MANHATTAN COMFORT 109GMC Armoire Wardrobe Closet Instruction Manual

MANHATTAN COMFORT 109GMC Armoire Wardrobe Closet

Product Information

Specifications:

• Model: 109GMC
• Version: V.01092023
• Weight: 11 lb
• Components: Refer to the list provided
• Hardware and Tools: Refer to the list provided

Product Usage Instructions

• Step 01 – Assembling Slides:
  Use hardware (C) to apply slides (part 18) on parts 16 and 17.

• Step 02 – Connecting Panels:
  Using hardware (G), connect part 16 to part 03 and part 17 to part 04.

Frequently Asked Questions (FAQ):

• Q: What tools are needed for assembly?
  A: You will need a Philips screwdriver, screwdriver, and the tools O, P, and Q as indicated.

• Q: What should I do before starting the assembly process?
  A: Before assembling, make sure to take a picture of the labels on the packages for assistance demands.

• Q: How do I identify the slides for assembly?
  A: The left panel slides are identified as part 16, and the right panel slides are identified as part 17.

Included in the package

1. Base = 01 piece (box 1/2)
2. Lower Bar = 02 pieces (box 2/2)
3. Left Side Panel = 01 piece (box 2/2)
4. Right Side Panel = 01 piece (box 2/2)
5. Top Panel = 01 piece (box 1/2)
6. Front of the Drawer = 02 pieces (box 2/2)
7. Left Side Panel of the Drawer = 02 pieces (box 1/2)
8. Right Side Panel of the Drawer = 02 pieces (box 1/2)
9. Rear Panel of the Drawer = 02 pieces (box 2/2)
10. Base of the Drawer = 02 pieces (box 1/2)
11. Shelf of the Drawers = 01 piece (box 2/2)
12. Adjustable Shelf = 02 pieces (box 1/2)
13. Upper Bar = 01 piece (box 2/2)
14. Back Panel = 05 pieces (box 2/2)
15. Union Plastic Profile = 04 pieces (box 1/2)
16. Left Support of the Slides = 01 piece (box 1/2)
17. Right Support of the Slides = 01 piece (box 1 /2)
18. Slides = 02 pieces (box 1/2)

Hardware (box 1/2)

Tools needed (not included)

ATTENTION:
BEFORE START ASSEMBLING TAKE A PICTURE OF THE LABELS ON THE PACKAGES, THIS WILL BE REQUIRED IN CASE THE PRODUCT HAS ANY ASSISTANCE IN DEMAND.

HOW TO IDENTIFY THE SLIDES?

WICH HOLES TO ATTACH THE SCREWS ?

Installation Instruction

Step 01
Use the hardware ( C ) to apply slide 18 on parts 16 and 17.

ATTENTION!
It is mandatory to apply the screw (C), observe there is no hole at this position.

Step 02
Using hardware (G) connect part (16) to part (03) and part (17) to part (04).

Step 03
Fix the hardware (H) onto the part (03) and the part (04) with the hardware (C ). Connect the part (16) and part (17) with the hardware (D).

Step 04
Connect the part (01) onto the part (02) with the hardware (B).

Step 05
Connect the part (13) onto the part (05) with the hardware (J) and the hardware (A).

Step 06
Connect the part (01), the part (02), the part (11) and the part (05) onto the part (03) and the part (04) with the hardware (B).

Step 07
Connect all the parts (14) joining with the part (15) and the hardware (I).

Step 08
Connect part (13) onto part (03) and part (04) joining the corners with the hardware (J) with the hardware (A).

Step 09
Connect the parts (07), (08) and (09) with the hardware (B). Apply the part (10) in the groove of the parts (07) and (08) until the groove of the part (09).

Step 10
Connect parts (07), (08) and (06) using the hardware (E + F). Apply the hardware (M) on the hardware (F).

Step 11
Use the hardware (C) with the hardware (L) as shown in detail.

Step 12
Connect the hardware (N) onto the part (06) with the hardware (C ).

Step 13

• You must apply the screws to the holes indicated by the arrows.

Step 14
Apply the hardware (K) into the part (03) and the part (04) to support the part (12).

Step 15
Install the drawer fitting it into the glides fixed on the side of parts (03) and (04).

Step 16

Attention! Tipover System

WARRANTY POLICY

• All Manhattan Comfort furniture products are warranted, to the original purchaser at the time of purchase and for 30 days thereafter.
• Our warranty is limited to new products purchased in factory-sealed cartons. This warranty is valid in the United States of America and Canada.
• To provide you with timely assistance, please thoroughly inspect your furniture for missing or defective parts immediately after opening the carton.
• Manhattan Comfort offers a 30-day parts replacement warranty on all items.
• Our furniture products are not intended for outdoor use.

THE WARRANTY DOES NOT COVER:

• Defects/damages by improper assembly or disassembly.
• Defects/damages caused by shipping. Claims for damage during transit should be placed immediately with the transportation company.
• Defects/damages caused by inappropriate use of the furniture.

CONTACT US

• 319 Ridge Rd. Dayton, NJ 08810
• 908-888-0818

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>