AIPER S1N1PRO Robotic Pool Cleaner Instruction Manual
- July 8, 2024
- AIPER
Table of Contents
AIPER S1N1PRO Robotic Pool Cleaner
INSTRUCTION MANUAL
8. Maintenance
8.1 Replacing the tracks.
a. Remove the side cover plate from the device.
b. Remove the screws and the guide sleeves from the wheels.
c. Pull the wheels and the track together to remove them.
d. Align the gears on the new tracks with the gears on both wheels, then install the rear wheels and tracks together back onto the shaft sleeves.
e. Re-install the guide sleeves by aligning their D-shaped openings with that of the shaft sleeves.
f. Tighten the screws and re-install the side cover plate .
8.2 Replacing the roller brush belt.
a. Find the side that looks different from the other roller brush belts, and pull down the silicone buckles that are stuck in the fixed slot.
b. After all the silicone buckles are pulled out, replace the roller brush belt with a new one. Align the silicone buckles with the fixed slot and pull them outward. They can be fixed after passing through the slot.
8.3 Cleaning the drain.
a. Lift the top shell.
b. Remove the screws and drain cover.
c. Remove any objects entangled in the drains fan blades, and then re-install the drain cover and screws.
9. Storage
Winter Tips: How to store and secure your Aiper devices
How should I store my Aiper device during the off-season?
In your pool’s off-season, such as winter months or long vacations when your Ai per device won’t be used, there are a few steps to take to protect your device and keep it in the best condition possible.
1. Power off your device and disconnect it from the charger.
2. Clean the device of any residual dirt, including the top & bottom shell,
wheels, roller brushes, and charging port.
3. Using a paper towel or soft cloth, wipe dry your device.
4. Box and store your device in a cool, well-ventilated area.
5. Charge your device every TWO months to 40%-60% battery capacity to
maintain the battery health of your device.
When you’re ready to use your Aiper device in your pool, fully charge the device before using it in your pool, and never charge your device in direct sunlight.
10. LED Indecator Light
11. Packing List
12. Warranty
This product has passed quality control and safety test conductedm by our
technicians.
1. This product comes with a 24-month warranty that covers your item’s
battery and motor from the date of purchase.
2. This warranty is voided if the product has been altered, misused, or has
been repaired by unauthorized persons.
3. This warranty extends only to manufacturing defects and does not cover
damage resulting from the mishandling of the product by the owner.
4. The order number or record of purchase must be presented at the request of
any repair claim during the warranty period.
This symbol indicates that this product shall not be treated as household A waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>