PHILIPS MAS LED SON-T Ultra Efficiency Installation Guide

PHILIPS MAS LED SON-T Ultra Efficiency

IMPORTANT INFORMATION

Please take the time to read this installation guide. The guide contains important information and notes regarding the installation and operation.

IMPORTANT!

• Always switch off the power supply before commencing work!
• Please read the installation instructions carefully and follow the wiring instructions to ensure safety.
• The product is NOT dimmable.
• The product can be operated on Direct Mains Only.
• The product is not compatible with electronic gear or ElectroMagnetic (EM) gear. Please remove all igniter and capacitor installed.
• The product is suitable to be used in outdoor and industrial applications.
• Suitable for use in operating temperature range between -30°C to +45 °C.
• Do not change the structure or any components of the product to ensure safety.
• The product is designed to fit in standard IEC-compliant E27/E40 lamp holders.
• The product should be installed by a qualified professional.
• Perform inspection before installation to ensure the luminaire and lamp holder are in good condition to carry the weight and performance of the product.
• Do not use in open luminaire.
• *The product fulfills IP65 requirements except lamp cap, outdoor applications require the lamp to be used in luminaires with a suitable IP rating.
• Lamp cap needs to be installed in correct IP-rated socket.
• Please do not apply the product in applications that contains emergency or/or explosive-proof luminaires.
• The total system performance may vary depending on the lighting/luminaire system.
• For latest information, please refer to www.philips.com/lighting.
• In case of doubt, please consult Philips representative.

DISCLAIMER:
Signify disclaims liability for any direct, indirect or incidental damages in case of installation performed either not according to this guide or not performed by a professional electrician.

REPLACING THE HPUSON/Other Lamps

For replacing HPUSON/Other Lamps, Convert to Direct Mains:

SYMBOLS

• Caution, risk of electric shock! Do not dismount lamp housing and light source.
• Dimming is not allowed.
• Lamp is not suitable for use under dust and moisture.
• Lamp is not suitable for emergency operations.
• Do not stare at the operating light source.

Please inform yourself about the local waste disposal, separation and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose of your old product and packaging with your normal household waste. The correct disposal of the packaging, your product and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed of separately from the municipal waste stream via designated collection facilities. When disposing of a product that contains non-user- replaceable batteries, the non-user-replaceable batteries shall be removed by a professional.

© 2023Signify Holding
signify
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
www.philips.com/lighting
Made In China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>