Magic G05 Smart Glasses User Manual

Magic G05 Smart Glasses

Product Specifications:

• Compliance: FCC Part 15
• RF Exposure : General RF exposure requirement met
• Portability: Suitable for portable use without restrictions

Product Usage Instructions

1. FCC Compliance:
   This device complies with part 15 of the FCC Rules. To ensure proper operation, make sure the device is not causing harmful interference to other devices and is able to accept any interference it may receive.

2. Modifications:
   Do not make any changes or modifications to the device that are not expressly approved by the responsible party for compliance. Unauthorized modifications could void the user’s authority to operate the equipment.

3. RF Exposure:
   The device has been evaluated to meet general RF exposure requirements. It is safe for use in portable exposure conditions without any restrictions. However, ensure that you follow general safety guidelines for electronic devices.

Switch machine

• Power on: Open the glasses legs (ankle magnet and Hall generate magnetic logic)
• Shutdown: Close the glasses legs (ankle magnet and Hall cut magnetic logic), Automatic shutdown when the battery level is below 3.2V

Pairing

After the smart glasses are turned on, turn on the Bluetooth of the mobile phone, search for the device name G05 and connect.

( Note : Smart glasses automatically shut down when charging.)

Note : After turning on any temple, you will be prompted in Chinese or English if you click on any of the temples 4 times in a row

Music

• Music pause/play: Glasses can be clicked freely on the left and right legs
• Music switch: Double-click on the left leg of the glasses to switch to the previous track

Double-click on the right leg of the glasses to switch to the next track

Volume

• Volume reduction : Long press the left leg of the glasses for 2 seconds
• Volume increase: Long press the right leg of the glasses for 2 seconds

( Note : The music volume can also be adjusted on the phone)

Remote camera

Remote control photo: Hongmeng and Android click on their glasses one by one to remotely control their left and right legs for taking photos, (Some Android devices hit their glasses left and right legs three times in a row)

IOS system, continuously tapping the left leg of the glasses three times to enter remote control for photography

Voice assistance

Wake up the voice assistant: Touch and click on the right leg of the glasses three times

( Note : Click to cancel the voice assistant)

Recharge

Magnetic charging: The red breathing light comes on when charging, and the green light comes on when fully charged

( Note : in the charging state, the glasses will automatically shut down)

Phone

• Call answering/hanging up: Glasses can be clicked freely on the left and right legs

• Reject a call : Press the left and right legs of the glasses for 1.5 seconds
  ( Note : In music mode, priority is given to incoming calls)

• Battery level below 3.4V: Reminder every 1 minute until shutdown The low battery alarm lasts for about 5 minutes from the start to the shutdown

• Battery master-slave switching : 20% difference in battery level between left and right ears

• Electricity level below 3.2V : Low battery shutdown

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

Q: Can I modify the device to enhance its performance?
A: No, any changes or modifications not approved by the responsible party may void your authority to operate the equipment and could be unsafe.

Q: Is the device safe for use in portable conditions?
A: Yes, the device has been evaluated for general RF exposure requirements and can be used in portable conditions without restrictions. Just ensure you follow standard safety practices.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>