VAULTEK NVTi VT Series Full Size Rugged Smart Safe Locker Instruction Manual
- June 5, 2024
- VAULTEK
Table of Contents
QUICK SETUP! PAR SCAN CODE
NVTi VT
Instruction Manual
or visit www.vaulteksafe.com/support/vt-series/
Thank You
At Vaultek° we stand behind our product and you our customer. On behalf of the
entire team thank you for your purchase. We believe personal defense should be
handled seriously and we’re excited for you to experience the ultimate
performance in smart security.
This safe has been granted two United States Patents. An exterior design
patent as well as a patent for Vaultek’s signature two-point latch system. US
Patent Numbers: US D817,589 S I US 10,253,529
Access Quick Setup, Tutorials, and Troubleshooting online using the code
on the right. Simply scan the code with your phone’s camera or visit
www.vaulteksafe.com/support/vt-series/ and select your model.
Need help? Please email our support team at
support@vaulteksafe.com.
Stop! Do not return to the retailer. If you have any questions about your
Vaultek° safe or need help configuring the system, please visit
www.vaulteksafe.com/support/vt-eries/.
VauttekoCustomer Support:
support@vaulteksafe.com
Register your product online using the code on the right. Simply scan the code with your phone’s camera or visit www.vaulteksafe.com, click Support then Product Registration. Enter the required information in the form and click submit. Registration provides many benefits including a three-year warranty, technical support, and ordering replacement keys should you misplace them.
Get to Know Your Vaultek® Safe
The Vaulteke NVTi/NVT is a tough and rugged, quick access, Wi-Fie enabled smart safe. Its solid structure and penetration-resistant design make it ideal for storing valuables such as firearms, jewelry, cash, and other personal items. Powered by a rechargeable lithium-ion battery, the safe combines high security with complete access control.
01. Biometric Scanner (VTi Only)
02. Silicone Keyhole Cover
03. Micro-USB Charging Port
04. LED Status Bar
05. Pre-Drilled Holes| 06. Battery Compartment Door
07. PROGRAM Button (Located Beneath Protective Cover)
08. LED Light Button
09. LED Light
---|---
Box Contents
Vaultek0 Safe
Nano Key
18650 Rechargeable Lithium-ion Battery
AC Power Adapter and Charging Cable| High Strength Steel Security Cable
Hardware Mounting Kit
Owner’s Manual / Quick Start Guide
Backup Keys (2)
---|---
Basic Operation:
Unlocking
Keypad: The numeric keypad responds quickly for rapid access and has a
built-in proximity sensor that Lights up when your hand brushes against the
safe. See page 08 for more information.
Nano Key: Remote for On-Demand access. See pages 13 and 16 for more
information.
Key: Two keys are provided for manual access to the safe in the event the
battery dies.
Biometric Scanner (Biometric Model Only): Personalized access for up to
20 unique fingerprints. See pages 09 to 12 for more information.
How your Vaultek® Safe Keeps People Out
Anti-Impact Latches: Built to withstand forceful impacts and heavy
slams. No External Access Points: A combination of interior mounted hinges and
extended anti-pry reinforcement bars help prevent unwanted tools from
attempting to break the safe open.
Security Sleep Mode: Activates when six (6) consecutive incorrect keypad
entries are entered or (6) incorrect fingerprint scans are made. The safe will
not accept any entries for four minutes. If any additional attempts are made
the alarm will beep. Security sleep mode can be cleared upon unlock of the
safe by any authorized access method including the backup keys.
Impact Detection (DMT): Motion-activated alarm can be disabled or enabled
with three levels of sensitivity (Low, Medium, and High) using the Vaultele
app or hotkey functions. See page 18 for information.
Alert Notifications: Wi-Fis connectivity allows you to receive alerts
such as push notifications and text alerts during critical safe activity. This
includes battery levels, impacts, extreme temperatures, tampering, and anytime
the safe is opened.
Warnings
To prevent damage to your Vaultek° unit or injury to yourself or to others, read the following safety precautions before using this unit.
DO NOT PLACE OR STORE THE BACKUP KEYS INSIDE THE SAFE AT ANY TIME. IF THE BATTERY FAILS, YOU WILL BE UNABLE TO OPEN THE SAFE.
DO NOT PLACE OR STORE THE BACKUP KEYS INSIDE THE SAFE AT ANY TIME. IF THE
BATTERY FAILS, YOU WILL BE UNABLE TO OPEN THE SAFE.
DO NOT expose to extreme heat or cold. Battery power may be affected.
DO NOT store loaded guns in this unit. Firearms are serious in nature and
must be handled with respect Store responsibly.
DO NOT get the fingerprint sensor wet.
ALWAYS check to make sure the door has latched when closing; the door
requires a firm press and locks automatically.
Be sure and follow all local and state firearm laws.
DO NOT operate a firearm without proper training and experience.
Disclaimers:
NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR UNAUTHORIZED ACCESS, ANY
INJURY, LOSS, OR DAMAGE TO PERSONAL PROPERTY DIRECT OR CONSEQUENTIAL ARISING
OUT OF THE USE OF, OR THE INABILITY TO USE THE VAULTEK° SAFE.
THE USER SHALL DETERMINE THE SUITABILITY OF THE VAULTEK° SAFE BEFORE THE
INTENDED USE AND THE USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN
CONNECTION THEREWITH. VAULTEK® SAFES ARE NOT INTENDED TO PROTECT AGAINST
ENVIRONMENTAL HAZARDS INCLUDING FIRE AND WATER.
Be sure and follow all local and state firearm laws.
DO NOT operate a firearm without proper training and experience.
Check pages 14 and 16 for Nano Key warnings.
Wi-FP is a registered trademark of Wi-Fi Alliance°.
Battery:
Installation
Your safe uses a 3.7V 18650 rechargeable lithium-ion with a fiat top. A minimum 2000 mAh capacity is required, however, 2200 mAh or higher can be used to increase operation time.
-
To get started, insert one of your backup keys into the keyhole at the front of the safe (see Figure A). Push the key in and rotate the key clockwise to open the safe.
-
Remove the interior padding. Locate the battery compartment door on the inside of the safe directly behind the ‘4’ key on the keypad (see Figure B).
-
Remove the battery cover by pressing down on the tab near the top of the cover.
Tip! Before inserting the battery make sure to place the pull string over the battery before closing the door for easy removal. -
Insert the battery (included in the accessory box) into the battery compartment. Note that your Vaulteko safe automatically detects the polarity of the battery and can be installed in either direction.
-
When the battery is inserted you will hear a short welcome tone and the keypad will light up. Once you hear the tone and see the keypad light up, replace the battery cover. You are now ready to program your safe.
IMPORTANT! Your Vaultek® safe will automatically lock when you fully
close the lid.
IMPORTANT! First-time users should change the default code immediately
after installing the battery to prevent unauthorized access to your safe.
Tip! Register your safety online. This is important in the event you lose
your keys. See page 20. Battery:
Maintenance
Your Vaulteke safe is powered by a rechargeable lithium-ion battery and comes
with a charging kit that includes an AC power adapter and a micro-USB cable.
Safe and micro-USB cable can be used with all international power adapters.
Under normal usage, a fully charged battery can last about 3 months.
Battery Maintenance: Charging the Battery
- To recharge the safe, plug the micro-USB cable into the micro-USB receiving jack located on the right side of the safe (Figure C) and connect to a standard USB port or wall outlet using the AC power adapter. The approximate recharge time is 2.5 hours.
- The LED on the side of the safe (Figure C) will glow RED indicating charging or GREEN indicating that charging is complete.
Battery Maintenance: Charging Tips!
- After installing the battery, use the charging kit provided to charge the unit 100%.
- The charging kit can also function as an external power supply, which means you can open your safe even when the battery is depleted.
- Leaving your safe plugged in continually will not harm the safety or battery. However, to preserve battery life we suggest that you unplug occasionally to allow the battery to cycle down.
- A specially designed Vaultek® powerpack is available as a separate accessory to extend operation time.
- The adapter used to charge the battery should output 5V/2000mA or above when using a micro-USB cable. See the next page for additional information about the battery.
For setup, tutorials, and FAQs visit
www.vaulteksafe.com/supportivt-series/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>