manhattan 180856 120 W 10-Port USB Charging Station Instructions

July 9, 2024
Manhattan

10-Por t USB Charging
Station – 120 W Instructions
Mode180856

180856 120 W 10-Port USB Charging Station

Important : Read before use.

  1. Use the included power cable to connect the charging station to an AC outlet.

  2. Place devices to be charged in bays. Use a USB cable to connect them to an appropriate USB port:
    • USB-C ports (PD) provide up to 18 W per port to Power Delivery devices; non- PD devices will charge at 12 W.
    • USB-A ports provide up to 12 W per port to any device.

  3. Turn the power switch to On (I).

  4. LED power indicator.

For specifications, go to manhattanproducts.com.

For additional benefits: Scan to register your product warranty or go to: register.manhattanproducts.com/r/180856

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

Disposal of Electric and Electronic Equipment (applicable in the E.U. and other European countries with separate collection systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY AT:manhattanproducts.com

REGULATORY STATEMENTS

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B digital devicwe, pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment to an outlet on a circuit different from the receiver; or consult the dealer or an experienced radio/TV technician for help.

CE/UKCA
This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016), 2019/1782/EU (UKCA The Ecodesign for Energy-Related Products Regulations 2010) and / or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity for is available at: support.manhattanproducts.com/barcode/180856

POWER INFORMATION

Input :| 100 — 240 VAC,
50 — 60 Hz,
2.0 A max.
---|---
Output (USB-C) :| 5.0 V/3.0 A, 15.0 W;
9.0 V/2.0 A, 18.0 W;
12.0 V/1.5 A, 18.0 W
Output (USB-A) :| 5.0 V/2.4 A,12.0 W
Max Output USB-C ports :
Max Output USB-A ports :| 54.0 W (max.)
66.0 W (max.)
Max Output Power :| 120.0 W
Average Active Efficiency (%) :| 80%
Low-Load Efficiency (10%) :| 76%
No-load Power| 0.65 W

North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677, USA

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved.
Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries.
****Printed on recycled paper.
MH_180856_QIG_0922_REV_5.11

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Manhattan User Manuals

Related Manuals