ACOUSTICS GT46 TWS Bluetooth Headset User Manual

July 8, 2024
ACOUSTICS

ACOUSTICS GT46 TWS Bluetooth Headset

Specifications:

  • Compliance: Part 15 of FCC Rules
  • Conditions: Must not cause harmful interference, must accept any received interference
  • Restrictions: Antenna(s) must not be co-located or operated with other antennas/transmitters
  • RF Exposure: Meets general RF exposure requirements in portable conditions without restriction

Product Usage Instructions
Compliance with FCC Rules:
This device complies with Part 15 of the FCC Rules. Ensure that the device does not cause harmful interference and accepts any received interference.

Modifications
Do not make changes or modifications to the unit that are not expressly approved by the responsible party for compliance, as it could void the user’s authority to operate the equipment.

Antenna Usage:
Avoid co-locating or operating the device’s antenna(s) with any other antenna or transmitter to maintain proper functionality.

Radiation Exposure:
The device has been evaluated to meet general RF exposure requirements in portable conditions without any restrictions. Follow safety guidelines for proper usage.

FAQ (Frequently Asked Questions)
Q: Can I modify the device on my own?
A: No, any modifications should be approved by the responsible party for compliance to avoid voiding your authority to operate the equipment.

Packing list

Product diagram

Tips

  1. Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
  2. Don’t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
  3. If any liquid enters the product by accidentally please disconnect and remove the connection immediately.
  4. Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electric-shock.
  5. Do not put the product near by the heat source or expose it to the fire source directly.
  6. Do not put the product in an environment with strong electromagnetic force, otherwise, it will cause product malfunction.

Product spec1f1cat1on

  • BT version: V5.4 Transmission distance: 210m |
  • Speaker unit: Ф14.2mm 160 sensitivity: 118+3dB 1kHz
  • Frequency response range: 20-20kHz rated
  • power: 10mW Music playing time: 4.5 hours
  • Charging time (headphones): 1.5 hours
  • Charging time (charging case): 1.5 hours
  • Battery capacity (charging case): 300mAh
  • Battery capacity (headset):40mAh
  • Number of charges available for headphones: 3 times

Product operation instructions

  1. Power on: Method 1. Remove the headphones from the charging compartment and the headphones will automatically turn on. Method 2. Press and hold the left/right multifunction button for 3 seconds, The blue light is on for 1 second, and the headphones are turned on. (Voice prompt tone: “power
  2. Shutdown: Method 1: Replace the charging box, and the headphones will automatically turn off. Method 2. The headphones are not connected within 3 minutes The device automatically shuts down. (Voice prompt tone: “power off”)
  3. Bluetooth pairing:
  4. Remove the headphones from the charging compartment, and the left and right headphones will automatically enter Bluetooth pairing mode, waiting for a connection. (Voice prompt tone: “pairing”)
  5. Open Bluetooth on your phone, search for the device name ” TWS ” and click to enter the connection. (Voice prompt tone: “connected”)

Wearing method

  1. Hold the ear with one hand and hang the earphones over your ears.
  2. Rotate and adjust the horn position of the earphone, moving it up and down until the earphone completely fits the outline of the ear.
  3. Pay attention to distinguish the wearing position of L/R, if it is reversed, it cannot be worn up.

LED indicator status

Touch operation

Restore factory settings

  1. If the headset is not connected to the device after being powered on, click any headset function key five times to restore the factory Settings and shut down the headset.
  2. When the headset is connected to the device, click any headset function key five times, and hold down any headset function key for 10 seconds within 3 seconds. After restoring factory Settings, power off the device.

The name and content of harmful substances in the earbuds

Warranty Statement

Disclaimer

This user manual does not have any form of guarantee, position expression or other implication.The mentioned products, specifications and information are for reference only, and the content will also be updated on the web at any time without additional separate notice.

Warranty statement:

The product attached to this document is guaranteed as follows:If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality detects damaged, can be repaired.Free repair;free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the ticket date shal prevail if the purest se date cannot e deemed ed by sale warranty period shall be 13 (13) months If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.

The above guarantee does not apply to the following situations:

  1. Exceeding the validity period of the three packs;
  2. Altering the warranty card and product code does not match the product body;
  3. Causes caused by misuse, abuse or improper transportation,use, maintenance or storage obstacles or damage;
  4. Failure or damage caused by force majeure (such as earthquake, war ,disease- Ter,etc.) or accident bad:
  5. The zipper and tower buckle are damaged due to excessive force;
  6. Disconnection or tearing caused by excessive load; /.Any damage caused by sharp objects;
  7. Products with signs of burning of flooding:
  8. Damage caused by unauthorized disassembly;
  9. Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
  10. .If the original identification label of the product is changed or damaged, this guarantee will become invalid.

The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products. and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application,please cooperate with the seller to fill it out and keep it for future use!

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ACOUSTICS User Manuals

Related Manuals