KAF-45SZ Kickass 45L Portable 12V Fridge Freezer User Manual

KAF-45SZ Kickass 45L Portable 12V Fridge Freezer

Thank You

Thank You For Purchasing A Kick Ass Fridge / Freezer

Please read all instructions and the safety section carefully before using your new Kick Ass refrigerator.

FEATURES

• Digital electronic thermostat with LED temperature display.
• Bluetooth so you can monitor and control your fridge from your smartphone.
• Genuine Secop compressor so your fridge will always run reliably and quietly.
• Efficient design that won’t drain your battery.
• Multi-voltage system (DC 12V / 24V) and (AC 100V / 240V).
• Anderson-style connection.
• Adjustable low voltage battery protection, reverse polarity protection and high temperature protection,
• USB charging port so you can recharge your phone and devices.

Please read all the instructions and safety guidelines to ensure you get the most out of your new fridge.

IMPORTANT SAFETY SYMBOLS

Warning! – Safety Directive
Failure to observe this could lead to serious injury.

Caution! – Safety Directive
Failure to observe this could lead to injury or damage to the appliance.

Note! – Important Information
Failure to observe this may lead to damage to the appliance or reduced performance.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Do not touch exposed cables.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not use or attempt to repair damaged power cords. If the AC power cord is damaged, it must be replaced by Kick Ass Products or an authorised service agent.
WARNING: Do not keep multiple portable socket-outlets or portable power pack at the rear of the appliance.
CAUTION: Any installation of DC power systems should be handled by a qualified professional, ensuring the source voltage is correct.
WARNING: Do not place any electrical devices inside the refrigerator as moisture could harm these devices.
CAUTION: Disconnect both DC and AC power supplies when cleaning or when not in use.
WARNING: The refrigerator should only be maintained by a Kick Ass Products authorised repair centre. Improper or unauthorised maintenance work may void the warranty.
WARNING: The fridge must not be used to store aerosols, flammable items, or corrosive or explosive materials.
WARNING: Ensure the fridge is kept dry and all times – do not expose to rain or moisture. WARNING: Children should be supervised at all times around the appliance.
WARNING: This appliance contains the fluorinated greenhouse gas R134a. Please refer to your local regulations regarding the correct way to dispose of this appliance due to the flammable insulation blowing gas it contains.
WARNING: This appliance is not intended to be used in households or for other similar applications, such as:

• Staff kitchen areas, offices, or other working environments.
• Commercial hotels, motels and other residential environments.
• Catering, commercial kitchens, or retail environments.

CARE AND MAINTENANCE INSTRUCTIONS

Clean the appliance inside and out with a damp cloth after every use. If it is dirty, use sodium bicarbonate dissolved in lukewarm water to clean the unit. Note:

• Never use abrasive products, detergents or soap. After washing, rinse with clean water and dry carefully. Do not leave the refrigerator off with food inside or lid closed.
• Never clean the appliance under running water.

CORRECT DISPOSAL OF THIS PRODUCT

This symbol indicates that this product should not be disposed of with other household waste. To prevent harm to the environment and human health from unsafe disposal, recycle it responsibly or refer to your local regulations regarding the correct way to dispose of this appliance.

CONTENTS OF THE BOX

• AC Power Cable

• Kick Ass Fridge / Freezer – Main Unit

• 12V DC Anderson Style Power Cable

• 12V DC Anderson Style to Cigarette Plug Adapter

SETUP

CONNECTING THE FRIDGE TO POWER

Connecting to AC
To connect to AC Power, connect the supplied AC Plug to the input port on the fridge and switch on the power. Ensure the mains power supply is adequately protected with a residual current device.

Connecting to DC
To connect to DC power, use the supplied 7ft Anderson to Anderson style extension lead, ensuring the end with the fuse is furthest away from the fridge. If using the Cigarette socket extension cable, ensure the wiring between the battery and socket is capable of handling up to 10A.

AC/DC Priority
With both AC and DC sockets connected, the internal power supply board will priorities AC power over DC power, ensuring the battery powering the fridge is not discharged.

CONTROL PANEL

CONTROL PANEL LIGHTS

Cooling Speed Light : The cooling speed light will glow red if set on quick, green if set on normal and blue if set on eco. The cooling speed controls the compressor run speed.
Bluetooth Light : The Bluetooth light will glow blue when a Bluetooth connection is established.
Run Light: The run light indicates when the compressor is running. If power is connected, the light will glow red. If the compressor is running, the light will glow green.
Battery Protection Light : The selected battery protection setting light will glow green

LOW BATTERY PROTECTION SETTINGS

The fridge is equipped with three battery protection settings; high, medium and low. The below settings should be set for the specific battery type being used.

Note: With the compressor running, minor voltage drop may occur, and you can expect to lose 0.3-0.5V depending on the wiring used to connect your battery to the fridge. For some battery types, voltage drop may occur when a load is applied, which can also affect the reading and cutout voltage of the fridge.

DC SOURCE|  | LOW BATTERY PROTECTION| MEDIUM BATTERY PROTECTION| HIGH BATTERY PROTECTION
---|---|---|---|---
12V| Cut Out Voltage| 10.1V +/-0.3V| 11.4V +/-0.3V| 11.8V +/-0.3V
Cut In Voltage| 11.4V +/-0.3V| 12.2V +/-0.3V| 12.6V +/-0.3V
24V| Cut Out Voltage| 21.5V +/-0.3V| 24.1V +/-0.3V| 24.6V +/-0.3V
Cut In Voltage| 23.0V +/-0.3V| 25.3V +/-0.3V| 26.2V +/-0.3V

USING THE CONTROL PANEL

TURN FRIDGE ON OR OFF| When fridge is off, hold power button for 3 seconds to turn on.
When fridge is on, hold power button for 3 seconds to turn off.
---|---
SETTING THE TEMPERATURE| To change the temperature, press the once until the display starts flashing. Use the and to select the desired temperature. Wait until the screen stops flashing and the setting will be saved
SETTING THE TEMPERATURE UNITS| To change the temperature display between Fahrenheit and Celsius, press twice until only the unit (C or F) is flashing. Select Fahrenheit or Celsius using the and buttons. Wait until the LCD screen stops flashing and the setting will be saved.
SETTING COMPRESSOR SPEED| To change the compressor speed between quick, normal and eco, press the 3 times simultaneously until the display starts flashing with the current compressor speed setting. Navigate through the options using the and buttons. Wait until the LCD screen stops flashing and the setting will be saved.
SETTING THE VOLTAGE PROTECTION LEVEL| To set the voltage protection level, press the to change the setting between high, med, and low, as indicated by the LED.
VIEWING THE BATTERY VOLTAGE| To display the voltage of the battery connected, press the button. Note: If the compressor is running, indicated by the run light glowing green, the voltage displayed may be misrepresented by up to 0.5V due to voltage drop between the battery and the control board.
VIEWING THE FRIDGE’S BLUETOOTH CODE| To view the fridge’s Bluetooth code, press the button to display a 4 digit number.

BLUETOOTH CONNECTION

BLUETOOTH APP

To get started please download the KA Products Main App from the Google Play Store or the Apple iTunes Store. If the App is already downloaded on your device, you must ensure that any updates to the App are installed prior to connecting.

| |
---|---|---
|

CONNECTING TO THE FRIDGE

On the App, find the device with the ID KickAss00xxxx that matches the fridge’s device ID. This can be found by pressing the button on the control board. Clicking on the device should prompt the user to enter a password. The password for the fridge is “00xxxx” where xxxx corresponds to the device ID. Once connected, the fridge will pair automatically.

USING THE APP

Home Page

The home page can be used to view the current status, battery protection and cooling speed settings of the fridge. The voltage of the battery can also be viewed via the App. NOTE: If the compressor is running, the voltage displayed may be misrepresented by up to 0.5V due to voltage drop.

Settings Page
The settings page can be used to set the temperature. It can also be used to adjust battery protection, cooling speed and change the unit of temperature display.

Graphical Display Page

The graphical display page can be used to map the 24 hour temperature as well as the 24 hour voltage of the battery being used.

TROUBLESHOOTING THE BLUETOOTH APP

I cannot see or connect to the Bluetooth app.

• Ensure Bluetooth is activated on your device.
• Make sure you are in range of the fridge (normally around 30 feet).
• Make sure you are using the correct verification code for the Bluetooth App.
• Try turning the Bluetooth off and on.

If the above does not work, try the following:

• Ensure you are using the latest version of the App, and that there are no outstanding updates.
• Uninstall the App, and close any other apps running in the background.
• Turn both the fridge and the phone off for a couple of minutes.
• Reinstall the App.
• If you’re still having problems, contact Kick Ass.

ROTATING THE LID

The lids can be rotated so that they can be opened from either side of the fridge. To do this, follow these instructions:

• Unbolt the hinges and the latches from the base of the fridge and remove the screws covering the blank holes on either side.

• Lift lid away from fridge base.

• Rotate the lid and match the latches & hinges to their respective threaded holes. If using the case, the lid covers will also need to be rotated with the lids.

• Position lid in place.

• Screw the hinge and latches in place and return the screws covering the blank holes

EMERGENCY OVERRIDE SWITCH

The emergency override switch can be used in the event of an electronic control or display board failure. For normal operation the switch should be left in the OFF position. If an electronic failure occurs, slide the switch to the ON position. In this case, the fridge will run at full cooling capacity.

TROUBLESHOOTING

The appliance is not turning on

• Hold down the ON button.
• Check the power supply is sufficient.
• Check the cable and Anderson style plug have a good connection.
• If using a DC connection, attempt to plug in an AC connection.
• If using an AC connection, attempt to plug in a DC connection.
• Check to see whether the fuse in either the Anderson to Anderson connection or the Cigarette socket needs replacing.

The food inside is frozen

• The temperature of your fridge is too low. Check the temperature on the control board, and remember that the actual temperature of the fridge may differ by +/- 3 degrees.
• Ensure the Override Switch is in the OFF position.

The fridge is not staying cool

• The temperature setting is inappropriate.
• The lid is unlocked/or open.
• The lid seal is broken.
• There is insufficient ventilation around the fridge.
• Too much warm or hot food has been placed inside the refrigerator, and it may take longer than usual to cool down.
• The ambient temperature is to high or there is a heat source near the fridge.

The sound of water can be heard from inside the unit

• This is normal, due to the flow of the refrigerant.

The fridge is making an unusual noise

• Ensure the refrigerator is on a level surface.
• There may be loose components inside the fridge – if this happens, contact Kick Ass.

ERROR CODES

• Please check the source voltage to ensure it is above the cut out. Try lowering the
  voltage cut out setting to LOW.

• The cables used may be insufficient – try with bigger or better quality cables.

• Try a different power source.

ERROR 2| Fan is drawing too many Amps (more than 1 Amp).

• Disconnect the fridge for 30 minutes and reconnect.
• Attempt to plug it in with both AC and DC power sources.
  If this does not resolve issue, contact Kick Ass Products.

ERROR 3| Possible electronic box or compressor fault.

• Unplug for 10 minutes.
• Attempt to plug it in with both AC and DC power sources.
  If this does not resolve issue, contact Kick Ass Products.

ERROR 4| Compressor speed is too low.

• Unplug for 10 minutes
• Move unit to a lower ambient temperature
• Attempt to plug it in with both AC and DC power sources
  If this does not resolve issue, Contact Kickass Products

ERROR 5| Ambient temperature too high.

• Clean vents/ensure clear air flow.

ERROR 7| Thermostat short circuit fault.

• The thermostat has likely failed, contact Kick Ass Products.

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this product not authorized by Kick Ass could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.

Exposure to radio frequency energy. The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.

| | |
---|---|---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>