Baudcom STF8-10 Fiber Media Converter User Manual
- July 8, 2024
- Baudcom
Table of Contents
Baudcom STF8-10 Fiber Media Converter
Product Information
Specifications:
- Rate: 10/100Mbps or 10/100/1000Mbps
- Protocol supported: IEEE802.3/IEEE802.3U
- Fiber type: single/dual fiber
- Optic mode: single/multimode
- Transmission mode: half/full duplex
- Ethernet interface: RJ-45
- Optic interface: SC/FC/ST
- Optic wavelength: 850nm, 1310nm, 1550nm, Tx1310/Rx1550nm, Tx1550/Rx1310nm
- BER: < 1/1000000000
- MTBF: 3 years
- Power: 2.5W
- Power supply: AC220V/0.5A, DC-48 V /0.5A, DC5V/1A
- Working temperature: 0~50°C
- Working humidity: 5%-95%
- Storage temperature: -40~70°C
- Storage humidity: 5%~95% (no-condensing)
- Weight: 0.38KG
- Dimensions: 229x122x50mm for packing, 94×70.6×26.5mm for device
Product Usage Instructions
Installation:
Follow these steps to install the Fiber Media Converter:
- Ensure the power supply matches the device requirements.
- Connect the Ethernet cable to the RJ-45 port.
- Connect the fiber optic cable to the SC/FC/ST port.
- Power on the device.
Configuration:
To configure the Fiber Media Converter:
- Access the device configuration interface using a web browser.
- Enter the appropriate settings for your network requirements.
- Save and apply the configuration changes.
Maintenance:
Regular maintenance ensures optimal performance:
- Clean the fiber optic interfaces regularly to prevent dust buildup.
- Check for firmware updates on the manufacturer’s website periodically.
FAQ:
-
Q: What is the maximum transmission distance supported by the Fiber Media Converter?
A: The converter can extend the transmission distance up to 0.55 kilometers for multimode fiber and 120 kilometers for single-mode fiber. -
Q: Can the Fiber Media Converter work in both half-duplex and full-duplex modes?
A: Yes, the converter supports both half-duplex and full-duplex transmission modes based on network requirements. -
Q: How can I contact customer support for technical assistance?
A: You can reach out to SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD via their website, phone number, or email mentioned in the manual for technical support.
The Series is a kind of intelligent, adaptive and fast Ethernet converter devices. It can implement data transmission between twisted pair electrical signals and optical signals which are the two types of network connection media.This kind of media converter can extend the transmission distance to 0.55 kilometers(multimode) or 120 kilometers(single mode). Using media converter is an economical solution to achieve long distance transmission base on current status.
Features
- In conformity to IEEE802.3 10base-T, IEEE802.3u 100 base-TX/FX, IEEE802.3ab 1000 base-T, IEEE802.3Z 1000base-SX/LX, IEEE802.1a, IEEE802.1PQ0S, IEEE802.1d Spanning Tree.
- MDI/MDI-X Auto Negotiation
- Supports 2U 19” System Chassis, holds up to 14pcs standalone type media converter or 16pcs card-based media converter
- Hot Pluggable & Wall-Mountable
- Stable performance more than 50 thousands hours with fault-free
- Unique IC solution applied
- Supports 10/100Mbps and 10/100/1000M full/half duplex and auto-negotiations, easy upgrades
- Supports VLAN transmission
- Stable performance more than 50 thousands hours with fault-free
- In conformity with safety code of FCC, CE and RoHS.
Specification
| Rate | self-adaptive 10/100M or 10/100/1000M |
|---|---|
| Protocol supported | IEEE802.3/IEEE802.3U etc. |
| Fiber type | single/dual fiber |
| Optic mode | single/multimode |
| Transmission mode | half/full duplex |
| Ethernet interface | RJ-45 |
| Optic interface | SC/FC/ST |
| Optic wavelength | 850nm, 1310nm, 1550nm, Tx1310/Rx1550nm, Tx1550/Rx1310nm |
| BER | < 1/1000000000 |
| MTBF | 3 years |
| --- | --- |
| POWER | 2.5W |
| Power supply | AC220V/0.5A, DC-48 V /0.5A, DC5V/1A |
| Working temperature | 0~50℃ |
| Working humidity | 5%-95% |
| Storage temperature | -40℃~70℃ |
| Storage humidity | 5%~95%(no-condensing) |
| Weight | 0.38KG |
| Dimensions | 229x122x50mm for packing, 94×70.6×26.5mm for device |
Application
- Extend your Ethernet connection up to 0~120km away using fiber optics.
- Creates an economical Ethernet-fiber/copper-fiber link for connecting remote sub-networks to larger fiber optic networks/backbones.
- Converts Ethernet to fiber, fiber to copper/Ethernet, ensuring optimum network scalability for connecting two or more Ethernet network nodes (e.g. connecting two buildings on the same campus).
- Designed to provide high-speed bandwidth for demanding large-scale work groups that require expansion of Gigabit Ethernet Network.
System Design
- For Networking
- For CCTV Surveillance Security
Website: www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.com.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>