VAULTEK VT20i, VT20 Bluetooth Smart Handgun Safe Instruction Manual

VAULTEK VT20i, VT20 Bluetooth Smart Handgun Safe

or visit www.vaulteksafe.com/support/20-series/

Thank You For Your Recent Purchase
At Vaultek® we stand behind our product and you our customer. On behalf of the entire team thank you for your purchase. We believe personal defense should be handled seriously and we’re excited for you to experience the ultimate performance in smart-security.
STAY SAFE. VAULTEK® SAFE.
For setup tutorials, and FAQs v1s1t www.vaulteksafe.com/support/20•series/

Vaultek® App!
The Vaultek” app is available for Android and iOS devices. The app allows you to remotely unlock safe. check battery level, toggle sound ON/OFF. adjust the interior light. plus much more. See pages 13 and 14 for more information.

Introduction

• The Vaultek® VT20i/VT20 is a tough and rugged Bluetooth® access safe. Its solid structure and penetration resistant design makes it ideal for storing valuables such as firearms, jewelry. cash and other personal items. Powered by a rechargeable lithium-ion battery. the safe combines high security with complete access control.
  Secure Access; How to open your Vaultek” Safe.

• Biometric: Personalized access for up to 20 unique fingerprints. See pages 08 to 11 for more information.

• Keypad: The numeric keypad responds quickly for rapid access and has a built-in proximity sensor that lights up when your hand brushes against the safe. See page 06 for more information.

• Vaultek® Bluetooth® App: Open the safe with the Bluetooth” app. See pages 13 and 14 for more information.

• Key: Two keys are provided for manual access to the safe in the event the battery dies.

• Secure Defense: How your Vaultek® Safe keeps people out.

• Anti-Impact Latches: Built to withstand forceful impacts and heavy slams.

• Unibody Construction: Our uni body design is extremely strong without welds or weak points.

• No External Access Points: A combination of interior mounted hinges and extended anti-pry reinforcement bars help prevent unwanted tools from attempting to break the safe open.

• Mounting Feature: Secure your safe to a stationary object via the included high strength steel security cable or via the two pre-drilled mounting holes using the included mounting hardware.

• Security Sleep Mode: Activates when six (6) consecutive incorrect keypad entries are entered
  or (6) incorrect fingerprint scans are made. The safe will not accept any entries for four minutes. If any additional attempts are made the alarm will beep. The security sleep mode can be cleared upon unlock of the safe by any authorized access method including the backup keys.

• Alert of Manual Unlock Activates when someone opens the safe with either the key or by picking the lock. the keypad will start flashing. By default this is toggled OFF. To enable reference the hot key section on page 12.

Warnings

• To prevent damage to your Vaultek” unit or injury to yourself or to others. read the following safety precautions before using this unit.
• DO NOT PLACE OR STORE THE BACKUP KEYS INSIDE THE SAFE AT ANY TIME. IF THE BATTERY FAILS. YOU WILL BE UNABLE TO OPEN THE SAFE.
• DO NOT expose to extreme heat or cold. Battery power may be affected.
• DO NOT store loaded guns in this unit. Firearms are serious in nature and must be handled with respect. Store responsibly.
• DO NOT get fingerprint sensor wet.
• ALWAYS check to make sure door has latched when closing; lid requires a firm press and locks automatically.

DISCLAIMERS :

• NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR UNAUTHORIZED ACCESS, ANY INJURY. LOSS OR DAMAGE TO PERSONAL PROPERTY DIRECT OR CONSEQUENTIAL. ARISING OUT OF THE USE OF. OR THE INABILITY TO USE THE VAULTEK® SAFE.
• THE USER SHALL DETERMINE THE SUITABILITY OF THE VAULTEK® SAFE BEFORE THE INTENDED USE AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH. VAULTEK” SAFES ARE NOT INTENDED TO PROTECT AGAINST ENVIRONMENTAL HAZARDS INCLUDING FIRE AND WATER.
• Be sure and follow all local and state firearm laws.
• DO NOT operate a firearm without proper training and experience.
• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG. Inc. and any use of such marks by Vaultek Safe, Inc. is under license.

Battery Operation

• Your safe uses a 3.7V 18650 rechargeable lithium-ion with a flat top. A minimum 2000 mAh capacity is required, however 2200 mAh or higher can be used to increase operation time. A high capacity battery upgrade is available as an accessory through our website.

Battery lnstallatlon

1. To get started, insert one of your backup keys into the keyhole at the front of the safe (see Figure A). Push key in and rotate the key 90 degrees clockwise to open the safe
2. Remove the interior padding. Locate the battery compartment door on the inside of the safe directly behind the ‘1’ key on the keypad (see Figure B).
3. Remove the battery cover by pressing down on the tab near the top of the cover. TIP! Before inserting the battery make sure to place the pull string over the battery before closing the door for easy removal.
4. Insert the battery (included in accessory box) into the battery compartment. Note that your Vaultek” safe automatically detects the polarity of the battery and can be installed in either direction. FIGURE B
5. When the battery is inserted you will hear a short welcome tone and the keypad will light up. Once you hear the tone and see the keypad light up, replace the battery cover. You are now ready to program your safe.

IMPORTANT Your Vaultek” safe will automatically lock when you fully close the lid.

Continue on next page for more information about the battery

Charging the Battery
Your Vaultek” safe is powered by a rechargeable lithium-ion battery and comes with a charging kit which includes an AC power adapter and a micro-USB cable. Safe and micro-USB cable can be used with all international power adapters. Under normal usage, a fully charged battery can last for months.

1. To recharge the safe, plug the micro-USB cable into the micro-USB receiving jack located on the upper right side of the safe (Figure C) and connect to a standard USB port or wall outlet using the AC power adapter. Approximate recharge time is 2.5 hours.
2. When charging the LED light above the micro-USS jack (Figure C) will be solid RED and GREEN indicating charged.

Charging TIPS

• After installing the battery, use the charging kit provided to charge the unit 100%.
• The charging kit can also function as an external power supply, which means you can open your safe even when the battery is depleted.
• Leaving your safe plugged in continually will not harm the safe or battery. However, to preserve battery life we suggest that you unplug occasionally to allow the battery to cycle down.
• A specially designed Vaultek Powerpack is available as a separate accessory to extend operation time.
• The adapter used to charge the battery should output 5V/2000mA or above when using micro-USS cable. See the next page for additional information about the battery.

Battery Maintenance

Testing: the Battery Power
To check the battery level, press and hold the ‘5’ key on the keypad for 3 seconds. The keys ‘1’ to ‘4’ will glow GREEN or RED to indicate the battery level:

• Remaining Battery Capacity Level
• If 4 keys glow green: 80%-100%
• If 3 keys glow green: 60%-80%
• If 2 keys glow green: 40%-60%
• If 1 key glows green: 20%-40%
• If 1 key glows red: 10%-20%
• If 1 key blinks red: less than 10%

Low Battery
If the ‘1’ key on the keypad blinks RED several times and you hear several rapid beeps when opening the safe. your battery level is critically low and your safe needs to be charged immediately.

Soft Reset TIP
In the event the battery dies or a soft reset is performed (battery removal and installation) the safe will restore default settings for interior light, sound, and Alert of Manual Unlock feature. These settings will need to be readjusted. however the master code and fingerprint scanner will not be affected.
IMPORTANT

• Use a 3.7V 18650 rechargeable lithium-ion battery with a flat top. A minimum 2000 mAh capacity is required. however 2200 mAh or higher can be used to increase operation time.

• A high capacity battery upgrade is available as an accessory through our website.

• The adapter used to charge the battery should output 5V/2000mA or above when using micro-USB.

• Master Code Programming
  First time users should change the default code as soon as possible to prevent unauthorized access to your safe. You will also use this master code to pair the Vaultek” app on your smartphone. so it should be kept confidential.

• TIP : Code Requirements

• Your code can be a minimum of 4 and a maximum of 8 digits. We recommend a code 6 to 8 digits in length using at least one of each key to make it more difficult for someone to guess your code. For your security. the safe will time out and sleep for 4 minutes if 6 incorrect entries are made.

• Two keys cannot be pressed simultaneously.

• Programming a new code will overwrite your previous code.

TIP! The Vaultek® app will ask for your safe master code during pairing and anytime you change the code the app will ask you to re-enter it.

1. Open the safe. With the safe open. press and hold the “PROGRAM” button (3 seconds) (Figure D) until all keys (1-5) light up RED and let go.
2. Enter your NEW master code.
3. IMMEDIATELY Press and hold the “PROGRAM” button a second time (3 seconds) until all keys (1-5) light up RED and let go.
4. Enter your NEW master code a second time.
5. IMMEDIATELY Press and hold the “PROGRAM” button a third time (3 seconds) until the safe beeps and let go. This tone confirms that the password has been reset. Now test the code.
   If you make a mistake and the new code will not work. simply start over with step 1.

Product Registration
Vaultek” strongly encourages you to register your safe as soon as you receive it. Registration provides many benefits including three year warranty, technical support, and ordering replacement keys should you misplace them. Your Vaultek” safe has a unique product number on the inside of the battery door and a 4-digit ID number engraved on the keys. You will need these numbers to register your safe.

1. Locate your product number. It is printed on the first page of this user manual and on the back of the battery door (Figure E/F}.
2. Find your 4-digit ID number engraved on the keys (Figure G).
3. Please visit the Vaultek” website at vaulteksafe.com and click Support/Product Registration.
4. Enter the required information in the form and click submit.

Biometric Scanner (VT201 Only)

• Biometrics are methods of authenticating the identity of a person based on physical or behavioral characteristics. Biometric fingerprint authentication refers to technology that measures and analyzes human physical characteristics for identification and authentication purposes.
• Everyone has their own unique fingerprints. and what makes them unique is the pattern of ridges. valleys. and minutiae points that comprise an individual print. Vaultek” and their leading engineering group has developed proprietary technology to read and match fingerprints with unmatched speed and accuracy. That means that only authorized users have access to your valuables. The safe is capable of storing fingerprint data for up to 20 unique authorized users. A user consists of 5 scans of the same finger during registration. Once a user’s fingerprint data is stored in the safe and encrypted. it cannot be copied or stolen.

Helpful Programming TIPS

• Place the core of the fingerprint flat (Figure H+I} over the center of the scanner (this allows the scanner to read where most of the fingerprint detail is located) see (Figure H).
• Adjust your finger slightly between scans for increased accuracy.
• Excessive moisture. lotions. or dirt will affect your fingerprint and may cause inaccurate sensor reading.
  • If you are having difficulty with your print. program the same fingerprint 4 or S times. You have 20 slots available for programming and you can also try your thumb as it has more surface area to read.

ATTENTION! (Figure I)
Position your finger flat against the scanner to increase the amount of readable information.

Biometric Scanner (VT2oi Only)
Programming the 1st and 2nd Fingerprints
The 1st and 2nd fingerprints will be recognized as administrative fingerprints and will be used to authorize additional users. To program additional users please refer to the next page.

1. Open the safe. Program 1st fingerprint by quickly pressing and releasing the “PROGRAM” button (Figure J). The ring around the fingerprint scanner (Figure K) will turn RED and the ‘l’ key on the keypad will blink RED.
2. Using the helpful programming tips provided on page 08 place your finger on the fingerprint scanner for the first of 5 scans. When the safe beeps and the ‘1’ key lights up GREEN remove your finger.
3. Place finger again over the scanner until the safe beeps and the number 2 lights up GREEN and lift. You will repeat this process until keys (1-5) are solid GREEN.
4. Close lid and test to see if the safe will open using your fingerprint. If you experience issues refer to the helpful programming tips listed on page 08 or check our tutorials on line at vaulteksafe.com.
5. Repeat steps 1 through 4 to add the 2nd administrative fingerprint.
   Continue on next page to program fingerprints 3-20.

Programming Additional Fingerprints

The first two fingerprints programmed into the safe are the administrative fingerprints. Any additional users programmed require authorization from one of these fingerprints.

1. Open the safe. Program additional fingerprints by quickly pressing and releasing the “PROGRAM” button (Figure J on page 09). The ring around the fingerprint scanner (Figure K on page 09) will turn RED and the keypad will flash RED prompting you to scan one of the administrative fingerprints.

2. Place one of the first two programmed administrative fingerprints on the scanner and remove when the safe beeps. keypad flashes GREEN. and the ring around the fingerprint scanner flashes GREEN. When the ‘1’ key on the keypad starts blinking RED you can program a NEW fingerprint.
   TIP! If the administrative print is left on the scanner too long the safe will begin to program that fingerprint into the safe again and not the NEW fingerprint. If this happens start over with step one.

3. Using the helpful programming tips provided on page 08 place the NEW finger on the scanner. When the safe beeps and the ‘l’ key lights up GREEN remove your finger.

4. Place finger again over the scanner until the safe beeps and the number 2 lights up GREEN and lift. You will repeat this process until all keys (1-5) are solid GREEN.

Biometric Scanner (VT2oi Only)
Deleting Fingerprints
Individual fingerprints can not be deleted from the keypad on the safe. Following this procedure will erase all of the fingerprints including both administrative fingerprints. If you wish to delete individual fingerprints. you must use the Vaultek” app. This procedure will not affect the keypad master code.

1. Press and hold keys ‘3’ and ‘5’ at the same time until all the keys (1-5) light up RED and let go.
2. Enter your master code on the keypad . If the code is correct. all the numbers on the keypad will blink GREEN and beep indicating deletion of all the fingerprints.

Hot keys

• Tamper Detection

• Press and hold ‘2’ and ‘4’

  • To check for tampering press and hold keys ‘2’ and ‘4’ together for 3 seconds. The ‘3’ key will glow RED to indicate tampering or GREEN to indicate no tampering. You can reset the tamper detection by opening the safe through one of the authorized entry points.

• Toggle Stealth Mode

• Press and hold ‘1’ and ‘3’

  • toggle the sound ON/OFF press and hold keys ‘1’ and ‘3’ together for 3 seconds. If the ‘2’ key glows GREEN. the sound is ON; if the ‘2’ key glows RED. the sound is OFF

• Toggle Travel Mode

• Press and hold ‘l’. ‘3’ and ‘5’

  • Save battery life by disabling the proximity sensor, fingerprint sensor, keypad. and  Bluetooth features. To toggle travel mode ON/OFF press and hold keys ‘1’ ‘3’ and ‘5’ together until the safe beeps and the keys light up. If the keys glow RED and beeps, the safe is disabled; if the keys glow GREEN and beeps, the safe is operational.

• View Battery Status Press and hold ‘5’

• To check the battery level press and hold the ‘5’ key on the keypad (3 seconds). Keys from ‘1’ to ‘4’ will glow GREEN or RED to indicate the battery level. See pages 04 to 05 for more information.

  • If 4 keys glow green: 80%-100%
  • If 3 keys glow green: 60%-80%
  • If 2 keys glow green: 40% – 60%
  • If 1 key glows green: 20%-40%
  • If 1 key glows red: 10%-20%
    If 1 key blinks red: less than 10%

• Delete Fingerprints Press and hold ‘3’ and ‘5’ then enter the master code.

  • To delete fingerprints press and hold keys ‘3’ and ‘5’ at the same time for 3 seconds until all keys (1-5) light up RED then enter your master code. This will remove all the fingerprints. You can delete individual fingerprints in the Vaultek” app.

• Toggle Interior Light ON/OFF

• Press and hold ‘1’

  • To toggle the interior light ON/OFF press and hold the ‘1’ key for 3 seconds. With the light toggled to ON you can press the “LIGHT” button inside the safe to illuminate the light and can also adjust the interior light in the app. If the light is toggled OFF the light will be disabled.

• Toggle Bluetooth

• ON/OFF Press and hold ‘2’ and ‘5’ then enter the master code.

  • To toggle the Bluetooth ON/OFF press and hold keys ‘2’ and ‘5’ at the same time for 3 seconds. Keys ‘3’ and ‘4’ will glow RED indicating Bluetooth is oft. To turn Bluetooth back on again. press and hold keys ‘2’ and ‘5’ at the same time for 3 seconds until all keys (1-5) light up RED. then input your safe’s master code. Keys ‘3’ and ‘4’ will glow GREEN to confirm Bluetooth is enabled. With the Bluetooth toggled ON you can perform various functions on the app. If the Bluetooth is toggled OFF all app functions will be disabled and your safe is undiscoverable.

• Toggle Alert of Manual Unlock
  Press and hold ‘3’ then “DROGRAM”

  • If the Alert of Unlock is on, and someone opens the safe with either the key or by picking the lock, the keypad will start flashing. To toggle Alert Unlock press and hold the ‘3’ key then “PROGRAM” button together for 3 seconds. The keypad will flash GREEN indicating enabled or RED indicating disabled. If ON and activated it can only be cleared by entering master code. Default is OFF.

Vaultek® App Features

The Vaultek” app lets you get the most out of your safe. Using the app gives you access and control over features that are not possible using the keypad interface alone.
App Features

• Unlock Safe Within Range (Optional) I Check Battery Levels
  Toggle Sound On/Off I Adjust Interior Light

• Manage Fingerprint IDs I View History Log

Helpful TIPS

• History Log Timestamp Any actions recorded in the history log before your phone is paired with the safe will show a timestamp from the safe’s default clock – this may not match  your phone’s time or date. To sync your phone’s time with the safe’s history log. simply remove the battery and reinstall and immediately re-sync your phone before performing any other actions.
• Remote Unlock By default, the unlock feature on your app will be disabled. If you wish to enable this feature, press and hold keys ‘1’ and ‘4’ followed by the PROGRAM button together for 3 seconds. Repeat the sequence to disable the unlock feature.
• Privacy Notice
  • Vaultek Safe, Inc. does not access your personal information. The app may require some permissions to store personal preferences such as your safe settings and Bluetooth settings to communicate with your safe. In no way do we gain or collect any personal information from you.

Vaultek® App Pairing

1. Get the App Download the Vaultek” Bluetooth app from the Google Play store or Apple store.

2. Make sure your phone’s Bluetooth settings are set to ON, and open the Vaultek? app to begin.
   IMPORTANT You must be within Bluetooth range to pair your phone with your safe. The approximate range is 25 feet.

3. Create a Pattern Lock This is an added layer of protection to safeguard your safe and prevent unauthorized access in the event your phone is misplaced. To create your pattern lock, simply drag your finger along the screen to connect at least four dots. This unique pattern will be required each time you open the app.

4. Select Your Safe After a few seconds your safe will appear in the search. You can drag the screen downwards to refresh if you are not seeing your safe listed. Select your safe. and enter your safe’s master code when prompted. This is the same code used to open the safe using the numeric keypad.

   • IMPORTANT If you change your safe’s master code after pairing. the safe will no longer connect to your app, and you will be prompted to enter the new code when needed.
   • IMPORTANT As a security measure, if too many incorrect master code entries are entered, your safe’s Bluetooth will disable and must be toggled ON again using the hot key sequence.

5. Sync Your Phone Press and hold keys ‘4’ and ‘5’ on your safe followed by the PROGRAM button together for 3 seconds to start the syncing protocol. When the keypad starts blinking red you can finalize the pairing sequence from your app screen by pressing ‘OK’. The safe’s keypad will flash green and beep when complete. if the keypad flashes red with two beeps you will need start over with step 4.

   • TIP This pairing sequence offers enhanced security protection and can only be used to pair one phone to your safe. If the process is repeated with a different phone, the previous phone will be overridden and disconnected from the safe.
   • Remote Unlock Refer to page 13 on how to enable this feature

Securing Your Safe

You oute at to be secure few ten my die a city able to teh you ate to lager

Using the Security Cable

1. Loop the security cable around a secured object.
2. Run the end of the cable through the eye of the other end and pull tight around the object.
3. Place the end of the security cable inside the fully enclosed quick release cable mount inside your Vaultek® safe as shown in (Figure L).
4. Make sure the safe closes with the cable secured inside the quick release cable mount.

Using the Mounting Screws
TIP : Make sure you have enough clearance for the lid to open properly before mounting the safe.

1. Position the safe on a flat surface where you want to mount it.
2. Use a pencil to mark the holes for drilling.
3. Drill pilot holes.
4. Position safe in place and install screws through safe into pilot holes. Tighten screws.

Customer Support / Warranty

• Customer Support If you have a problem with your Vaultek® safe that is not answered in the FAQ section of this manual, we encourage you to visit
  www.vaulteksafe.com/10series-support or www.vaulteksafe.com/20series-support.

• Limited Warranty (Terms and Conditions) VAULTEK® IS COMMITTED TO PROVIDING PRODUCTS OF HIGH QUALITY AND VALUE AND MAKES EVERY EFFORT TO ENSURE ITS PRODUCTS ARE FREE OF DEFECTS. Vaultek® guarantees your safe will be free of defects in materials or workmanship for a period of two years from the date of original purchase from an authorized dealer and three years with verified product registration. The warranty is only valid for the original purchaser and not transferable. This warranty is only valid for products purchased and operated in the U.S. This warranty does not cover abuse, misuse, use in any manner for which is not designed, neglected, modification, damage inadvertently caused by the user, accidents and/or tampering.

• If service is needed Vaultek will, at its option, exchange or repair without charge for parts or labor. Upon authorization of warranty service, customers are responsible for securely packaging product. Additionally, customers are responsible for costs of shipping to and from Vaultek service center.

• If the claimed defect cannot be identified or reproduced, customers will be held responsible for the costs incurred.

• Please have the following information available before you begin a claim with Vaultek:

  • Purchaser’s name, mailing address, email address, and a phone number.
  • Copy of receipt or online order number (if purchased directly from us or Amazon)
  • Authorized Dealer Name (if applicable)
  • Detailed description of the problem NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING

• OUT OF THE USE OF, OR THE INABILITY TO USE THE VAULTEK® SAFE.

FCC

This device has been evaluated to meet general RF exposure requirement, and this device can be used in portable exposure condition without restriction. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Due to the used enclosure material, the product shall only be connected to a USB Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment.

• The suitable temperature for the product and accessories is 0º-40°.
• CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING THE INSTRUCTIONS. The adapter shall be installed near the equipment and shall be easily accessible.
• EU Regulatory Conformance Hereby, Vaultek Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site https://vaulteksafe.com.

37 North Orange Ave. Suite 800B Orlando, FL 32801 VAULTEKSAFE.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>