MACH-MATE 15LE-ESC Control Panel Enclosure User Manual

MACH-MATE 15LE-ESC Control Panel Enclosure

Product Information

Specifications

• Model: ES
• Screen: 15 Inch Touch/Non-Touch
• Resolution: 1024 x 768
• Display: On-screen display for Adjustments
• Input: VGA and DVI-D
• Power Supply: 12VDC
• Origin: Made in Japan

Product Usage Instructions

Mounting Instructions:

1. Ensure the enclosure is isolated before opening. Seek professional assistance if necessary.
2. Ground the equipment before mounting.
3. Mount the Main Control Panel at the desired location, with the option to mount the Mounting Post at the bottom of the panel.
4. Refer to the enclosure features for detailed mounting instructions.

Screen Usage:

1. The screen is a 15-inch touch/non-touch display with a resolution of 1024 x 768.
2. Use the On-Screen Display for adjustments to customize your viewing experience.
3. Connect graphics devices using the VGA and DVI-D inputs provided.
4. Power the screen using the included 12VDC power supply.

Panel Components:

• The front panel includes components like an ITX/Raspberry mounting plate, speaker mounting plate, fan mounting plate, etc.
• The rear panel components are essential for connectivity and functionality.
• Monitor control buttons are located on the side panel for easy access.

Assembly Instructions:

1. Assemble all components as per the provided guidelines.
2. Ensure proper alignment and attachment of all parts.

Frequently Asked Questions (FAQ)

• Q: Are all panel components included with Model ES?
  A: No, all panel components are not supplied with Model ES. Some components may need to be purchased separately for specific functionalities.

• Q: What is the origin of the product?
  A: The product is made in Japan, ensuring high quality and reliability.

SAFETY FIRST
DO NOT OPEN THE ENCLOSURE IF NOT ISOLATED SEEK PROFESSIONAL ASSISTANCE IF NECESSARY GROUNDING THE EQUIPMENT IS A MUST

MODEL SPECIFICATION

OVERALL

DIMENSIONS

(External dimensions excluding handles and mounting post)

WEIGHT – 10 kgs Approximate
(Excluding mounting post and all panel-mounted components)

BARE PANEL

1. Front panel
2. ITX/Raspberry mounting Plate
3. Speaker mounting plate
4. Fan mounting plate
5. Controller/SMPS mounting plate
6. Socket mounting plate
7. Rear cover

SCREEN SPECIFICATION

1. 15 Inch Touch/Non-Touch
2. 1024 x 768 Resolution
3. On-Screen Display for Adjustments
4. Includes VGA and DVI-D input for Graphics
5. 12VDC Power Supply
6. Made in Japan

FRONT PANEL COMPONENTS

1. Emergency Stop – 22.5mm Panel Hole
2. Volt & Amps Meter – 49mm Panel Hole x2
3. Push Button – 12mm Panel Hole x12
4. MPG SV – 44mm Panel Hole x1
5. Key Switch – 12mm Panel “D”Hole x1

REAR PANEL COMPONENTS

1. AC Socket with Switch & Fuse
2. GX16 Connector – 16mm Panel Hole x1
3. D825 – Male/Female Connector x2
4. GX16 Connector – 16mm Panel Hole x8
5. Ethernet Port RJ45 x1

SIDE PANEL MONITOR CONTROL BUTTONS

ENCLOSURE FEATURES

1. 15 Inch Touch / Non-Touch Screen Supplied
2. Keyboard and support plate supplied
3. Pre-drilled holes for ITX mounting plate supplied
4. Hard disk mounting plate supplied
5. Controller & SMPS mounting plate supplied
6. Speaker mounting plate supplied
7. Socket mounting plate supplied
8. Fan mounting plate supplied
9. Rear cover supplied
10. Stylus holder supplied
11. Pendant holding clamp supplied
12. Panel mount supplied
13. Full panel overlay stickers supplied as. CDR file (Requires printing by buyer)
14. Handles x2 supplied
15. All standard fasteners supplied
16. Panel mounting components supplied with 15LE-ESC
17. No wires supplied for internal wiring
18. No tools supplied for assembly
19. No power supply is supplied

ALL PANEL COMPONENTS ARE NOT SUPPLIED WITH MODEL ES

EXAMPLE ASSEMBLED PANEL

EXAMPLE ASSEMBLED PANEL – FRONT

EXAMPLE ASSEMBLED PANEL – BACK

EXAMPLE ASSEMBLED PANEL – REAR INTERNAL

EXAMPLE ASSEMBLED PANEL – OTHER VIEWS

EXAMPLE ASSEMBLED PANEL – PANEL MOUNT

DISCLAIMER

MACH-MATE does not assume any liability for the materials, information, and opinions provided on, or available through, this manual. No advice or information given by MACH-MATE or its employees shall create any warranty. Reliance on such advice, information, or the content of this manual is solely at your own risk, including without limitation any safety guidelines, resources, or precautions related to the installation, operation, maintenance, or repair of MACH-MATE control panel enclosure or any other information related to safety that may be available on or through this manual. MACH-MATE disclaims any liability for injury, death, or damages resulting from the use thereof.

For more info
Email – sales@mach-mate.com.

References

• Mate Precision Technologies - Superior Metalworking Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>