TZONE TZ-WF501 WiFi Temperature Sensor User Manual

June 3, 2024
Tzone

TZONE - logo

WF501 WiFi Temperature Sensor
User Manual

TZ-WF501 WiFi Temperature Sensor

TZONE TZ-WF501 WiFi Temperature Sensor

Product Overview

TZ-WF501 is a WIFI temperature sensor based on IOT technology . It can be widely used in refrigerators, catering, warehouse and HACCP system industries and so on. It can real-time uploading data to cloud via WIFI . Users can remotely view, monitor, and manage data online via any web browser. At the same time, the device also with flash memory to storage 20,000 temperature recordings. And it can generate PDF report via the USB port. With a built-in rechargeable lithium backup battery that can provide real-time data uploading and alarm notifications continously even after power supply cut-off.
Product Application

  1. Freezer, refrigerator;
  2. Greenhouse ;
  3. Warehouse;
  4. Catering, food and HACCP system industries;
  5. Pharmacys, biochemical laboratory; etc

Product Features

  1. High sensitively and precision temperature probe;
  2. Keep running up to 30 hours after power supply cut-off;
  3. WiFi real-time data uploading
  4. 20,000 temperature recordings can be stored into device flash memory, and unlimited reccordings storage on cloud based platform
  5. Configurable alarm thresholds, uploading interval and temperature unit.
  6. Easily to generate PDF report via USB port.
  7. Equipped with LCD display screen, easily to check current temperature, alarm status, WIFI status and battery power ;
  8. Equipped with buzzer to alarm locally when the temperature exceeds the limit;

Product Specification

Project C II a ra cteristic
Power supply 5V/1A (DC)
Battery Built in 850mAh / 3.7V battery(rechargeable)
Sensor range -55°C to +125°C
Sensor accuracy ±0.3°C
Work environment -30°C to +60°C; 0% RH — 85% RH (non condensation)
Communication mode WiFi
Collection interval 1 minute to 60 minutes (configurable) 1 minute by default
WIFI Frequency band 2.
WIFI standard 802. 11b\g\n
Low voltage alarm Support, configurable
Temperature alarm Support, configurable
IP protection class IP54
Flash memory capacity 20,000 temperature recordings
Outline specification 106mm57mm33mm

Working Mode

Working mode Working condition
Normal mode The device collects the temperature data at the configured

acquisition interval and then enables the
| module to send the data.
---|---
Low voltage alarm mode| When the device voltage is lower than 3.55V (configurable), it will no longer send data, but store the data and send it after the device returns to normal.
Temperature alarm mode| When the ambient temperature exceeds the range set by the user, the transmitter will send data according to the set alarm interval (settable) to facilitate the customer to record the change of ambient temperature

Note: Priority: Temperature alarm mode > Low voltage alarm mode> Normal mode

LCD Display Description

In shutdown status, the device’s LCD turns off. In startup status, the LCD turns on and displays WiFi status,temperature alarm icon, operation status, temperature over limit
icon, , battery level and temperature value. TZONE TZ-WF501 WiFi Temperature
Sensor - fig

S.N Function Explanation
1 Temperature alarm icon Normal: √ Alarm: ×
2 Operation status ▷ Working status
3 Temperature over limit Upper limit exceeded: ↑
icon Lower limit exceeded: ↓

Both upper and lower limits exceeded: ↑↓
---|---|---
4| WiFi signal strength (RSSI value)| Very strong signal
Strong signal
Good signal
General signal
Poor signal
No display: not connected to WiFi
5| Battery level| Full battery
High battery
TZONE TZ-WF501 WiFi Temperature Sensor - icon 10Medium
Low
6| Temperature value| Unit: Celsius or Fahrenheit optional
Resolution: 0.1,
When the sensor is abnormal, LCD displays
——

Operating Instruction & Indicator status

7.1 On off operation and indicator status

Operation Operation method Indicator status Explana
Turn-on Press and hold the button for 3 seconds It lights green for 5
seconds Start working
Turn-off Press and hold the button for 3 seconds It lights red for 5
seconds Stop working

Note: Please ensure that the power button is turned to ON when switching on and off the machine.
7.2 To judge device current status by indicator
After startup, if you need to know the device current status, you can check the indicator status as shown in the table below. If the indicator does not work, it indicates that the device is in shutdown mode. When the device sends data, the indicator will flash once, green light standing for normal temperature and red light standing for abnormal temperature.
The device LED will flash quickly when generating the PDF report, after finished, the LED will li ght in green.The indicator status has priority. The larger the value is, the higher the priority is. The indicator status is as follows:

Device indicator (Green + Red)| |
---|---|---
Device status| LED light| Priorita
Network exception| Red light flashes quickly (on for 0.1s and off for 0.1s)| 1
Power supply disconnect| Red light flashes slowly (on for 1 s and off for 1 s)| 2
Temperature alarm| Red light is on always| 3
Normal state| The green light flashes once when sending data| 4

Alarm Mode
The user can use the configuration software to set the temperature range to enable the temperature alarm function. When the temperature exceeds the limit, the machine is in the alarm mode. In the alarm mode, the machine will immediately send an alarm data, and subsequently collect and send data according to the collection interval and transmission frequency set by the user. After the temperature returns to normal, the alarm mode will be released and the previous acquisition interval will be restored.
At the same time, the machine has the local buzzer alarm function in the alarm mode. If the buzzer function is enabled (it is enabled by default and always beeps), the machine will beep according to the set buzzer time.
How to close the buzzer:

  1. The temperature returns to normal;
  2. Background sends 037 downlink command
  3. The working time of the buzzer has expired;
  4. Press the button;

Note: The buzzer will not work again until the temperature is abnormal again (the temperature returns to normal first and then abnormal)
Platform Data Query
Temperature & humidity monitoring platform:
Query website:http://t.tzonedigital.cn/
After power on, configure wifi and other parameters with configuration software, and users can query data on the Tzone platform. To access the platform, you need to register a user first, and then add the IMEI of WF501 in the “Device Management” of the “Basic Settings”. After adding the IMEI, you need to wait for a period of time for the user to query the data after the machine has reported the data.
Note: By default, the machine sends data to the server once every one minute of collection interval. The customer can also press the button, and the machine will immediately send data. The steps to query data are as follows:TZONE TZ-WF501 WiFi Temperature Sensor - fig 1TZONE TZ-WF501 WiFi Temperature Sensor -
DeviceTZONE TZ-WF501 WiFi Temperature Sensor - fig
2TZONE TZ-WF501 WiFi Temperature Sensor - fig
3For more details, please click “help” button in the upper right corner of the platform![TZONE TZ-WF501 WiFi Temperature Sensor

PDF report data query
The machine supports the local PDF report function. The user only needs to connect the machine to the computer and use the configuration software to read the machine information, then click “Generate PDF” to generate the PDF report. The traffic light flashes during the generation process, and the traffic light is always on after the completion.
The PDF format is as follows:
DATA REPORT
File Information
ID: 323456789123456
File Created Date: 07/26/21 04:17:19
Note: An Trees shown are based on UTC+0:00 and 24-Hour clod( [MM/DD/YY HH:MM:SS3
Device Information

Device Type:  WF501 Fimware Version 1.00
 ID: 323456789123456

Logging Summary

 Fist Point: 07/26/21 02:49:36 Max:28.2t
Stop Tine: 07/26/21 04:16:21  Min: 26.3-C
Number of Points: 93 90 Average: 26.9t
Trip Length: COd 01h 26m 45s MKT: 26.9t

TZONE TZ-WF501 WiFi Temperature Sensor - fig 5TZONE TZ-WF501 WiFi Temperature Sensor - fig
6

Machine function configuration
The machine supports the configuration of relevant functions with our configuration software. Connect the machine to the computer and configure it after generating PDF files. For specific methods, please refer to the configuration tool documentation.
Client server connection
The machine supports docking with the client server. If the customer needs, please contact our sales personnel to obtain relevant agreements, SDK and other materials. TZONE - logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals