imin I21D02 D1 Pro All-In-One POS Device User Manual

imin I21D02 D1 Pro All-In-One POS Device

Introduction

Printer User Guide

1. Unscrew the printer cover and the paper compartment door pops open;
2. Insert the thermal paper and pull out part of it outside the paper exit of the printer, then close the paper compartment cover;
3. After printing, tear the paper upwards.

Technical Specifications

OS| Android 11 Go Edition (suitable for 2GB RAM)/ Android 11 (suitable for 4GB RAM)
---|---
CPU| 8-Core, 2 x A75 and 6 x A55, 1.8GHz/ 8-Core, 2 x A75 and 6 x A55, 2.0GHz
Main LCD Display| 13.3 inches, resolution: 1920 x 1080, multi-touch capacitive screen
Secondary LCD Display| 2.4 inches, resolution: 240 x 320
Storage| 2GB RAM (optional 4GB) + 16GB ROM
Camera| 0.3M, FF
Wi-Fi| Support 802.11a/b/g/n/ac
Bluetooth| 5.0BLE
Card Slot| 2 x SIM
Network| 2G/3G/4G
NFC| Optional, default none
Printer| 58mm thermal printer, support the paper roll with maximum 40mm diameter
Speaker| 1.5W
External Interface| 1 x DC-in, 1 x RJ12 (12-24V), 1 x RJ45, 4 x Type-A port, 1 x SIM Card Slot
Power Adapter| Output power 36W, Input: AC100~240V/1.5A, Output: DC24V/1.5A
Machine Size| 325.5mm x 208.2mm x 89.8mm
Operating Temperature| 0℃ to +50℃
Storage Temperature| -20℃ to +60℃
Operating Humidity| 10% to 90% r.H.
Limit Altitude| Max. 5000 meters

Safety Information

Safety and Handling

•  Please plug in the power adapter to only its corresponding AC socket.
•  Do not use it in an explosive gas atmosphere.
•  Do not disassemble the equipment. It should be serviced or recycled only by iMin or an authorized service provider.
•  This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
•  About the battery replacement:
  1.  Do not attempt to replace the battery yourself – you may damage the battery, which could cause overheating, fire and injury.
  2.  The replaced/ used battery should be disposed of according to local environmental laws and guidelines. Do not dispose in f ire. It should be serviced or recycled by iMin or an authorized service provider and must be recycled or disposed of separately from household waste.

Company Statement
Our company is not responsible for the following actions:

•  Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specif ied in this instruction manual.
•  We will not be responsible for any damage or problem caused by third party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products.
•  The operating system of this product is supported by off-icial regular OS updates. If the user breached the third party’s ROM system or changes the system f ile by hacking, it may cause unstable, undesired system operation and bring security risk.

Advice

•  Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog.
• Do not use the device in extreme cold or hot environments eg, near a f ire or lit cigarette.
• Do not topple, throw, or bend.
• Use in optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
• Do not at tempt to use the device near medical equipment.

Important Safety Information

•  Do not install or use during thunderstorms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit.
•  If you f ind unusual odour, overheating or smoke, please cut off the power immediately.
•  Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in explosive gas atmosphere.

Disclaimer
Due to regular updates and enhancements made to the product, some details of this document may be inconsistent with the physical product. Please take the product you received as current standard. The right to interpret this document belongs to our company. We reserve the right to amend this specif icat ion without prior not ice.

Name and Content of Toxic and Harmful Substances in This Product

Part Name

| Toxic or Harmful Substances and Elements
---|---
Plumbum      Mercury       Cadmium Chromium VII Polybrominated Polybrominated (Pb)                        (Hg)                        (Cd) (Cr(VII))       biphenyl         diphenyl ethers

(Cr(VII))               (PBDE)

Circuit Board|
Head of Printer|

Head of Printer
Means that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit specif ied in SJ/ t113363-2006. Means that the content of the toxic and hazardous substances at least in a homogenous material of the component exceeds the limit specif ied in SJ/ t113363-2006. However, the components marked with ” ” in the above table are out of proportion because there is no mature alternative technology in the industry at present. Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance with the electronic information products control and management measures or local environmental laws and guidelines. They should not be discarded at will or with household waste.

Product Warranty Card

• Model No.: I21D02
• Serial No.:
• Purchase Date:
• Warranty Period: The warranty period commences on the
• date of purchase. We offer 365 days warranty service.
• User Phone:
• User Address:

iMin does not warrant against the following:

•  Disassembled or repaired product by unauthorised service provider without our consent.
•  Damaged product barcode, fragile sticker and altered or defective warranty card.
•  Damage caused by non-compliance with instructions in this user manual.
•  Damage caused by exposure to sources of liquid, dripping or splashing, normal wear and tear, accident or abuse.
•  Failure or damage as a result of any Force Majeure Event.
•  Expired warranty period.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>