imin Lark 1 Mobile Computer User Manual

imin Lark 1 Mobile Computer

Product Usage Instructions

Receiver
The receiver includes the Scan Code Button, Volume Button, Power Button, and Speaker. Press the Scan Code Button to initiate scanning.

Scanner
The scanner features a Charging Indicator Lamp, Camera, Function Button, and NFC technology. Use the Camera for scanning purposes and NFC for wireless communication.

Charging
To charge the device, connect the Pogo Pin to the charging port. Ensure proper alignment for charging efficiency.

Safety Information
Handle the product with care to prevent damage to the battery. Dispose of used batteries according to local regulations. Do not dispose of batteries in a fire.

FAQ

• Q: How do I charge the device?
  A: Connect the Pogo Pin to the Type-C Interface for charging.

• Q: What should I do with a used battery?
  A: Dispose of used batteries according to local environmental laws and guidelines. Do not dispose of batteries in fire.

Introduction

Technical Specifications

Safety Information

Safety and Handling

• Please plug in the power adapter to only its corresponding AC socket.
• Do not use it in an explosive gas atmosphere.
• Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorized service provider.
• This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices.
• About the battery replacement:
  1. Do not attempt to replace the battery yourself – you may damage the battery, which could cause overheating, fire and injury.
  2. The replaced/ used battery should be disposed of according to local environmental laws and guidelines. Do not dispose in f ire. It should be serviced or recycled by iMin or an authorized service provider and must be recycled or disposed of separately from household waste.

Company Statement
Our company is not responsible for the following actions:

• Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual.
• We will not be responsible for any damage or problem caused by third-party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products.
• The operating system of this product is supported by official regular OS updates. If the user breaches the third party’s ROM system or changes the system file by hacking, it may cause unstable, undesired system operation and bring security risk.

Advice

• Do not expose the device to moisture, dampness, or wet weather, such as rain, snow, or fog.
• Do not use the device in extremely cold or hot environments eg, near a fire or lit cigarette.
• Do not topple, throw, or bend.
• Use in an optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
• Do not attempt to use the device near medical equipment.

Important Safety Information

• Do not install or use during thunderstorms and lightning conditions, otherwise, there will be a risk of electric shock, injury, or death in the event of thunder or lightning hit.
• If you find unusual odor, overheating, or smoke, please cut off the power immediately.
• Do not expose the device to moisture, dampness, or wet weather, such as rain, snow, or fog; Do not use it in an explosive gas atmosphere.

Disclaimer
Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as the current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) information:
This Mobile Data Terminal, Mobile Computer, Handheld data terminal, and Wireless Handheld Terminal meet the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of the USA (FCC) is 1.6 W/kg averaging over one gram of tissue. Device types: Mobile Data Terminal, Mobile Computer, Handheld Data Terminal, and Wireless Handheld Terminal have also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Mobile Data Terminal, Mobile Computer, Handheld Data Terminal, and Wireless Handheld Terminal kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0 mm separation distance between the user’s body and the back of the Mobile Data Terminal, Mobile Computer, Handheld Data Terminal, or Wireless Handheld Terminal. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Designed by iMin Singapore Address: 11 Bishan Street 21 #03-05 Singapore 573943
TEL: +65 67413019
FAX: +65 67413989
URL: www.imin.sg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>