SILVER GEAR 2974 Body Scale with LCD Display Instruction Manual

: June 4, 2024
: SILVER GEAR

Table of Contents

Technical data
Features
Safety instructions
Description of parts
Operation
Disposal
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SILVER GEAR 2974 Body Scale with LCD Display Instruction Manual

Thank you for purchasing our body scale. This manual will provide directions for effective and safe use of the device. Please read it carefully before using this product. Store the manual in a safe place for future reference.

Technical data

Display	LCD 73x29mm
Product size	280x280x22mm
Weight capacity	0-180kg
Weight accuracy	0.05kg / 0.11 lb
Power	2x 1.5V AAA standard batteries (not included)

Features

Auto on/off function
Auto zero resetting
Weight units: kg-lb-st
Low-battery indication
Overload indication
Room temperature indicator

Safety instructions

Do not immerse the device in water.
Do not stand on the edge of the scale or jump on it.
Make sure your feet are dry before stepping on the scale.

Notice

Do not overload the scale (max 180kg / 4001b).
Do not drop the device or drop objects on it. This may damage the sensors.
Place the device on a hard, dry and flat surface.
For accurate measurements, gently step on the scale to wake it up and wait at least 10 seconds before weighing. Also wake up the scale to calibrate if it has been moved.
To ensure the most accurate results, measure each day at the same time.

Battery warnings

Only use 2x 1.5V AAA 1R3 standard batteries.
Do not mix old and new, and different types of batteries.
Insert batteries as directed, with regards to polarity (+ and -).
Remove batteries before long-term storage.
Batteries must be recycled or disposed of properly.
Regularly check the batteries’ condition to avoid damage.
Keep batteries away from direct sunlight, high temperatures, and high humidity.

Description of parts

LCD display
Tempered glass platform
Battery cover
Unit switch
High precision sensor

Operation

Inserting batteries

Gently remove the battery cover.
Insert 2x AAA standard batteries, with regards to polarity (+ and -).
Replace the battery cover.
Note: Incorrect polarity will have permanent impact on electronic parts.

Using the body scale

Place the scale on a hard, dry and flat surface.
Gently step onto the scale with dry feet and it will automatically turn on. Stand still for a accurate measurement. The display will lock and flash to indicate the final weight.
The scale will automatically switch off after approximately 8 seconds.

Unit conversion

You can choose between the metric (kg) and the imperial (lb) system. The unit switch is located on the bottom of the scale. When activated, press the unit switch to select the desired unit.

Error indication

The ‘Lo’ symbol on the display indicates that the battery power is running low. Please replace the batteries.

The ‘0l’ symbol indicates that the scale is over-loaded. Please step off to avoid possible damage to the device.

if the ‘Err’ symbol is shown as you step off the scale, it indicates that an error has occurred. Please step back onto the scale to weigh again.

Disposal

The crossed out wheelie bin symbol on this product is to remind you that electrical products should not be disposed of with household waste. Please dispose of it responsibly at an approved waste or recycling facility. Check with your local authority for recycling advice.

Used batteries may not be disposed of in the household waste. Consumers are legally obligated to dispose of batteries at a collection point in their community/city district or at a retail store. The purpose of this obligation is to ensure that batteries are disposed of in an environmentally congruent manner. Only dispose of batteries when they are fully discharged.

Dispose of all packaging materials in an environmentally friendly manner.

www.silvergear.eu