EATON 261791 Electric Components Instructions
- July 6, 2024
- EATON
Table of Contents
EATON 261791 Electric Components
Specifications
- Manufacturer: TinLine GmbH
- Model: ECL1000
- Product Code: 261791
Product Information
The Electric Components ECL1000 is a high-quality electrical system designed for various applications. It is essential to follow the safety instructions provided in the user manual to ensure safe and proper operation of the system.
Product Usage Instructions
Safety Instructions
Before connecting the system, please read and follow the safety instructions provided in the manual. Failure to do so may result in danger to persons or damage to the system. Some key safety points include:
- Check the unit for any damage upon unpacking.
- Ensure safe operation can be guaranteed before use.
- Electric installation must be done by an authorized
- Operate only with a downstream ground fault circuit interrupter (max. 30mA Type A).
Installation and Operation
Follow the installation and assembly instructions carefully. Make sure that electrical connections are always accessible and can be switched off when needed. Wiring work must be performed with the power disconnected. Only operate the system with the recommended protection class and ground fault circuit interrupter.
Disposal
Any disposal of the system must be done in accordance with the applicable legal provisions. Ensure proper disposal methods are followed to comply with regulations.
FAQ
- Q: Can I install the Electric Components ECL1000 by myself?
- A: The electrical installation on site must be undertaken by authorized electricians to ensure safety and compliance with regulations.
- Q : What type of ground fault circuit interrupter should I use with this system?
- A: Use a downstream ground fault circuit interrupter with a maximum rating of 30mA Type A for safe operation.
Electrical schema and safety instructions
- The following safety instructions must be read and observed before connecting the system. Failure to do so may result in danger to persons or damage to the system. Check the unit for any damage as soon as it is unpacked If it is ascertained that safe operation cannot be guaranteed it must be taken out of service immediately and secured from unintentional operation
- The electric installation on site must be undertaken by authorised electricians Make the electric connections in such a way that they are always accessible and can be switched off Wiring work must be performed with the power disconnected The stipulated protection class is only featured for undamaged and complete housing Operation only with a downstream ground fault circuit interrupter, max. 30mA Type A.
- Local regulations and protective measures must be observed Follow the installation and assembly instructions. Any disposal must be performed according to the applicable legal provisions
Installation and wiring instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>