eeese 2512 Air Cooler Lea User Manual

eeese 2512 Air Cooler Lea

Product Information

The eeese Air Cooler Lea is designed to filter harmful micro-substances from the air, add moisture to dry air, and offer a variety of airflow options to meet different needs.

Specifications:

• Product: Air Cooler Lea
• Model: Art. 2512
• Email: info@eeese-aircare.com
• Website: eeese-aircare.com

Features:

• Filtering: Removes dust, fibers, and other micro-substances from the air.
• Evaporation: Adds moisture to dry air for skin and eye health.
• Airflow Selection: 8 airflow options available.
• Airflow Types: Choose between Smooth, Varied, and Night modes.
• Airflow Direction: Oscillates to blow air over a 120-degree radius.

Product Usage Instructions

Unpacking and Setup:
Unpack the unit and ensure the instruction manual, remote control, and wheels are included. Place the unit on a flat, horizontal surface without tilting it during operation.

Power Supply Check:
Check the power supply to ensure it meets the air cooler’s parameters before operation.

Frequently Asked Questions (FAQ):

• Q: How often should I clean the filters?
  A: It is recommended to clean the filters every 2-4 weeks depending on usage to maintain optimal performance.

• Q: Can I use essential oils with the air cooler?
  A: No, it is not recommended to use essential oils with the air cooler as it may damage the unit.

Thank you for choosing the eeese Air Cooler Lea. To get an in-depth understanding of our product and to ensure that it is used properly, please read this manual carefully before using it, in particular the information marked with Warning and Caution.

OVERVIEW

1. Air intake/Filter
2. Water container
3. Wheels
4. Handle
5. Control panel
6. Air exhaust

Introduction

Cooling
Cooling with the Lea is a perfectly natural and affordable cooling method with low energy requirements. The device produces moist cool air by using the evaporative cooling principle. The hot room air is cooled by being sucked through an absorbent filter that is soaked with water. The Lea is best suited for smaller spaces where doors and windows are wanted to be kept open. In the humid northern regions, the unit’s exhaust air will likely be cooled by between 3 and 5 degrees, depending on the temperature and humidity of the intake air. Therefore, the Lea is unable to cool a room from 30°C to 23°C, but the less the humidity, the more the Lea can cool a room. There is no water discharge as in the case of mobile air conditioning units, neither is hot air discharged through a window, a door or a hole in the wall. It makes Lea flexible and easy to handle. Fill the tank with water, connect it to a power source and press ON. The evaporator is in accordance with international standards for environmental protection

Filtering
This device filters out harmful micro-substances such as dust, fibers and the like from the air.

Evaporation
The Lea will add moisture to dry air and maintain a healthy moisture balance in indoor living areas for the benefit of the skin and eyes.

Airflow selection
The unit has 8 airflow options that meet a wide range of needs.

Choice of airflow type
Choose between three types of airflow modes: Smooth which gives off a constant breeze, Varied, which simulates a natural breeze and Night, which is a muted version of the Varied mode.

Airflow direction
By automatically oscillating, this unit can blow out air over a radius of 120 degrees.

Preparation and operation

Unpack the unit and make sure that the instruction manual, remote control and wheels are enclosed.
The unit must be placed on a horizontal surface. The unit must not be tilted when it is in operation.
Check the power supply and ensure that it is in accordance with the parameters of the air cooler.

Filling with water
If the unit is new or has not been in use in the cooling mode for a long period of time, it will be necessary to fill it up with clean water before use. The power supply must be disconnected before filling with water, in order to prevent damage to the electrical parts. Fill the tank with water up to the maximum – not over, as the water may overflow.

Fitting the wheels

The wheels without brakes must be fitted at the front and the wheels with brakes must be fitted at the rear.

Storage
If the unit will not be used for a long period of time, the water tank must be emptied and cleaned. Allow the device to blow at the normal temperature for a while, in order to dry the system. In particular, the filter should be completely dry. We recommend that the unit is kept in its original packaging.

Cleaning

The evaporator and the static filter may become clogged with dust or dirt. This will affect the air volume and the cooling system. It is recommended that it is cleaned at least every second week. The cleaning procedure is as follows:

• Disconnect the power supply.
• Loosen the filter screen tabs at the top and remove the filter screen and the evaporator grille.
• Rinse both with clean, lukewarm water without the use of soap.
• Replace the evaporator grille and filter screen to their original positions.

NOTE The evaporator grille must be installed the correct way round, otherwise, you may experience water leakage from the grille.

NOTE
If the water pump is not working or functioning abnormally, you must clean the water inlet. If water cannot be drained, you need to disassemble and clean the bottom valve and the valve core. Clean the inside of the outlet valve and replace it in its original position.
In order to achieve optimal performance, make sure there is ample clearance around the unit when it is in operation. Otherwise, the service life will be affected and in severe cases the motor can burn out.

Relocation of the unit
If the unit needs to be moved to another position, it must be done slowly and carefully, to avoid the water in the tank overflowing. We recommend that the water tank is removed before the unit is moved.

Control panel

• WIND/TYPE:
  • SMILEY: Smooth breeze.
  • WOOD: Natural varied breeze – the blowing speed changes from 2 to 7.
  • NAT: Lowered natural breeze – the blow speed changes from 8 to 1, every half hour, and continues with blow speed 1.
• COOL: Start cooling function
• TIMER: The air cooler can be set to cool for a period from a minimum of 1 hour up to a maximum of 12 hours. When the timer is set, the “H” indicator lights up
• H-SWING: The exhaust air spreads from side to side.
• V-SWING: The exhaust air is spread up and down.
• SPEED: Each press decreases the ventilation speed
• SPEED+: Each press increases the ventilation speed
• POWER: When the unit is switched on, the unit automatically starts with blowing speed 5, 05 appears on the display and the “S” indicator lights up. The display alternates every five seconds between showing the temperature and blowing speed.

Remote control

• POWER: ON/OFF.
• COOL: Cooling function ON/OFF.
• SPEED: Decrease the speed.
• SPEED+: Increase the speed.
• V-SWING: Vertical airflow spread ON/OFF.
• H-SWING: Horizontal airflow spread ON/OFF.
• MODE: Select air flow type.
• TIMER: Adjust and set the Timer.

Safety instructions

IMPORTANT
Use a standard power supply of AC 220 V ~ 50 Hz. After filling with water, do not tilt or bump into the unit. The unit must not tip over when it is in operation, as otherwise, an accident may occur.

• The air cooler must not be covered and avoid placing anything heavy on top of it. The air exhaust must not be blocked and there must be an obstructed space of at least one meter in front of and behind the unit in order for the air to be able to flow freely.

• The working temperature for this unit is between 0 °C – 40 °C. The device must not be placed in extremely high or low temperatures. In summer when it is very hot, the quality of the water deteriorates faster and can begin to smell. It should therefore be frequently replaced.

• Use a damp cloth to clean the outside (possibly with a small amount of cleaning agent). Do not use corrosive cleaning agents or solvents for this purpose, because it will ruin the surface of the unit. Rinsing with water is not allowed.

• During storage or transport the water tank must be emptied. Allow the unit to blow without cooling until the filter is completely dry before packing the unit. This to avoid the formation of mold on the filter.
  Remove the plug from the electricity socket when the unit is not in use for extended periods.

• If the power cord is damaged, it must only be replaced by the manufacturer, their service agent, or a similarly qualified professional.

• This appliance is not intended for use by anyone (including children) who has impaired physical, sensory, or mental capacity or anyone who lacks the required experience and knowledge, except under supervision or after training in the use of the device by a person, who is also responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

Technical specifications

The above technical data is for reference only. We reserve the right to change them without notice.

Electric circuit description

Service
If you have any questions or need more information, please feel free to call eeese Customer service on +45 6916 3200
If you need service or to make a warranty claim, you must create a case directly in our support system by clicking on www.eeese- aircare.com/SUPPORT

Warranty

Limited warranty
We guarantee that all parts are free of defects in materials and workmanship for two years from the date of purchase. The warranty covers only material or manufacturing defects that prevent the product from being able to be installed or operated in a normal way. Defective parts will be replaced or repaired. The warranty does not cover transportation damage, any use other than what is intended, damage caused by incorrect assembly or improper use, damage caused by impact or other error, damage caused by frost cracking or by improper storage. The warranty becomes void if the user modifies the product. The warranty does not include product-related damage, property damage or general operational loss.

The warranty is limited to the initial retail purchase and cannot be transferred and it does not apply to products moved from their original location. The manufacturer’s liability cannot exceed the repair or replacement of defective parts and does not include labour costs to remove and reinstall the defective part, transportation costs to and from the service center, and all other materials necessary to repair.

This warranty does not cover failure or malfunction as a result of the following:

• Lack of proper installation, operation, or maintenance of the unit by our published “User’s Guide” supplied with the unit.
• The workmanship of any installation of the unit.
• Misuse, alteration, accident, fire, flood, lightning strike, rodents, insects, negligence, or unforeseen events.
• Scaling, freezing up, or other conditions that are due to insufficient water circulation.
• Use of non-factory authorized parts or accessories in conjunction with the product.

Limitation of liability
This is the only warranty provided by the manufacturer. No one is authorized to make any other warranties on our behalf. This warranty is instead of all other warranties, expressed or implied, including but not limited to any implied warranty of fitness for a particular purpose and saleability. We expressly disclaim all liability for consequential damage, accidental damage, indirect loss, or loss related to a breach of the expressed or implied warranty. This warranty gives you specific legal rights, which may vary by country.

Complaints
In the event of any warranty claim a valid purchase receipt must be presented. Read about raising a warranty claim under the SERVICE section.

IMPORTANT!
If you need technical help – contact eeese Air care ApS on the service hotline: DK-telephone +45 6916 3200
We have specialist knowledge of our products and the field in general, so you can get help quickly and easily.

Responsible Disposal
This symbol indicates that this product should not be disposed of with general household waste. This applies throughout the entire EU. To prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of responsibly. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

MV-2512-06-2022 . eeese-aircare.com © All rights reserved eeese air care ApS

Thank you for choosing this product.
Please read this instruction manual before using it.

eeese air care . info@eeese-aircare.com
Web: eeese-aircare.com
MV-2512-06-2022

References

• Indoor climate products for a healthier home
• Indoor climate products for a healthier home
• Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>