primary and secondary headphones| When the left and right earphones are paired, the right ear is the main ear (the right ear LED indicates Pairing/right ear MIC pickup). Insert/remove any earphone, and the other earphone will not disconnect the phone link| “Dong”
DUTmode| Press the multifunction key 6 times in a row while turning on the device| “Dong”
Play/Pause| Double click the left or right earphone touch button.| “Dong”
Previous Track| Three clicks on the left earphone touch button.| “Dong”
Next Track| Three clicks on the right earphone touch button.| “Dong”
Increase volume| Long press the right earphone touch button.| “Dong”
Reduce volume| Long press the left earphone touch button.| “Dong”
Switching between primary and secondary headphones| When the left and right earphones are paired, the right ear is the main ear (the right ear LED indicates Pairing/right ear MIC pickup). Insert/remove any earphone, and the other earphone will not disconnect the phone link| “Dong”
Incoming call| The iOS system comes with a bullring prompt tone, and the Android system specifies a call prompt tone for customers
Answer phone calls| Click on the left or right earphone touch button.| “Dong”
Call rejection| Long press the left or right earphone touch button for 2 seconds.| “Dong”
Hang up call| Double click the left or right earphone touch button.| “Dong”
Keep the first call and connect the second call| Double click the left or right earphone touch button| “Dong”
Swap calls| Long press the touch button on the left or right earphones for 2 seconds and release the prompt sound “dong”.| “Dong”
Hang up the current call and connect to another call| Click on the left or right earphone touch but ton.| “Dong”
Reject second call| Long press the touch button on the left or right earphones for 2 seconds and release the prompt sound “dong” .| “Dong”

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed  and operated with minimum distance 0mm between the radiator & your body.

CONTACT US

1. Email: service@drmpry.com
2. By scanning the QR code below, you can enjoy the following VIP benefits:
   • a. Extend the warranty period to 2 years
   • b. Promotional activities and VIP discounts
   • c. View Product Deals
   • d. Get Drapery’s latest product offerings

Customer Support

Hello, Our Valued Customer,
Thank you for choosing Drmpry. We are honored to be a part of your audio experience and look forward to serving you for many years to come.

As a token of our appreciation, we pledge to provide you “VIP” customer service throughout your journey with our product. Should you have any questions or concerns, please do not hesitate to reach out to our dedicated support team. If you encounter any of the issues listed below, we are here to help you immediately.

Such As

1. Unable to connect to the device.
2. The charging case’s battery does not last long enough.
3. Touch control malfunction/insensitivity.
4. The headphones don’t feel comfortable or secure when you wear them.
5. Other issues …

  CUSTOMER SUPPORT: service@drmpry.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>