iMin S1-701 120S01 Self Service Device User Manual

iMin S1-701 120S01 Self Service Device

Introduction

Camera Lens
Used for face payment.

Display
Provide touch screen for operator.

Printer
Used for receipt printing.

Scanner
Used for payment through 1D/2D code scanning.

Wi-Fi Antenna
Used for strengthen the wifi signal.

Cover Opening Hole
The machine is opened by a key so as to connect wires, etc.

Usage Description

• Interface Introduction

• Printer Introduction

Power LED
On: Normal Status
Off: Unstable Current

Error LED
Off: Normal Status
On for Long Period: Paper unavailable, Printer malfunction Blinking: Paper jam or blocking module is working

Receipt Paper setup

1. Open the cover clip on the panel to expose the key groove;
2. Insert the unlock key to rotate the printer tray; t) Insert the paper roll:
   • Properly insert 80mm wide thermal paper into the paper bin;
   • Close the paper bin door and lock the machine cover after pulling the paper out.

Installation Guidelines

Mount Bracket Installation

1. Fix the POS mount bracket with three M4 machine screws on the right side of device’s main body;
2. Install the POS terminal, fix the terminal back using two M3 machine screws, connect the wiring cables.

Cable Connection

Method (1): Connect the POS cable using separator; one-end connect to device’s main body, another end connect to the power supply.

Method (2): Connect the POS cable using separator and insert into column bracket’s opening; one-end connect to device’s main body, another end connect to the power supply.

Basic Parameters

Scanner

| 1-    dimensional code: UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN (Bookland EAN), ISSN, Code 39, Code 39 full ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5,

Industrial 2 of 5, Matrix 2 of 5, Codabar (NW7), Code 128, UCC/EAN 128, ISBT 128, Code 93, Code 11(USD-8), MSI/Plessey, UK/Plessey,

China Post, China Finance , GS1 DataBar (formerly RSS) variants

2-     dimensional code: PDF417, MicroPDF417, QRCode, DataMatrix, Han Xin Code, Aztec Code

Speaker| 3W
External Interface| 4 x USB Type-A , 1 x Micro USB, 1 x RJ4 5, 1 x RJ11 , 1 x DC-In
Exrternal Storage| MicroSD (TF) up to 128GB
Power Adapter| Output power 100W, Input: 220Vac; Output: 24Vdc 4.2A
POS Stand| Standard
Wall mount| Optional
Base stand| Optional
Machine Dimension| 348mm x 100mm x 807.3mm
Operating Temperature| -10°C to +40°C
Storage Temperature| -10°C to +S0°C
Humidity| Relative humidity 85%, no condensation phenomenon
Limited Altitude| Below 5000 metres

Name and Content of Toxic and Harmful Substances in This Product

Part Name

| Toxic or Harmful Substances and Elements
---|---

Plumbum (Pb)

|

Mercury (Hg)

|

Cadmium (Cd)

|

Chromium (Cr(VII))

|

VII

| Polybrominated biphenyl (Cr(VII))| Polybrominated diphenyl ethers (PBDE)
Circuit Board| | | | | |
Head of printer| | | | | |

: Means that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit
specified in SJ/T113363-2006.
: Means that the content of the toxic and hazardous substances at least in a homogenous material of the component exceeds the limit specified in SJ/T113363-2006. However, the components marked with “X” in the above table are out of proportion because there is no mature alternative technology in the industry at present.

Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance with the electronic information products control and management measures or local environmental laws and guidelines. They should not be discarded at will or with household waste.

Product Warranty Card

Model No. : I20S01
Serial No.: __
Purchase Date: ____ _
Warranty Period: The warranty period commences on the date of purchase.
We offer 365 days  warranty service.
User Phone: __ _
User Address: ____

iMin does not warrant against the following:

• Disassembled or repaired product by unauthorized service provider without our consent.
• Damaged product barcode, fragile sticker and altered or defective warranty card.
• Damage caused by non-compliance with instructions in this user manual.
• Damage caused by exposure to sources of liquid, dripping or splashing, normal wear and tear, accident or abuse.
• Failure or damage as a result of any Force Majeure Event.
• Expired warranty period.

Packing Content

• Device x 1, Antenna x 1, Power Cable x 1, Key x 2
• POS Mount bracket x 1, M4 Machine Screw x 3, M3 Machine Screw x 3
• User Manual x 1 (including warranty card, product qualification certificate)

Qualification Certificate
Passed Inspection

Safety Information

Safety and Handling

• Please plug-in power adapter to only its corresponding AC socket.
• Do not use in explosive gas atmosphere.
• Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorized service provider.
• This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions and other electronic devices.
• About the battery replacement:
  1. Do not attempt to replace the Self Service Device battery yourself – you may damage the battery, which could cause overheating, fire and injury.
  2. The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by iMin or an authorized service provider, and must be recycled or disposed of separately from household waste.

Company Statement
Our company is not responsible for the following actions:

• Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual.
• We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products.
• The operating system of this product is supported by official regular OS update. If the user breached the third party’s ROM system or change the system file by hacking, it may cause unstable, undesired system operation and bring security risk.

Advices

• Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog.
• Do not use the device in extreme cold or hot environments eg, near a fire or lit cigarette.
• Do not topple, throw, or bend.
• Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
• Do not attempt to use the device near medical equipment.

Important Safety Information

• Do not install or use during thunder storms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit.
• If you find unusual odour, overheating or smoke, please cut off the power immediately.
• Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.

Disclaimer
Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specification without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>