Shenzhen Xingyuansheng Electronic Technology X27 Portable Wireless Charger For Apple Watch User Manual
- June 6, 2024
- Shenzhen Xingyuansheng Electronic Technology
Table of Contents
Portable Wireless Charger
For Apple Watch
Product Diagram
Product Charging Instruction
Insert the charger into the computer or USB Devices, then it will start
Charging.
Charging the case:
The green light on: fully charged;
Greenlight flashes battery level 66%-99%;
Blue light flashes: battery level 33%-65%;
Red light flashes: battery level 0%-32%.
Instruction for charging the watch
Put the watch upon wireless charging area and press the power button to active
charging apple watch, press the power button Twice to stop charging. While
charging, the green indicator light is always on. Greenlight on: battery level
66%-100%;
Blue light on: battery level 33%-65%;
Red light on: battery level 10%-32%;
Red light flashes: battery level 0%-9%.When the battery power is 0%,
the red light flashes and stops charging.
(The product built-in auto-detect and recognize function) When pressing the
power button to start charging, it will auto stop charging after 30 seconds if
undetected watch, when the watch is fully charged or taken away without fully
charged, it will auto stop charging after 40 seconds.
Charging Drawing
Place the apple watch above the wireless area of the Wireless Watch charger and press the power button to start charging.
Product specifications
Suitable: Apple Watch
Capacity: 1400mAh
Input: DC 5V/1A
Output: 2.5W
Package Contents
Portable Wireless Charger For Apple Watch X1
Use Manual X1
Warnings
- Do not put metal foreign matters around the wireless charging area;
- Please do not disassemble the battery;
- Do not put the product in a moisture or water environment, and avoid severe falls;
- Please do not recharge in a high temperature;
- Do not put the product into fire or water;
- If it is found that the battery is bulging, leaking of odor, please stop using it immediately;
- If you do not use the product for a long time, charge the product at least once every five months.
FCC Warning Statement: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
Warning: In order to ensure the normal charging of the product, please place
the watch directly above the wireless charger. During normal charging, please
keep at least 20cm away from the human body.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This device complies with part 18 of the FCC Rules. Information to
the user.
- The device has potential interference, but the interference is very small and meets the requirements of the FCC rule
- Equipment system maintenance is simple, please refer to the manual
- The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.