LPCB CSB-803 Resettable Call Point Installation Guide
- July 8, 2024
- LPCB
Table of Contents
LPCB CSB-803 Resettable Call Point
Features
- The default green color, it could be customized with other colors.
- Resettable design, obvious indicators around the edges of the unit.
- Press the pressing plate to enable the output function.
- Pressing plate with status shown.
- Reversionary key with non-slip design.
- Built-in buzzer status to set as a silent or continuous beep. Volume is adjustable.
- The input power range is DC12~24V. It can connect with all types of fire alarm systems.
- Easy to assemble, 3 sets of output points to connect other equipment embedded or surface installations to select.
Accessories
Specification
| Items | Specification | Note |
|---|---|---|
| Power supply | DC 12V-DC 24V | ±10% |
Operation current
| DC12V/20mA Standby/ 40mA Operation| ±10%
DC24V/20mA Standby/ 40mA Operation| ±10%
Buzzer| Set as silent or continuous beep|
Indicator
| Dual-color (red and green).
Red indicator to set blinking or on.
|
Output| Triple NO/NC/COM output|
Weight| 167g|
Dimensions| 90mm(L)x95mm(W)x45mm(H)|
Material| ABS, PC(transparent part)|
Standby
Operation
Connections
Wiring Diagram
Attention before installation
Please press the pressing plate to make sure the states turn red before
opening the front and middle covers to prevent the spring being popped out
Installation
Installations for user
Installation steps
- Unscrew the screws to remove the fasteners on B and C
- Fix bottom cover C and connect the wires
- Fastening the unit as in the diagram shown above locks the screw at the bottom
- Insert the key into the key hole Pull the key out when the states turn green to complete the setting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>