SK magic WPU-IAC302 Ice Making Water Purifier Instruction Manual

SK magic WPU-IAC302 Ice Making Water Purifier

Specifications

• Model: WPU-IAC302
• Product Type: Ice-making Water Purifier (Hot / Cold / Ambient)
• Model Number: M510300023 (REV.01)

Product Information

• Safety Information
  It is important to follow the safety instructions provided in the manual to prevent any potential injuries or product damage.

• Installation
  The product should be installed in a suitable location with proper water supply and drainage connections. Ensure a minimum distance of 10cm from surrounding objects for proper ventilation.

• Features
  The product features a slim design, UV sterilization, and intuitive control panel with status indicators for easy operation.

• Product Description
  The product includes a control panel for selecting water temperature and volume, ice outlet, drip tray, cooling fan, and radiator grill for efficient operation.

• Control Panel
  The control panel allows users to dispense hot, cold, or ambient water, select water volume, adjust brightness, activate UV care, and lock functions for added safety.

How To Use

• Usage Cautions: Avoid splashing water into the outlet to prevent contamination. If ice fails to dispense smoothly, press the Ice Dispense Button multiple times.
• Operation Method: Select water volume by pressing the Volume button. Choose water temperature by pressing the corresponding buttons. Dispense water or ice based on your selection.

Additional Functions
The product offers additional functions such as UV care for sterilization, mute function, brightness adjustment, setting infant water temperature, and lock function for cold, hot, or ice dispensing.

FAQ

• Q: What should I do if the ice does not dispense smoothly?
  A: Press the Ice Dispense Button multiple times for a few seconds each to ensure smooth dispensing.

• Q: How can I adjust the water volume?
  A: Press the Volume button to cycle through different water volume settings and select your desired volume.

• Q: How do I activate the UV care function?
  A: Press the UV Care Button to activate the UV sterilization function for the water purifier.

Ice-making Water Purifier
( Hot / Cold / Ambient )
WPU-IAC302

• Please read the safety precautions in this manual thoroughly before use to ensure safe operation.
• Please store the manual in a safe location close to the appliance for future reference.
• The structure and exterior of the appliance may be enhanced for quality improvement without prior notice.

Safety Information

• The following precautions are for the safe and proper usage of this product. Be sure to follow them to prevent unexpected risks and damage.
• If used incorrectly, safety-related precautions are classified according to the expected risk, the magnitude of damage, and the level of risk.
• This product should not be used by anyone who lacks physical, sensory, or mental abilities, or by those who lack experience and knowledge (including children) about how to safely use the device without supervision or instruction.

WARNING
If these warnings are not observed, there is a possibility of serious injury or death.

CAUTION
If these cautions are not observed, there is a possibility of injury or product damage.

WARNING

• Do not use anything other than AC220V-240V.
  Failure to do so may cause an electric shock or fire.

• Do not repeatedly insert and remove the power plug.
  This may result in electric shock, fire, or product damage.

• Do not use a damaged power cord/plug or a loose power outlet.

  • This may result in electric shock or fire due to a short circuit.
  • If the power cord is damaged, contact the purchased store or the customer center for replacement.

• Do not excessively bend, pull, twist or tie the power cord.
  This may result in electric shock or fire due to a short circuit.

• Do not place any heavy objects on the power cord.
  This may result in electric shock or fire due to a short circuit.

• If any foreign materials (dust, water, etc.) are on the terminal or contacts of the power plug, clean them completely before use.
  Failure to do so may cause an electric shock or fire.

• Completely remove water from your hands before inserting or removing the power cord from the power outlet.
  It may cause electric shock.

• Use a single outlet with a ground terminal rated at 15 A or greater.

  • Multiple connections to a single power outlet may lead abnormal overheating, which may result in fire.
  • A power outlet without a ground terminal may pose a risk of electric shock due to a short circuit.

• Do not install the product outdoors or in a place exposed to direct sunlight, in a place near the bathroom, or in front of an air conditioner or heater.

• Do not connect the power cord to any other cable or change the cord at your own discretion.
  Failure to do so may cause an electric shock or fire.

• Do not place any heating device or spark-generating device near the product.
  This may result in fire.

• Install the product with 10 cm or more of space on all sides for sound airflow.
  Failure to do so may result in fire due to overheating.

• Be careful not to damage the refrigerant piping when moving or installing the product.
  Failure to do so may result in sparks resulting in fire and burn injuries.

• After installation, check if the source water supply hose has any leaks by opening the source water supply valve.

• Failure to do so may result in electric shock or a short circuit.

• Do not move the product during operation.
  This may result in electric shock or product failure.

• Do not disassemble or repair the product at your discretion.

• Failure to do so may cause fire or an electric shock.

• Do not insert any wires or tools in the mechanical compartment.
  This may result in electric shock or product failure.

• Avoid subjecting the product to any heavy impacts.
  Failure to do so may result in electric shock, product damage, or product failure.

• Do not insert fingers or other objects in the heat-dissipating fan (exhaust).
  This may result in electric shock or injury.

• Do not obstruct the back and sides of the product with covers, etc.
  If the vent is blocked, the internal temperature will rise, causing a malfunction or stopping the system.

• Do not spray any pesticides or flammable liquids during operation.
  This may result in fire or product failure.

• Avoid allowing water to enter the product.
  This may result in fire or electric shock.

• Do not lean on or hang on the product.
  This may result in product damage, product failure, or injury.

• If the gas (town gas, propane, etc.) leaks, do not touch the product or the power cord. Immediately open a window for complete ventilation.
  If a spark is created, it may result in an explosion, fire, or burn injuries.
  If the gas (refrigerant) leaks, do not touch the product or the power cord. Immediately open a window for complete ventilation.
  If water leaks out of the product or is found around the product, immediately close the source water supply valve and remove the power plug from the outlet. Then, contact the customer service center.

• Failure to do so may result in electric shock.

• Remove the power plug before cleaning the product.
  This may result in fire or electric shock.

• Do not spray water on the product or use thinners, benzene, or alcohol to clean the product.
  This may result in discoloration, deformation, damage to the product, electric shock, or fire.

• If any abnormal noise, burning smell, or smoke is detected from the product, immediately close the source water supply valve and remove the power plug from the outlet. Then, contact the customer service center.
  Failure to do so may result in electric shock or fire.

• When replacing the filter, please replace it after unplugging the power plug.
  It may cause electric shock.

• Do not install in a location exposed to water, such as dripping water or rain; a bathroom; outdoors; a place with high humidity; or a place where the ambient temperature is below 4°C.
  This may result in electric shock, fire, or product failure.

CAUTION

• If the tap water is cut or the product is not in use for a long period, close the source water supply valve and unplug the power cord.
  Failure to do so may result in abnormal water quality or water leakage.

• Do not place the product on a slanted surface or unstable floor.
  This may result in abnormal vibrations, noises, or a malfunction.

• Do not place the product on a table in a way that allows it to stick out over the edge of the table.
  This may result in product damage.

• Ensure to secure the drain hose
  Drain water may splash into other places.

• Connect the source water supply hose to the back of the product. Do not place any heavy objects on the product.
  This may result in product failure or injury.

• Do not place any cup or other object on the water collector grill when the product is not in use.
  The cup could fall and cause damage or injury.

• Do not use the water collector grill for any purpose other than water collection.

• To move the product, do not pull the power cord or connection hose or hold the ice spout.
  This may result in product damage.

• Do not leave the product in subzero conditions.
  This may result in malfunction or product failure.

• Do not remove the hose from the back of the product during use.
  This may result in product failure due to water leakage.

• If the product is not in use for a long period, close the source water supply valve and unplug the power cord.

• Do not use the product in a manner not described in the user manual.

• Install the product at least 2m away from electronic products, such as induction heating (IH) microwave ovens and electric pressure cookers.
  Failure to do so may result in electromagnetic interference.

• When the product is used by persons with disabilities who lack physical, sensory or mental abilities (including children), supervision or special instructions are required.
  It may cause injury.

• When discharge ice, place the container close to the ice spout to avoid splashing the ice.
  The contents of the cup may splash due to falling ice.

• Do not put foreign objects into the ice spout or block the outlet.
  This may result in product failure.

• This product should not be used by anyone who lacks physical, sensory, or mental abilities (including children), or by those who lack experience and knowledge about how to safely use the device without supervision or instruction.

• When positioning the appliance, ensure the supply cord is not trapped or damaged.

• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• The water inlet of this appliance shall not be connected to inlet water obtained from any other water heating system.

Installation

• Where to Install
  Install the product on a solid and even surface at least 10 cm away from the wall.

• After Installation
  When newly installed or relocated, connect the power only after 30 minutes have elapsed.

• Drain Hose Connection

  • When connecting the drain hose, ensure that the hose is not bent or stacked under a heavy object. When the hose is clogged, water will not flow smoothly which may result in potential malfunction.
  • Ensure that the drain hose is fixed tight to prevent splashing. Water from the drain hose can be used for chores such as toilet cleaning, general cleaning and laundry to prevent wastage of water. However, NEVER drink or use the water for consumption.
  • Do not raise the drain hose higher than the installation surface or connect it more than 20 meters away from the product. Should the drain hose inevitably have to be connected to a floor drainage such as in a kitchen, ensure that the hose is not raised more than 4 meters from the floor.

Features

• Slim size (width 255mm) to maximise kitchen space.
• Vast ice production, ice storage and water dispense volume despite its slim size.
• Periodic water tab and ice room UV Care for hygienic usage and maintenance.
• Tankless instant cooling method using ice thermal storage for cleaner and fresher water.
• High efficiency invertor compressor and instant heating system for reduced electricity consumption.
• Easy touch control for convenient temperature and volume selection.
• [Dispense] indicator light indicating the temperature and operation status with its intuitive lighting and movement.

Product Description

Front

1. Control Panel
2. Ice Dispense Button
3. Water Dispense Button
4. Ice Outlet
5. Water Tab
6. Drip Tray
7. Top Cover
8. Side Cover

Back

1. Rear Cover
2. Power Socket
3. Water Inlet Hose
4. Faucet Inlet Hose
5. Radiator Grill
6. Drainage Outlet Hose

Accessories

Control Panel

WPU-IAC302

1. UV Care Button
2. Lock Button
3. Hot Water Button
4. Ambient Water Button
5. Cold Water Button
6. Volume Control Button
7. Ice Full Display
8. Ice Dispense Button
9. Water Dispense Button

Buttons and Indicators

• Displays the UV Care operation status.
  • The indicator light is ON when automatic or manual UV Care is in progress.
  • The indicator light is OFF when automatic or manual UV Care is on standby.
• Press the [UV Care] button once to activate manual UV Care when the [UV Care] button indicator light is OFF.
• Press the [UV Care] button once to deactivate UV Care when the [UV Care] button indicator light is ON.

****| Use this button to lock/unlock functions.

• When any one of the lock functions (Cold, Hot, Ice) is activated, the [ Lock ] button indicator light switches ON.
• When none of the lock functions are activated, the [ Lock ] button indicator light switches OFF.

• Use this button to select hot water temperature settings
  Each time the [ Hot ] button is pressed, the temperature will change in the following order : Hot  Tea   Infant.

• Press and hold for 5 seconds to change the infant water temperature.

|

• Use this button to select ambient water.
• Press and hold for 5 seconds to adjust the brightness.

| Use this button to select cold water.
|

• Use this button to select volume settings.
  Each time the [ Volume ] button is pressed, the volume settings will change in the following order : 120ml 250ml   500ml   1,000ml.

•  Press and hold for 5 seconds to Mute/Unmute button sound.

| •      Ice Full indicator light switches ON when the ice room is full with ice.
| •      Press and hold the [ Ice Dispense ] button to dispense ice.
| •      Press the [ Water Dispense ] button once and the water will be dispensed according to the temperature and volume selected.

How To Use

Usage Cautions

CAUTION

• Close the lid of the ice room after cleaning.
  If the lid of the ice room is not properly closed, insects such as ants may enter the ice room.

• If the touch button does not function when touched, try using your thumb to widen the contact area of the button.

• When dispensing ice, refrain from using a glass cup or dispensing ice with beverage or hot water contained within.

  • The glass cup may break due to sudden temperature change or impact.
  • When water splashes into the outlet, contamination and mold may be caused.
  • When ice is dispensed into a cup filled with hot water, there is a risk of burn from splash.

• When liquid splashes on the ice outlet, clean both the interior and exterior of the outlet immediately and also clean the outlet regularly once a week.

• Clean the ice dispense guide once a week.

• If ice has not been dispensed for a long time, ice may stick to each other and ice may not be dispensed smoothly. In this case, press the [Ice Dispense] Button 3 or 4 times for 3- 4 seconds each time.

Operation Method

Selecting water volume
Press the [Volume] button and select the desired water volume.

• Each time the [Volume] button is pressed, the volume will change in the following order : 120ml 500ml 1,000ml.
• The default volume is automatically set to 120ml if no manual selection is made for a certain period of time.

Selecting water temperature
Select the desired water temperature.

• If the indicator light is switched on for the desired temperature, you do not need to press the button.
• The color of the indicator light changes according to the water temperature selected.
  • Cold : Blue
  • Ambient : Green
  • Hot : Red
• Each time the [Hot] button is pressed, the temperature will change in the following order : [Hot] [Tea] [Infant].
• The default temperature is automatically set to Cold or Ambient if no manual selection is made for a certain period of time after selecting [Hot].
  It automatically changes to Cold or Ambient depending on the last temperature used.

Dispensing water
Press the [Water Dispense] button.

• Water automatically stops dispensing once the selected volume of water has been dispensed.
• The [Water Dispense] indicator light blinks according to the selected water temperature and stops dispensing when pressing the [Water Dispense] button again.

Dispensing ice
Press the [Ice Dispense] button.

• Ice is dispensed when [Ice Dispense] button is pressed and the [Ice Dispense] button indicator light blinks.
• It may take some time for ice to be dispensed when ice storage is low in the ice room.

Additional Functions

UV Care

• How to activate the Manual UV Care function.
• Press the [UV Care] button once to activate manual UV Care when the [UV Care] button indicator light is OFF.
• The indicator light is ON when automatic or manual UV Care is in progress.
• The indicator light is OFF when automatic or manual UV Care is on standby.

Mute function

• Press and hold the [Volume] button for 5 seconds.
• The Mute function turns ON/OFF together with a beep sound.

Adjusting brightness of water/Ice Dispense Button
Press and hold the [Ambient] button for 5 seconds.

• The [Ambient] button indicator light blinks with a beep sound.
• Each time the [Water Dispense] button is pressed, the brightness will change in the following order : Off High Low.
• Upon completing the brightness adjustment, wait for 7 seconds or press the [Ambient] button to complete the setting with a beep sound.
• When pressing the [Water Dispense] button after button brightness has been set to OFF, the [Water Dispense] indicator light will blink in the colour of the temperature selected during dispense and switch back OFF 5 seconds after water has been dispensed.
• When pressing the [Ice Dispense] button after button brightness has been set to OFF, the [Ice Dispense] indicator light will blink during dispense and switch back OFF
  5 seconds after water has been dispensed.

Setting infant water temperature
Press and hold the [Hot] button for 5 seconds.

• The [Infant] indicator light blinks with a beep sound.
• Each time the [Water Dispense] button is pressed, the brightness of the [Water Dispense] button will change in the following order : Low Moderate High.(High: 55˚C, Moderate: 50˚C, Low: 45˚C)
• Upon completing the infant water temperature control setting, wait for 7 seconds or press the [Hot] button to complete the setting with a beep sound.
• The default infant water temperature setting is 50°C.

Lock Function On/Off : Cold, Hot, Ice
Press and hold the [Lock] button for 5 seconds.

• The indicator lights of the functions that can be locked (Cold/Hot/Ice) starts blinking with a beep sound and indicator lights of the functions that are already locked switches OFF.
• Press the button of the function you want to lock and the indicator light of the function will switch OFF.
• If you press the button of a function that is in a locked state, the indicator light will start blinking.
• Wait for 7 seconds or press the [Lock] button once to complete the lock setting with a beep sound.
• The [Lock] button indicator light will switch ON when any one of the functions (Cold/Hot/Ice) are locked.

Filter Replacement

CAUTION

• Replace the filter according to the recommended replacement cycle.
  The purification volume and effect may be reduced when filter is not replaced promptly.

• Ensure that the power plug is unplugged when replacing the filter.
  There is a risk of electric shock if you touch the power plug with wet hands.

1. Close the water supply valve and select Cold or Ambient water. Press the [Water Dispense] button and completely drain the water inside the filtration unit.
2. Unplug the power cord.
3. Remove the top cover as shown in the picture.
4. After removing the fittings from the filter to be replaced, replace the new filters. (use a proper tool for the separation)
5. Assemble the filters, fittings and filter cover in the reversed order.
6. Open the water supply valve and check the filter connectors for leaks.
7. Insert the power cord.

NOTE

• To purchase or replace your filter, please contact the Customer Service Center at 1800 18 7878.
• Our service agent will get in touch with you to during the month your filter replacement is due.
• Filter Replacement Period
• The filter replacement period is defined as the period in which the filter can perform at its maximum performance and capacity.
• Filter replacement period may be shortened if the water quality in the location installed is poor or if the usage is excessive.

Water Flow Diagram
The water purification system is composed as shown in the illustration below.

CAUTION

• Do not disassemble the product at your own discretion.
  Failure to do so may cause fire or an electric shock.

WPU-IAC302

• Ensure that each filters are cleaned upon product installation or filter replacement.
• Flush the filters for approx. 10 minutes (based on a water flow of 20L at approx. 1 kg/cm2). Bubbles or dark water may come out due to the nature of the filters. However, please note that this only occurs during the initial flushing and does not affect the purification performance of the filters.

NOTE

Purified water comes out white
This is a state that may temporarily occur for tankless type water purifiers when micro bubbles are formed when water is dispensed. The micro bubbles will naturally disappear and has no effect on the water quality. White minerals may form when purified water from the water purifier is boiled. These deposits are mineral components and not contaminants.

Cleaning Method

Before Cleaning

1. Close the source water supply valve connected to the water supply pipe of the sink or the ball valve on the back of the product.
2. To clean the ice room, remove all the ice by pressing and holding the [Ice Dispense] button.
3. Unplug the power cord.

Product Exterior and Outlet

1. Use a cleaning agent made exclusively for plastic products, or use a wet cloth, to clean the exterior.
   CAUTION Do not clean the product with thinners, benzene, or alcohol.

2. After wiping the water outlet with a wet cloth, remove moisture with a dry cloth.

Drip Tray

1. Remove the drip tray by hand.
   Be cautious of water that is collected in the drip tray.

2. Remove the grill from the drip tray and clean with running water or a soft brush.
   Drip tray may be damaged when cleaned with a sharp object.

3. Dry the drip tray in a cool shaded place and reassemble the drip tray.

Ice Outlet

1. Pull out the ice outlet guide according to the direction of the arrow as shown in the image.
2. Wash the separated ice outlet guide with running water until there are no foreign substances left.
3. Remove the ice outlet cover in the order shown in the figure.
4. Wipe the ice outlet part of the product with a clean dry cloth. Wipe it all the way to the inside.
5. Assemble all the parts in the reversed order.

Ice Room

1. Remove the top case by pushing it in the direction of the arrow as shown in the image.
2. Remove the ice room cover by lifting the marked part in the direction of the arrow with a screwdriver or a long tool such as chopsticks.
3. Remove the ice tray by lifting the marked part upwards.
4. Hold the ice transfer screw by hand and pull it up to remove it.

Cooling Fan and Radiator Grill

1. Remove the dust filter for the cooling fan at the rear of the product by pulling the handle upwards.

2. Clean the front and back of the dust filter thoroughly under running water.
   Dry the dust filter before reassembly.

3. Remove the radiator grill as shown in the image before cleaning the cooling fan.
   Insert a flathead screwdriver in the marked position and press it downwards to remove the radiator grill.

4. Clean the cooling fan blades and radiator grill with a wet tissue or cloth.

5. After cleaning is completed, insert the radiator grill from the button and press to reassemble.

Troubleshooting

If you encounter a problem with the appliance, first check the table below and try the suggestions. If the problem persists, please contact the Customer Service Center.

water function is switched OFF
If the cold water indicator light is switched ON, press and hold the [ Lock ] button for 5 seconds to check whether the cold water function has been switched OFF.

• Low power supply
  Ensure that the power supply is AC220-240V.

• Water is dispensed excessively
  If large amount of water is dispensed continuously, the cold water temperature will increase. Please try again after a while.

Cold water doesn’t come out. (The product is malfunctioning)| The cooling unit is malfunctioning

If power is being supplied normally and water dispensed is still not cold enough after 2 hours, please contact the Customer Service Center.

I hear abnormal noises from the product.| There is a mechanical operation or temperature change

• The “ wing ” sound occurs when the cooling fan is operating. This is not a malfunction and should the noise be too loud, please contact the Customer Service Center.
• The “ tick ” sound occurs when the water valve is operating. This is not a malfunction.
• The water purifier consists of a compressor that produces a noise similar as of a refrigerator.
• The sound of water flowing in the product may occur. The sound is produced from the coolant circulating in the heat exchange tank. This is not a malfunction and should the noise be too loud, please contact the Customer Service Center.

I hear loud noises from the product.|

• Check the distance to the wall
  Ensure that the product is installed at least 10 cm from the wall.

• The radiator grill is clogged with dust
  Clean the radiator grill according to the cleaning method advised.

I hear loud noises from the product. (Water running and cracking sound)|

• Ice water supply and circulation sound
  This is a normal sound that occurs when water is supplied for ice making and when water is circulating for freezing.

• Ice dispense sound
  This is a normal sound that occurs when produced ice is dropped and stored in the ice room.

I hear loud noises from the product. (Air leaking sound)| Ice dispense sound
This is a normal sound that occurs when the refrigerant circulates to drop the produced ice to the ice room.
Water does not dispense.|

• Check whether the water supply valve or the middle valve (blue handle) on the rear of the product is closed. If it is closed, open the mentioned valve
• The filter’s life span is complete
  • Check the filter replacement cycle and contact the Customer Service Center.
  • If the water does not come out even after replacing the filter, close the water supply valve, remove the power cord and contact the Customer Service Center.
• The tap water has been cut
  • Lock the water supply valve and remove the power cord.
  • Open the water supply valve and insert in the power plug when the tap water starts to run.
• The connection hose is severely bent
  Check if there are any bent sections in the connection hose.

Cold/Ambient indicator light blinks sequentially.| It is not in normal operation mode
Press the [ Water Dispense ] button once to revert to normal mode.
The water is running slower.

(The product is not malfunctioning)

|

• The kitchen faucet and other water taps are being used simultaneously
  The waterflow may be reduced when the product is being used simultaneously. Try dispensing water with the kitchen faucet closed.

• The filter’s life span is complete

  • Check the filter replacement cycle and contact the Customer Service Center.
  • If the waterflow is low even after replacing the filter, contact the Customer Service Center.

• The instant hot water is under operation

  • Cold water is instantly heated hence waterflow may be slower than cold and ambient water.
  • Waterflow may be slow when installed in areas with low water pressure.

Ice does not dispense. (The product is not malfunctioning)|

• Excessive usage of ice
  There may be no ice left in the ice room due to excessive usage of ice.

• Ice making function is switched OFF
  If the lock indicator light is ON, press and hold the [ Lock ] button for 5 seconds to check whether the ice function is switched OFF. If it is OFF, switch ON the ice function and wait for the ice to be produced.

• Water cut or water supply/middle supply valves are closed

  • The water supplied for ice production may be cut off.
  • Check if the water supply valve is closed.
  • Check if the middle valve (blue handle ) at the rear of the product is closed.

• The radiator grill is clogged with dust
  Clean the radiator grill according to the cleaning method advised.

Water is leaking from the product.|

• There is a defect in an assembled (connected) area
  If a “ Ding Ding Ding ” alarm sound is heard each time the button is pressed, close the water supply valve or the middle valve (blue handle) at the rear of the product and contact the Customer Service Center.

Water tastes and smells unpleasant.|

• The product has not been used for a long period of time
  • Short term (within 10 days) : dispose 1 liter of Cold, Ambient and Hot water each continuously before use
  • Long term (more than 10 days) : Please contact the Customer Service Center if necessary.
• The product has been installed in an appropriate location and has not been used for a long period of time
  Replace all filters before using the product. (Refer to Filter Replacement section)

Microparticles are in the purified water.|

• Micro bubbles are produced when dispensing water
  If microparticles are found in the water even after 5 minutes have passed from the time water is dispensed into the cup, shake the cup left and right 5 to 6 times to check again for microparticles. If microparticles are still visible, contact the Customer Service Center to replace the filters.

If steam is sprayed while using hot water.|

• The voltage is too high (The product is not malfunctioning)
  • If the voltage is higher than the standard supply power of AC220-240V, hot water usage may not be suitable.
  • If steam is continuously produced, contact the Customer Service Center.

If there is a water cut while using hot water.|

• Bubbles are produced in the instant hot water (The product is not malfunctioning)
  Bubbles may be produced as the water is instantly heated, potentially causing water breaks.

Water is warm when using hot water.| If the instant heating module is not malfunctioning

• If the [ Water Dispense ] button blinks in red and a “ Ring ” sound continuously occurs, the instant heating module is under initialization.
• The temperature of the hot water dispensed may vary according to the type of cup used to receive water.
• If the waterflow increases suddenly due to water pressure fluctuations, the hot water temperature dispensed may be low.

NOTE
If the none of the above applies, the instant heating module is malfunctioning. Please contact the Customer Service Center to enquire for a part replacement.

Hot water doesn’t come out.| How water is locked (The product is not malfunctioning)
If the [ Lock ] button indicator is ON, press and hold the [ Lock ] button for 5 seconds to check whether the hot water function is switched OFF. If hot water does not dispense even after unlocking, please contact the Customer Service Center. NOTE
If the none of the above applies, the instant heating module is malfunctioning. Please contact the Customer Service Center to enquire for a part replacement.

Specifications

Product Name| Electric Cold Water Dispenser (Instant Water Heater and Ice Maker combined)
---|---
Model| WPU-IAC302
Net Weight| 18.5 kg
Dimensions (W x D x H)| 255 × 512 × 492 mm
Rated Voltage| AC 220-240V, 50 Hz
Cooling Method| Compressor cooling, fin tube heat sink heat exchange system
Power Consumption| Cold Water| 0.6 A / 55 W
Hot Water| 2,900 W
Ice Making| 0.65 A / 60 W
Ice Thawing| 0.7 A / 65 W
Cold Water Capacity| Tankless water type (with an ice capacity of 1.3 L)
Ambient Water Capacity| Tankless water type
Hot Water Capacity| Tankless water type
Filter| 1st – step| Sediment filter
2nd – step| Carbon Block filter
3rd – step| Nanotech PAC filter
Effective Capacity| 1,200 L
Purpose of Use| Tap water purification
Suited Usage| For home use
Ice Storage Capacity| 0.75 kg
Use Conditions| Operating Pressure| 117 – 785 kpa (1.2 – 7.0 bar)
Operating Temperature| 5 – 35 °C
Additional Features| Hot Water|
Water Tab UV Care|
Ice Room UV Care|
Climate Class| SN, N, ST, T

• The structure and exterior of the appliance may be enhanced for quality improvement without prior notice.
• The filter replacement cycle may differ depending on the water usage amount.

Disposal Guidelines

• Protecting the environment
  This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please follow the disposal guidelines below:

• Free Disposal
  If you have purchased a new SK magic product and want to dispose your existing product, the disposal will be free of charge during the delivery of your new product. (only applicable to SK magic products)

Charged Disposal

1. If you did not purchase a new SK magic product and want to dispose your existing product, you may contact your local waster management center for disposal.
2. SK magic provides chargeable product disassembly services for your convenience. (Customer Service Center : 1800 18 7878)

SK magic Customer service center 1 800 18 7878
www.skmagic.com.my

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>