iClever BTH20 ANC Noise Canceling Headphones User Manual

iClever BTH20 ANC Noise Canceling Headphones

INTRODUCTION

Wired  Headphones

Cat Ear Headphones

School Headphones

Package Content

Product Diagram

Power On/Off

1. Power On: In the power-off state, press and hold the MFB button for 3 seconds to power on the headphones. The headphones will play the voice prompt”Power on;and the indicator light will flash red and blue alternatively, indicating that the headphones have entered pairing mode.
2. Power Off: In the power-on state, press and hold the MFB button for 4 seconds to power off the headphones. The headphones will play the voice prompt”Power Off; and all lights will turn off, indicating that the headphones are powered off.

Bluetooth Pairing

1. When first turning on the device, its indicator light turns blue for 2 seconds, then the Bluetooth enters the pairing state, and the red and blue lights flash alternately.
2. Open the Bluetooth on your phone and select “iClever BTH20” in the device list for Bluetooth pairing.

Note:

1. After the second powe r-on, the phone will automatically reconnect to the last paired Bluetooth device. If the last paired Bluetooth device is out of range, the headphones will enter pairing mode.
2. If the device exceeds the effective Bluetooth range of the headphones it will automatically disconnect.
3. If the headphones fail to connect via Bluetooth for more than 5 minutes, it will shut down automatically.

Wired Connection

Insert the provided 3.5mm audio cable, with one end into the 3.5mm audio interface of the headphones and the other end into a device that supports a 3.5mm interface, such as a tablet, computer, laptop, or smartphone

Noise Reduction

When powering on the headphones, its noise reduction is off by default. Press the “ANC” noise reduction button once for “Low Noise Reduction” mode, twice for “High Noise Reduction” mode, and three times to turn off noise reduction.
Note: Noise reduction is not supported when using a wired connection.

Button Functions

• Volume Up:
  Press the”+” button

• Volume Down :
  Press the”-” button

• Next Track:
  Press and hold the volume+ button for 2s Previous Track:
  Press and hold the volume – button for 2s

• Play/Pause:
  Press the MF B button

• Answer/End Call:
  Press the MFB button

• Reject Call:
  Press and hold the MFB button for 2s

• Clear Pairing List:
  When the headphones are powered on (connected) or in the pairing state, press and hold the Volume+ Button & Volume – Button for 4 seconds. The headphones wlll automatically clear the pairing list and enter pairing mode, with the indicator light flashing red and blue alternate

Voice Prompt

• Power on: Power on
• Power off: Power off
• Pairing: Pairing
• Successful Bluetooth Connection: Connection Successful
• Bluetooth Disconnection: Disconnected
• Low Battery Reminder: Battery Low
• Low Noise Cancellation: Noise Cancelling Low
• High Noise Cancellation: Noise Cancelling High Turn off the Noise Cancellation: Noise Cancelling Off
• Maximum Volume: Maximum Volume Minimum Volume: Minimum Volume

Product Specifications

• Frequency Range: 2.402-2.48 GHz
• Maximum Transmission Power: 8 dBm
• Battery Type: Lithium Polymer Battery
• Battery Parameters: 3.7Vdc SOOmAh
• Charging Parameters: DC SV 1 A

How to Charge the Headphone

Connect the Type-C cable to the Type-C port on the headphones, and an SV power outlet (a power adapter is not included). The indicator light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.

Warnings

• Stop using the product if it is damaged.
• Replace the USB interface of the charging cable, if it becomes hot.
• Keep away the product from high temperatures and open flames.

Statements of Compliance

Product Model: BTH13,BTH18,BTH19,BTH21 Date Code: 20240101
Name and Address of manufacture: Thousandshores Deutschland GmbH, Bredowstraße 17, Hamburg 22113, DE
Name and Address of Authorised Representative: APEX CE  SPECIALISTS LIMITED, 89 Princess Street, Manchester, M14HT,UK
The statement of compliance is prepared by or on behalf of the manufacturer of the product.
In the opinion of the manufacturer, they have complied with either—i)the applicable security requirements in Schedule 1 of SI 2023 No. 1007
Provision 5.1-1 of ETSI EN 303 645 & provision 5.1-2 of ETSI EN 303 645;
Provision 5.2-1 of ETSI EN 303 645;
Provision 5.3-13 of ETSI EN 303 645.
The defined support period for the product: 20250101 signature, name, and function of the signatory:
The place and date of issue: The power delivered by the charger must be between min 0.0SWatts required by the radio equipment, and max 2 Watts to achieve the maximum charging speed.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

• (1) This device may not cause harmful interference.
• (2) This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC Caution

This device complies with Industry Canada licence­exempt RSS standard(s).
Operation is subject to the following two conditions:

• (1) This device may not cause interference, and
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Hereby, Thousandshores Deutsch land GmbH declares that the radio equipment type Wireless Headphones BTH20 complies with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://files.iClever.com /BTH20-eu-doc.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>