INOGENI TOGGLE ROOMS XT 3 Host Switcher For USB HDMI Owner’s Manual
- July 7, 2024
- INOGENI
Table of Contents
INOGENI TOGGLE ROOMS XT 3 Host Switcher For USB HDMI
Specifications
- Product Name: TOGGLE ROOMS XT 3 HOST SWITCHER FOR USB/HDMI WITH AN EXTENSION
- Connectors: 3x USB 3.0, USB HDMI, HDMI display output, LAN interface, 2x USB 2.0, USB-C, HDMI share output from laptop
- Power Supply: 24V
- Extension: CAT6A up to 70m @ 4K30, 40m @ 4K60
- Hosts: Switch up to 6 peripherals between 3 hosts
- Cable: USB-C (100W)
- Resolution Support: 4K60 in 16:9, 5K30 in 21:9
Overview
The TOGGLE ROOMS XT is a 3-host switcher for USB/HDMI with an extension, allowing you to switch peripherals between 3 hosts seamlessly.
FAQ
How many hosts can be connected to the TOGGLE ROOMS XT?
The device supports connection of up to 3 hosts for seamless switching of
peripherals.
TOGGLE ROOMS XT
3 HOST SWITCHER FOR USB/HDMI WITH AN EXTENSION
DEVICE CONNECTORS
OVERVIEW
One USB-C cable (100W) to take control of your large room
4K BYOD/BYOM FOR LARGE ROOMS: 3 HOST SWITCHER FOR USB/HDMI WITH AN EXTENSION
Switch 6 peripherals between 3 hosts:
- Automatic or manual switching between Room PC hub and Laptop hub (3 hosts capable)
- Direct connection of 5x USB devices + 1 HDMI display
- Flexible laptop connectivity: USB-C (100W) or USB-B + HDMI
- 2 box system: At the display (Room PC hub) and at the table (Laptop hub)
- Connected with a single CAT6A cable
- Uncompressed video signal via HDBaseT proven technology
- Reach: 40 m/132 ft. at 4K60 and 70 m/230 ft. at 1080p
- 1 display: 4K60/16:9 and 5K30/21:9 widescreen (HDMI)
- Compatible by design: Crestron, Logitech, Lenovo, Poly, MAXHUB, Jabra, Teams, Zoom, etc.
- USB 3.2 Gen 1/USB 3.1 Gen 1, backward compatible with USB 3.0/2.0
- IP, RS-232 and GPI control
- Optional host switch button: Table surface-mounted button for BYOM laptop selection
- Made in Canada and TAA-compliant
WHAT IS IN THE BOX
- 1x TOGGLE ROOMS XT – ROOM PC device
- 1x TOGGLE ROOMS XT – LAPTOP device
- 1x USB-C to USB-C cable – 1.8 m/6 ft.
- 1x USB 3.0 cable (USB-A to USB-B) – 1m/3 ft.
- 3x terminal block 4-pos
- 4x mounting brackets
- 8x M2.5 mounting screws for brackets on product
- 8x screws for Toggle Rooms devices for table/wall mount
- 1x power supply 85-264VAC 50/60Hz to 24V/6.67A DC for a LAPTOP hub
- 1x power supply 85-264VAC 50/60Hz to 24V/1.5A DC for a ROOM PC hub
- 2x international adapters included in the box (USA/CA or EU/UK/AU/BIS)
- 1x Quick Start Guide/Thank You card
- 4x PSU mounting bracket
- 8x screws for PSU table/wall mount
- 8x rubber feet
HOW DOES IT WORK?
Switch up to 6 peripherals between 3 hosts (5 USB + 1 display):
This fl exibility extends across various settings, from huddle rooms to large
boardrooms, classrooms, and auditoriums, making it an ideal solution for unifi
ed videoconferences.
FEATURED CONNECTORS
ONE CABLE SOLUTION TO TAKE CONTROL
OF THE ROOM
- 1.8 m USB-C 100W cable included
- 10 m USB-C tested solutions
- 2x HDMI outputs: one for room display and one for content sharing
- 4K60/16:9 and 5K30/21:9 widescreen capable
DEVICE INTERFACES
3 application scenarios
SWITCH BYOD/BYOM with only one USB-C (100W) cable for a Room PC and laptop
TECHNICAL SPECIFICATIONS
Device confi guration via the INOGENI MAESTRO device controller
For technical support, contact us at support@inogeni.com
Copyright © 2024/06 INOGENI | All Rights Reserved. INOGENI name and logo are trademarks or registered trademarks of INOGENI. Use of this product is subject to the terms and conditions of the license and limited warranty in effect at the time of purchase. Product specifications can change without notice.
This sales sheet is constantly being updated. Please make sure that you have the latest version by regularly visiting inogeni.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>