Apps POBOVi App User Guide
- July 10, 2024
- APPs
Table of Contents
Apps POBOVi App User Guide
Step 1: Activate the Ring
For first- time use , follow the ” Tips 1 ” and place the smart ring into the
charging case to charge . W hen the LED light flashes in a breathing pattern ,
the smart ring is successfully activated .
Step 2: Download the POBOVi App
Search and download “POBOVI Ring” App.
Step 3: Connect the Ring
-
Open the POBOVi A pp , register an account , and log in . C lick “Bind Ring .”
-
Scan for devices to find the Bluetooth name ” POBOVi Ring” and click to connect .
Certification
T his device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
- this device may not cause harmful interference .
- this device must accept any interference received , including interference that may cause undesired operation.
Tips 1: Ring Charging
Please manually rotate the ring within the charging case to ensure the red U-
shaped mark on the ring is near the LED indicator . T he LED light will flash
in a breathing pattern to indicate that the ring is charging . T he charging
icon will also appear in the app .
Tips 2: LED Indicator
Green: Charging case is in full battery
Blue: Charging case is in medium battery
Red: Charging case is in low battery
LED light flashes in a breathing pattern: Ring is charging
LED light steady on: Charging case is currently charging .
LED light off: Both the charging case and the ring are fully charged .
Tips 3: Wearing Ring
As shown in the figures , to ensure more accurate physiological information ,
please make sure the red U- shaped mark is on the back side of your finger
when wearing the ring .
Tips 4: If the smart ring experiences a functional anomaly, please perform a reset operation:
- Insert the USB- C cable into the charging case to charge it .
- Once the indicator light is steady on , place the smart ring into the charging position within 7 – 1 0 seconds to reset it .
- T he purple light will flash for one second , indicating that the ring has been successfully reset .
Customer Support: pobovisupport@szelu.cn
Note: This equipment has been tested and found to comply with the= limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. if this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures Reorient or relocate the
receiving antenna. – – Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/ TV technician for help.
Fcc Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 5 mm between the radiator and your body. This transmitter
must not be co- located or operating in conjunction with any other antenna or
transmitter.
FCC ID:2BF7DPG1 FCC 15.19a(3) statement This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>