TZONE TT19 4G and 5G Real Time Temperature Humidity Light User Guide

TZONE TT19 4G and 5G Real Time Temperature Humidity Light

TT19/TT19EX Quick Setup Use Manual V1.1

Steps how to run the device easily

1. Step1: Register an account on the TZONE cloud platform.
   TZONE cloud platform Address： http://cloud.tzonedigital.com/
   

2. Step2: After registering an account, add the device ID to the account 
   Note: If the device you purchased already has a card and battery plugged, please ignoresteps3,4, and 5

3. Step3：After getting the machine, the user needs to insert the SIM card first, as shown in the figure below

4. Step4：Plug the battery, as shown in the figure below：

5. Step5：Install the shell and lock the screws.

6. Step6：Device on, short press the “START” button before turning on the machine. If the LCD displays “OFF”, it means the machine is turned off; At this time, press and hold the “START” buttonto turn on the machine, the “OK” light will be green, and the LCD will display the content, which means the machine is turned on, as shown in the figure below:

7. Step7: Install the device at the temperature monitoring site and send the data,if thesignal grid“ ” is displayed in the upper left corner of the device, it means that the machine has successfullysent data.

Step12: Query data.

1. Query method 1： 
2. Query method 2：
3. Query method 3：
   Enter the URL: http://cloud.tzonedigital.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>