imin K1-101 Kitchen Display System User Manual
- June 4, 2024
- imin
Table of Contents
imin K1-101 Kitchen Display System
Safety Information
Safety And Handling
- Please plug~n power adapter to onfy its corresponding AC socket
- Do not use in explosJve gas atmosphere.
- Do not disassemble the equipment It should be serviced or recvded only by iMin or an authorised service provider.
- This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices.
- About the battery replacement:
- Do not attempt to replace the Kitchen Display System battery yourself .. you may damage the battery, which could cause overheating, fire and injury.
- The replaced/ used battery should be disposed of according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by iMin or an authorised service provider, and must be recycled or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions:
- Damage caused by misuse, lack of care in maintaining the equipment. or placing the device under conditions that may cause undesired operation and risk as spe<:ified in this instruction manual.
- We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no fight to modify or alter the products.
- The operating system of this product is supported by official regular OS update. If the user breached the third party’s ROM ~tern or change the ~lem file by hacking, it may cause unstable, undesired system operation and bring security risk.
Advice
- Do not expose the device to moisture. dampness. or wet weather. such as rain, snow or fog.
- Do not use the device in extremely cold or hot environments eg, near a fire or lit cigarette.
- Do not topple, throw, or bend.
- Use in an optimally clean and dust-free environment to avoid tiny particles dogging and seeping through gaps in the device.
- Do not attempt to use the device near medical equipment.
Important Safety information
- Do not install or use during thunderstorms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit
- If you find unusual odour, overheating or smoke. please cut off the power immediately.
- Do not expose the device to moisture. dampness. or wet weather. such as rain, snow or fog~ Do not use in an explosive gas atmosphere.
Disclaimer
Due to regul ar updates and enhancements made to the product. some details of
this document may be inconsistent with the physical product. Please take the
product you received as current standard. The right to interpret this document
belongs to our company. We reserve the right to amend this specification
without prior notice.
Name And Content List Of Toxic And Harmful Substances In The Product
Part Name
| Toxic or harmful substances and elements
---|---
Plumbum (Pb)| Mercury
(Hg)
| Cadmium (Cd)| Chromium VII (Cr(VII})| Polybrominated biphenyl (Cr(VII)}|
Polybrominated diphenyl ethers (PBOE )
Circuit Board| X| 0| 0| 0| 0| 0
0: Means that the content of the toxic and harmful substances in al
homogeneous materials of the component is below the limit
specified in SJ/ 1113363-2006.
X: Means that the content of the toxic and hazardous substances at least in a
homogenous material of the component exceeds
the limit specified in SJ/· 2006; However, the components marked with “X- in
the above table are out of proportion because there is no mature alternative
technology in the industry at present.
Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance wi~ the electronic information products control and management measures or l ocal environmental laws and guidelines. They should not be discarded at will or with household waste.
Product Warranty Card
Product Name: Kitchen Display System
-
Model No.:
-
Serial No.:
-
Purchase Date:
Warranty Period: The warranty period commences on the date of purchase.
We offer 365 days warranty service. -
User Phone:
-
User Address:
iMin does not warrant against the folowing:
- Disassembled or repaired product by unauthorized service provider without our consent
- Damaged product barcode, fragile sticker and altered or defective warranty card.
- Damage caused by non-compliance with instn. actions in this user manual.
- Damage caused by exposure to sources of liquid, dripping or splashing, normal wear and tear, accident or abuse.
- Failure or damage as a resul t of any Force Majeure Event.
- Expired warranty period.
Packing Content
- Host Device
- 1. Power Adapter
- 1, Power Line
- 1!ti User Manual 1 (including warranty card, product qualification c.ertificatc)
Profile
Display Screen
Touchscreen, operate screen display interface.
ANTENA
For Antenna wireless internet signals enhancing.
Cable Cover
Can be connected to various cables after opening.
Keyhole
Open the machine with the key.
Basic Parameters
OS | Android 7.1 |
---|---|
CPU | RK3288W |
DisplayScreen | 21.5″ resolution: FHD 1920• 1080,10-points capacitive touch |
screen
Storage| 2GBRAM + 16GB ROM
WIFI| so2.11 a/b/g/n/ac
Bluetooth| B(uetooth 4.2
Speaker| 3W
External Port
| 4 • USBType-A, 1′ MkroUSB, 1′ DC jack, 1 • HDMI Port, 1 ‘RJ45,
1 ” RJ12 , 1 ” RJ11, l ” SD Soket, 1 • Earphone Jack Port
External StorageCard| MicroSD (TF) up to 128GB
Dimension| 52.2cm • 31.9cm • 4.2cm
Power Adapter| Output power 60W, Input: AC100- 240V/2.5A, Output:DC24V/ 2.SA
Operating Temperature| -1o·c – +4o·c
Storage Temperature| -10 -C – +S0’C
Humidity| Relative humidity < 85%,no condensation phenomenon
Altitude limit| Altitude below5000m
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reali ent or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radiollV technician for help.
Radiation Expo sure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>