ONKRON TS1350 TV Stand with Wheels User Guide

ONKRON TS1350 TV Stand with Wheels

Information And Introduction

Information

• Mobile Cart for TVs & Interactive Touch Panels 32″-70″

Thank you for choosing ONKRON!
We want you to be completely satisfied with your new unit. Please, if you have any questions, issues, or safety concerns, contact our sales team. We will respond promptly.

BECAUSE WE CARE

• Please share your thoughts and feelings or ideas with us about our product. Help us to continue to deliver the best quality designs. Please take a moment and leave us an online review. Thank you! Sincerely, ONKRON.
• If you have questions about the assembly and operation of the product and if the product is damaged, do not return the product to the store! Contact our customer

service:

• USA: info@onkron.us / +13159682278
• United Kingdom (UK): info@onkron.co.uk +442086387461
• Europe: info@onkron.de / +494029996807

IMPORTANT

• Verify from the checklist all components are included BEFORE installation. Contact our sales support team for replacements if any parts are missing or appear defective.
• Verify the screen is compatible with the unit BEFORE attaching it to the mounting bracket according to VESA patterns and support screen weight. Installation may require a professional.

CAUTION

• Please read the entire instructions and safety guidelines before assembly. Failure to do so may cause personal injury, product damage, and additional property damage.
• Always wear suitable personal protective equipment and use the correct tools to safety perform the installation.
• DO NOT exceed the maximum weight rating of the unit, make non-factory approved modifications, use the unit outside of its factory-approved purpose, or OVERTIGHTEN any assembly screws used to join components.
• Use only the factory-provided mounting screws as indicated in the instructions Ensure the construction of attaching surfaces has the structural integrity to support the combined weight of the unit and all additional hardware and components. Also, be aware of the working environment surrounding the unit which could result in accidental damage such as (but not limited to), foot traffic, shelves containing objects that may fall, and insufficient workspace. The user must exercise due diligence.
• Keep children away from the assembly hardware. The small pieces may result in choking if swallowed.

WARRANTY

Unlimited lifespan. 5 YEARS WARRANTY.

Assembly Kit/Bausatz

Base assembly

• Lock all the wheels, as shown in the picture above.
• Put the base of the stand on the box upside down. Twist the wheels into the base.
• Put the base on the wheels with the back side to you.

Installation of the columns on the base.

• Put columns into the base with the cable management holes facing the backside of the base.
• Use two screws (A2) and key (F2) to fix the columns on the base from above.
• Use two screws (A2) and key (F2) to fix the columns under the base.
• Install a plastic panel to cover two screws between columns.

Height adjustment

• Remove safety screws from the columns using a key (F2).
• Push simultaneously on two spring-loaded buttons on both columns and set the desirable height of the stand. Buttons will automatically be fixed in the next free slot.
• Put safety screws back in the place, where two columns are connected. Tighten them using a key (F2).

VESA panel installation

• Install the VESA panel on the columns using screws (B2) and key (F2).
• Set the desired angle of the panel from 0° to 90°.

ATTENTION! All screws must be securely tightened.
DO NOT OVERTIGHTEN THEM!

DIMENSION

Possible VESA patterns and their sizes

TV/touchscreen mounting

1. Hang your TV/touchscreen with pre-installed rails onto the VESA panel of the stand.
2. Make sure the screen is centered.
3. Insert locks (D2) into their slots on the rails.
4. Locks (D2) must be installed very closely to the VESA panel.
5. Tighten screws (C2) to fix the horizontal movement of the TV. Use a screwdriver.

ATTENTION! To avoid accidents, two people should participate in the installation and adjustment of the TV/touchscreen panel.

Assembly and installation of the shelf

• Use a screwdriver to remove four screws from the shelf.
• Install shelf holders fixing screws 1 and 3, as shown in the picture above.
• Put the half-ring in the shelf holder. Turn it to make a full ring and to match two holes. Repeat for the second half-ring.
• Now you can tighten screws 1 and 3.
• Install the shelf at the desired height. Connect the half-rings to shelf holders using screws (A2) and key (F2).
• Now you can put and tighten screws 2 and 4.

Cable management

• Insert protective rings into holes.
• Lay cables through cable management holes from top to bottom.
• Unlock the wheels.

WARNING: Protective rings are necessary because they prevent cables from damage on a sharp metaledge.

Contact

Importer to the USA

• BM Global Group Corp., 16801 Addison Rd, Suite 124
• Addison Texas USA 75001
• Phone: +1 315 968 22 78
• info@onkron.us
• Learn more
• www.onkron.us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>