sauermann Si-PRO-U Series Probes Si-ACC-ETP Adaptor User Guide
- July 8, 2024
- sauermann
Table of Contents
sauermann Si-PRO-U Series Probes Si-ACC-ETP Adaptor
These operating instructions describe how to install the Si-PRO-U-W and Si- PRO-U-I-100-H probes properly. Please refer to the operating instructions available at sauermanngroup.com for safe use of the transmitters and detailed information. Do not give these devices to a child.
Symbols used
For your safety and in order to avoid any damage of the device, please read
carefully the notes preceded by the following symbol:
Si-PRO-U-W probe
To install the probe on a wall, make a cutting of Ø 25 mm in the wall. Then
drill 2 holes as shown beside. Insert the probe into the wall and fix it with
the 2 screws (supplied with the probe).
Important information about the probe mounting
Please respect the following information about the probe mounting in order to avoid any damage on the probe.
Proper screw fixing: the screws have their heads flush with the filter.
Si-PRO-U-I-100-H probe
The Si-PRO-U-I-100-H needs to work in combination with the Si-PRO-T-150 probe or any 3-wire Pt100 probe connected to the Si-C320 transmitter using the Si- ACC-ETP accessory. This will allow the Si-Pro-U-I-100-H to provide relative humidity and temperature measurements.
- The temperature indications on the transmitters/probes refer only to the measuring range of the transmitters. Do not subject the handles or power cables to temperatures above 50°C (122°F) if they are not expressly designed for higher temperatures.
- After the measurements, before storing the probe, wait for the probe to cool down. A hot probe can cause burns.
- Follow these important steps to get the most accurate measurements:
- Place the entire Si-PRO-U-I-100-H probe into your measurement environment. If the Si-PRO-T-150 probe is used, it must be placed entirely into the measurement environment and close to the Si-PRO-U-I-100-H probe.
- Enter manually the atmospheric pressure in the Si-C320 transmitter (see the complete user manual of the Si-C320).
Register your product online to confirm your warranty and benefit from the full Sauermann range.
Documents / Resources
|
sauermann Si-PRO-U Series Probes Si-ACC-ETP
Adaptor
[pdf] User Guide
Si-ACC-ETP, Si-PRO-T-150, Si-C320, Si-PRO-U Series Probes Si-ACC-ETP Adaptor,
Si-PRO-U Series Probes, Probes, Probes Si-ACC-ETP Adaptor, Adaptor
---|---