imin I22T01 Falcon 1 Smart POS Device User Manual

imin I22T01 Falcon 1 Smart POS Device User Manual

Jayco reviews: DO NOT BUY JAYCO | P...

Jayco reviews: DO NOT BUY JAYCO | PissedConsumer

Safety Information

Safety and Handling

• Please plug-in power adapter to only its corresponding AC
• Do not use in explosive gas
• Do not disassemble the It should be serviced or recycled only by iMin or an authorised service provider.
• This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic
• About the battery replacement:

1. Do not attempt to replace the battery yourself – you may damage the battery, which could cause overheating, fire and
2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household

Company Statement

Our company is not responsible for the following actions:
Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specif ied in this instruction manual.
We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us).
Without our consent, you have no right to modify or alter the products.
The operating system of this product is supported by off icial regular OS update. If the user breached the third party’s
ROM system or change the system f ile by hacking, it may cause unstable, undesired system operation and bring security risk.

Advices

Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog.
Do not use the device in extreme cold or hot environments eg, near a f ire or lit cigarette.
Do not topple, throw, or bend.
Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
Do not at tempt to use the device near medical equipment.

Important Safety Information

• Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit.
• If you f ind unusual odour, overheating or smoke, please cut off the power immediately.
• Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.

Disclaimer

Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specif icat ion without prior not ice.
Operations in the 5GHz band are restricted to indoor usage only.

Introduction

Technical Specif icat ions

screen
Secondary LCD Display| 2.4 inches, resolution: 240 x 320
Storage| 2GB RAM (optional 4GB or 8GB) + 16GB ROM (optional 32GB or 64GB)
Camera| 0.3M, FF
Wi-Fi| Support 802.11a/b/g/n/ac (2.4G Hz / 5.0G Hz)
Bluetooth| 5.0BLE
Card Slot| 1 x SIM, 1 x PSAM
Network| 2G/3G/4G
NFC| Optional, default none
Printer| 80mm thermal printer, support the paper roll with maximum 80mm diameter
Speaker| 1.5W
External Interface| 1 x DC-in, 1 x RJ11, 1 x RJ12 (12-24V), 1 x RJ45, 2 x Type-A port, 2 x Card Slot
Power Adapter| Output power 60W, Input: AC100~240V, Output: DC24V/2.5A
Machine Size| 247.8 x 198.8 x 134.3mm
Operating Temperature| 0℃ to +50℃
Storage Temperature| -20℃ to +60℃
Operating Humidity| 10% to 90% r.H.
Limit Altitude| Max. 5000 meters

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>