HiKOKI UB 18DJL 18V Cordless Worklight Instruction Manual

HiKOKI UB 18DJL 18V Cordless Worklight

Product Information

Specifications

• Model: UB 18DJL
• Switch: LED Torchlight & LED Worklight
• Battery: Sold separately
• Features: Latch, Slide hook, Strap hook

Product Usage Instructions

Switch Functionality

• The device has two modes: LED Torchlight and LED Worklight.
• Toggle between modes using the switch.

Battery Installation

• Insert the compatible battery (sold separately) following the polarity markings. Ensure a secure fit before use.

Attachment Hooks

• Use the slide hook and strap hook for convenient hanging or carrying options. Ensure proper engagement for safety.

FAQ

1. Can I use any battery with this device?
   • No, only compatible batteries should be used as indicated in the user manual to ensure optimal performance and safety.
2. How do I clean the device?
   • Use a soft, dry cloth to clean the device. Avoid using water or harsh chemicals to prevent damage.
3. What should I do if the device malfunctions?
   • If you encounter any issues, refer to the troubleshooting section of the user manual. If problems persist, contact customer support for assistance.

OVERVIEW

Symbols

• WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use.
• To reduce the risk of injury, a user must read the instruction manual.
• Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Only for EU countries

• Do not dispose of electric tools together with household waste material
• In observance of European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation under national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
• When the light is lit, do not look directly into it, aim it at a person or animal, or direct it toward the eyes.
• Doing so may harm the eyes.

WARNING:

• Be careful of electrical shock.
• When not in use or during inspection and maintenance, be sure to turn the switch OFF on the unit, and remove the battery from it.
• Do not cover the work light with cloth, cardboard, or other materials when the light is on. Doing so may result in fire.

CAUTION:

• Do not use any other than the specified batteries.
• The LED cover will remain at a high temperature when alight and immediately after use, so do not touch it.
• Be sure to turn the switch OFF when not using.
• Do not expose the work light to rain.
• Do not shock or disassemble the work light.
• Do not allow the work light to contact with gasoline, thinner, etc.
• Do not leave the work light in a car or the like that tends to be exposed to be searching heat of the sun (above 50 °C). Otherwise, troubles can result.

SPECIFICATIONS

(height)
Weight (without battery)| 0.3 kg
Battery| 18 V| 14.4 V
---|---|---
BSL1850| BSL1840| BSL1825| BSL1450| BSL1440| BSL1425
Torchlight               (h)| 43| 35| 22| 37| 30| 18
Worklight [High/Medium/Low] mode (h)| 16 / 30 / 51| 13 / 24 / 41| 8 / 15 / 26| 15 / 28 / 49| 12 / 23 / 39| 8 / 14 / 25

• Operating time (Approx.): Using a fully charged battery
• Please refer to (Fig. 8) for batteries that can be used.

HOW TO USE

1. Battery insert/removal: Insert the battery in direction A until it clicks. To remove it, extract it in direction B while holding down the latch. (Fig. 3)
2. Each press of the switch will cycle the light through “Torchlight”, “Worklight (High)”, “Worklight (Medium)”, “Worklight (Low)” and “Off ”.
3. As shown in (Fig. 4), the facing of the work light portion can be changed. Move the work light portion by hand to point the light in the desired direction.
4. Use either the slide hook (Fig. 5) or the strap hook (Fig. 6) when hanging the unit from a pipe.

CAUTION:

• Use a cord or a similar article to fix the unit in place to prevent it from falling.
• When battery power is low, the battery protection function will switch the light off. For torchlight, the light will dim and go out. For the worklight, the light will first switch over to single LED illumination, and then go out (Fig. 7).
• Please remove the battery if the unit will not be used for a long time.
• NOTE: Make sure the instruction manuals supplied with the separately purchased chargers and batteries are read thoroughly before use.

GUARANTEE

• We guarantee HiKOKI Power Tools under statutory/country-specific regulation. This guarantee does not cover defects or damage due to misuse, abuse, or normal wear and tear.
• In case of complaint, please send the Power Tool, undismantled, with the GUARANTEE CERTIFICATE found at the end of this Handling instruction, to an Authorized Service Center.
  NOTE: The specifications herein are subject to change without prior notice.

GUARANTEE CERTIFICATE

1. Model No.
2. Serial No.
3. Date of Purchase
4. Customer Name and Address
5. Dealer Name and Address (Please stamp dealer name and address)

EC DECLARATION OF CONFORMITY

• We declare under our sole responsibility that Cordless Work Light, identified by type and specific identification code 1), conforms with all relevant requirements of the directives 2) and standards *3).
• Tim Sieberns who is authorized to compile the technical file is at *4) – See below.
• The declaration applies to the product affixed CE marking

Hikoki Power Tools Deutschland GmbH Siemensring 34, 47877 willich, Germany

• Tel: +49 2154 49930
• Fax: +49 2154 499350
• URL: http://www.hikoki-powertools.de

Documents / Resources

| HiKOKI UB 18DJL 18V Cordless Worklight [pdf] Instruction Manual
C99211855, 406, UB 18DJL 18V Cordless Worklight, UB 18DJL, 18V Cordless Worklight, Cordless Worklight, Worklight
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>