LED Living SB02 Series LED Flood Light Installation Guide
- September 25, 2024
- LED Living
Table of Contents
LED Flood Light
Installation Instructions
Reminder
We appreciate your purchase!
Please read the entire instruction manual before installation and keep it for
future reference. 
Physical Dimensions (Unit: mm/inc|h)
| Product Specifications | 5W | 10W |
|---|---|---|
| Outlook Dimensions | 597x127x53mm(23 49″x4.99″x2.11″) |
1083x127x53mm(41.83″x4.99″x2.11%)
Luminaire Net Weight(+6%)| 2kg(4.41Lbs)| 3.4Kg(7.50Lbs)
Projected Area| 0.08m?(0.971t?)| 0.13m?(1.74f%)
Working Temperature| 0°C to +50°C(32°F to +122°F)
Install suggestions
Rotatable Mounting Bracket (optional)
* Reminder: The
solar panel cannot be covered
Movable Mounting Bracket (optional)
Default Working Mode:
- After the luminaire is installed, you need to manually press the switch on luminaire to activate the fixture .
| Time | Dusk | Dawn |
|---|---|---|
| 1H | 2H | 3H |
| Brightness | 100% | 70% |
100% brightness at first hour;
70% from 2nd to 4th hour;
50% from 5th to 6th hour;
20% from 7th hour to dawn or till the light turns off.
Note: the working hours depend on the local weather and sunshine.
Remote Control Operation:
* Point the remote control at the fixture
You can also activate the luminaire by pressing the ECO/AUTO key on remote
control.
Half brightness working mode:
| Time | Dusk | Dawn |
|---|---|---|
| 1H | 2H | 3H |
| Brightness | 50% | 35% |
Remark:
- The luminiare will flash once when you press any key on the remote control,which means the function is activated.
- Don’t press the AUTO/ECO/ON key once the brightness or working hours has been set, or you have to reset it.
- The luminaire gets in standby mode autimatically after it works for 3-5 cloudy and rainy days, it keeps at slight brightness but not light off. The remote control is not workable in standby mode.
Applications
- The product is designed for park walls, fences, bus stops, glass overpasses, wall billboards and similar applications. For other special applications, please consult your salesperson to confirm firstly.
- Too much dust or oil accumulation on PC lens will affect the lighting distribution and led chips performance, so cleaning the luminaire regularly to ensure longer lifespan is suggested.
- The suggested mounting height of the luminaire is 3-7 m.