KOHLER K-6355 Persuade Curv Two Piece Elongated Toilet With Skirted Trapway Dualflush User Guide
- June 9, 2024
- Kohler
Table of Contents
- KOHLER K-6355 Persuade Curv Two Piece Elongated Toilet With Skirted
- Features
- Technology
- Installation
- Recommended Products/Accessories
- Included Components
- Warranty
- Available Colors/Finishes
- Dimension
- Technical Information
- Contact Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KOHLER K-6355 Persuade Curv Two Piece Elongated Toilet With Skirted
Trapway Dualflush
Features
- Two-piece design
- Elongated bowl offers added room and comfort
- Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults
- Top-mount two-button flush offers a choice of 1.0 or 1.6 gallons per flush (GPF)
- Skirted trapway simplifies cleaning
- The combination consists of the K-4326 bowl and the K-3569 tank
- Patented ReadyLock® installation system, a simple solution for skirted toilets, saves time, and hassle, and eliminates the need to drill into the floor for standard 12″ (305 mm) rough-in
- Standard 12″ (305 mm) rough-in only. Cannot be combined with K-5383, or K-5381 for use in 10″ or 14″ installations
- 4-1/2″ (114 mm) x 5-3/4″ (146 mm) water area
Material
- Vitreous china
Technology
- Dual-flush technology allows you to choose between a full or partial flush
Installation
- Seat sold separately
- Standard 12″ (305 mm) rough-in
- Floor-mount/floor outlet
- Requires mounting plate 1362736 for heated seat installation
Water Conservation & Rebates
- Eligible for consumer rebates in some municipalities
- This product can help a building earn Water Efficiency points in LEED® Green Building Rating System
Recommended Products/Accessories
- K-4636 Cachet® Quiet-Close™ elongated toilet seat
- K-5588 Purefresh® Elongated toilet seat
- K-186 Dual Flush Actuator 1265114
Included Components
Product consists of:
- 4326
- 3569
Additional Components:
- Dual flush push buttons
- ReadyLock™ installation system
- Tank accessory pack
- Tank cover
Codes/Standards
- ASME A112.19.2/CSA B45.1
- ASME A112.19.14
- DOE – Energy Policy Act 1992
- EPA WaterSense®
- California Energy Commission (CEC)
Warranty
KOHLER® Toilets and Seats Limited Warranty
See the website for detailed warranty information.
www.kohler.com.
Available Colors/Finishes
Color tiles are intended for reference only.
Dimension
Technical Information
All product dimensions are nominal.
- Toilet type: Floor-mount
- Waste Outlet: Floor
- Bowl shape: Elongated
- Trap passageway: 2″ (51 mm)
Water Consumption
- Full: 1.6 gpf (6 lpf)
- Water surface size: 4-1/2″ x 5-3/4″ (114 mm x 146 mm)
- Rim to water surface: 8-1/2″ (216 mm)
- Rough-in: 12″ (305 mm)
- Seat-mounting holes: 5-1/2″ (140 mm)
Notes
Install this product according to the installation instructions.
The rough-in must be 12″ (305 mm) or more from the base of the wall or
baseboard. Install or relocate the supply and outlet as necessary to conform
to rough-in dimensions.
If this toilet is installed in new construction, install a new supply stop
following the dimensions in the diagram. In installations with the supply stop
installed, the existing supply stop may need to be relocated if it is less
than 8-1/2″ (216 mm) from the centerline of the toilet. Dry fit the toilet to
confirm if the supply stop needs to be relocated.
The supplied hose will extend roughly 6″ (152 mm) from the toilet. If the
supplied hose does not reach the supply stop, a longer supply hose may be
used.
For back-to-back toilet installations: Use only a 45° double wye fitting.
Contact Information
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications. For the most current Specification Sheet, go to
www.kohler.com.
2-26-2023 22:43 – US/CA/MX.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>