tuya L1 WZ 0/1-10V ZigBee plus RF plus Push Dimmer Owner’s Manual
- July 10, 2024
- Tuya
Table of Contents
L1 WZ 0/1-10V ZigBee plus RF plus Push Dimmer
Owner’s Manual
0/1-10V ZigBee + RF + Push Dimmer
- ZigBee + RF + AC push 0/1-10V dimmer, 1 channel output.
- Output 1 channel 0/1-10V signal, connect with 0/1-10V dimmable driver.
- Tuya smart APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene function.
- Philips HUE APP control by connect with Philips HUE bridge.
- Voice control, support for Amazon Alexa, Google Assistant, Tmall Genieand Xiaodu voice assistant.
- 0-10V or 1-10V output selectable by DIP switch.
- 256 levels 0-100% dimming smoothly without any flash.
- Compatibility with RF 2.4G single zone or multiple zone dimming remote control.
- Each L1(WZ) controller can also work as ZigBee-RF converter, then use Tuya smart APP to control one or more RF dimming LED controller or driver synchronously.
- Connect with external push switch to achieve on/off and 0-100% dimming function.
- Light on/off fade time 3s selectable.
- Easy to be placed in standard wall junction box behind a push switch.
Technical Parameters
Input and Output
Input voltage| AC100-240V
Output signal| 0/1-10V (20mA)
Dimming data
Input signal| 30m(Barrier-free space)
RF control distance| 256 levels
Dimming level| 0 -100%
Dimming range| ZigBee + RF + Push Dim
Environment
Operation temperature| Ta: -30 ºC ~ +55ºC
Case temperature (Max.)| Tc: +65ºC
IP rating| IP20
Package
Size| L60 x W60 x H40mm
Gross weight| 0.060kg
Safety and EMC
EMC standard(EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard| EN 61348-1:2015+A1:2021
EN 61348-2-13:2014+A1:2017
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE, EMC, RED
Warranty
Warranty| 5 years
Mechanical Structures and Installations
System Wiring
Note:
- The above distance is measured in spacious (no obstacle) environment, please refer to the actual test distance before installation.
- Users must use the Tuya ZigBee gateway to realize remote control and voice control.
Wiring Diagram
Note:
- We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces, The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
- Switch off the power, then switch on power, repeat again.
Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s.
Tuya Smart APP Network Connection and Operation
Press and hold Match/Set key for 2s, reset ZigBee network.
Press and hold Match/Set key for 5s, or push twice Match/Set key fastly, Clear
previous network connection, enter config mode the blue LED indicator fast
flash.
Repeat power on and off for 5 consecutive times, also clear previous network
connection, enter config mode.
If Tuya smart APP network connection succeed, the blue LED indicator will stop
flash, and in Tuya smart APP, you can find ZB-DIM device.
Tuya smart APP interface operation:
Touch brightness slide to adjust brightness. 0-10V or 1-10V Dimming
Setting
Select 0-10V dimmer or 1-10V dimmer according to dimmable LED driver.
L1(WZ) Match RF Remote Control (Optional)
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use the L1(WZ)’s Match key
Match:
Short press match key of L1(WZ), immediately press on/off key (single zone
remote)or zone key (multiple zone remote) on the remote.
Delete:
Press and hold match key of L1(WZ) for 10s to delete all match, The light
blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power of L1(WZ), then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power of L1(WZ), then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
L1(WZ) Work as ZigBee-RF Converter to Match other RF Dimming LED Controller or
driver
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use the controller’s Match key
Match:
Short press match key of the controller,
immediately press on/off key on the Tuya smart APP.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key of the controller for 5s,The LED indicator fast flash
a few times means match was deleted.
Use Power Restart
Match:
Switch off the power of the controller, then switch on power,repeat again.
Immediately short press on/off key 3 times on the Tuya smart APP.
The light blinks 3 times means match is successful.
Delete:
Switch off the power of the controller, then switch on power, repeat again.
Immediately short press on/off key 5 times on the Tuya smart APP.
The light blinks 5 times means match was deleted.
2024.06
User Manual Ver 1.0.6