manhattan 462501 TV and Monitor Mount Desk Instructions

manhattan 462501 TV and Monitor Mount Desk

Specifications

• Model: 462501
• Material: Aluminum
• Product Type: Gas Spring Desk Mount
• Adjustment Range: 10-83mm
• Includes: Allen Key, Screws

Product Usage Instructions

Assembly:

1. Place the mount in the desired position on your desk.
2. Adjust the angle as needed.
3. Use the supplied Allen Key to tighten the screws. Alternate between each screw as you tighten them.

Adjusting Spring Tension:

1. Position and hold the arm horizontally.
2. Use the Allen Key to adjust the spring tension by turning the adjustment screw.
3. Ensure the arm is properly balanced with monitors mounted.

FAQ

• How do I properly tighten the screws?
  Adjust to the desired angle, then use the Allen key to tighten the screws. Alternate between each screw as you tighten them. Do not overtighten the screws.

• Where can I find additional technical specifications?
  Additional technical specifications can be found on manhattanproducts.com. You can also register your product on the website for warranty purposes.

• How do I contact support for further assistance?
  For support inquiries, visit support.manhattanproducts.com or contact the respective regional office based on your location as mentioned in the user manual.

Safety Precautions

• Avoid potential injuries or property damage! Manhattan is not responsible for damage or injury caused by incorrect assembly or use.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Be sure that you understand all instructions before you begin assembly. Ensure that you have received all parts according to the component checklist prior to installation.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
• This product is intended for indoor use only.
• Maintenance: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
  For specifications, go to manhattanproducts.com. Register your product at register.manhattanproducts.com/r/462501 or scan the QR code below.

PART LIST

INSTALLATION INSTRUCTION

• **STEP 1 & 2

**

• STEP 3
  To properly balance the arm with monitors mounted, adjust the spring tension using the supplied Allen Key:

1. Position and firmly hold the arm horizontally as shown.
2. Turn the adjustment screw until it stays in horizontal position:
  * if the arm drops, turn Counter-clockwise;
  * if the arm rises, turn Clockwise.

• **STEP 4

**

• **STEP 5

**

ABOUT COMPANY

• North & South America
  • IC Intracom Americas
  • 550 Commerce Blvd.
  • Oldsmar, FL 34677
  • USA
• Asia & Africa
  • IC Intracom Asia
  • 4-F, No. 77, Sec. 1, Xintai 5th Rd.
  • Xizhi Dist., New Taipei City 221
  • Taiwan
• Europe
  • IC Intracom Europe
  • Löhbacher Str. 7
  • D-58553 Halver
  • Germany
• support.manhattanproducts.com/barcode/462501

References

• Manhattan Products: HDMI Adapters, Cables, TV Mounts, Barcode Scanners
• Manhattan Products Account and Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>